scholarly journals Integrated type and approximate dimensional synthesis of four-bar planar mechanisms for rigid body guidance

2005 ◽  
Author(s):  
Timothy Luu
Keyword(s):  
Rigid Body ◽  
Dimensional Synthesis ◽  
Planar Mechanisms

Designing Planar Mechanisms Using a Bi-Invariant Metric in the Image Space of SO (3)

1994 ◽  
Author(s):  
Pierre Larochelle ◽  
J. Michael McCarthy
Keyword(s):  
Rigid Body ◽  
Numerical Results ◽  
Image Space ◽  
Dimensional Synthesis ◽  
Invariant Metric ◽  
Planar Mechanisms ◽  
Position And Orientation ◽  
Position Synthesis

Abstract In this paper we present a technique for using a bi-invariant metric in the image space of spherical displacements for designing planar mechanisms for n (> 5) position rigid body guidance. The goal is to perform the dimensional synthesis of the mechanism such that the distance between the position and orientation of the guided body to each of the n goal positions is minimized. Rather than measure these distances in the plane, we introduce an approximating sphere and identify rotations which are equivalent to the planar displacements to a specified tolerance. We then measure distances between the rigid body and the goal positions using a bi-invariant metric on the image space of SO(3). The optimal linkage is obtained by minimizing this distance over all of the n goal positions. The paper proceeds as follows. First, we approximate planar rigid body displacements with spherical displacements and show that the error induced by such an approximation is of order 1/R2, where R is the radius of the approximating sphere. Second, we use a bi-invariant metric in the image space of spherical displacements to synthesize an optimal spherical 4R mechanism. Finally, we identify the planar 4R mechanism associated with the optimal spherical solution. The result is a planar 4R mechanism that has been optimized for n position rigid body guidance using an approximate bi-invariant metric with an error dependent only upon the radius of the approximating sphere. Numerical results for ten position synthesis of a planar 4R mechanism are presented.

Planar Motion Synthesis Using an Approximate Bi-Invariant Metric

1995 ◽  
Vol 117 (4) ◽  
pp. 646-651 ◽  
Author(s):  
P. Larochelle ◽  
J. M. McCarthy
Keyword(s):  
Rigid Body ◽  
Image Space ◽  
Planar Motion ◽  
Dimensional Synthesis ◽  
Invariant Metric ◽  
Motion Synthesis ◽  
Planar Mechanisms ◽  
Position And Orientation

In this paper we present a technique for using a bi-invariant metric in the image space of spherical displacements for designing planar mechanisms for n (> 5) position rigid body guidance. The goal is to perform the dimensional synthesis of the mechanism such that the distance between the position and orientation of the guided body to each of the n goal positions is minimized. Rather than measure these distances in the plane, we introduce an approximating sphere and identify rotations which are equivalent to the planar displacements to a specified tolerance. We then measure distances between the rigid body and the goal positions using a bi-invariant metric on the image space of spherical displacements. The optimal linkage is obtained by minimizing this distance for each of the n goal positions.

On nonassembly in the optimal dimensional synthesis of planar mechanisms

2001 ◽  
Vol 21 (5) ◽  
pp. 345-354 ◽  
Author(s):  
R.J. Minnaar ◽  
D.A. Tortorelli ◽  
J.A. Snyman
Keyword(s):  
Dimensional Synthesis ◽  
Planar Mechanisms

Optimum dimensional synthesis of planar mechanisms with geometric constraints

Meccanica ◽  
2020 ◽  
Vol 55 (11) ◽  
pp. 2135-2158
Author(s):  
V. García-Marina ◽  
I. Fernández de Bustos ◽  
G. Urkullu ◽  
R. Ansola
Keyword(s):  
Geometric Constraints ◽  
Dimensional Synthesis ◽  
Planar Mechanisms

A New Approach for Exact/Approximate Point Synthesis of Planar Mechanisms

2005 ◽  
Author(s):  
Ahmad Smaili ◽  
Nadim Diab
Keyword(s):  
Synthesis Method ◽  
Dimensional Synthesis ◽  
Gradient Search ◽  
Planar Mechanisms ◽  
Simple Method ◽  
New Approach ◽  
Optimum Synthesis ◽  
Approximate Synthesis ◽  
Optimum Solution ◽  
Synthesis Approach

The aim of this article is to provide a simple method to solve the mixed exact-approximate dimensional synthesis problem of planar mechanism. The method results in a mechanism that can traverse a closed path with the choice of any number of exact points while the rest are approximate points. The algorithm is based on optimum synthesis rather than on precision position methods. Ant-gradient search is applied on an objective function based on log10 of the error between the desired positions and those generated by the optimum solution. The log10 function discriminates on the side of generating miniscule errors (on the order of 10−14) at the exact points while allowing for higher errors at the approximate positions. The algorithm is tested by way of five examples. One of these examples was used to test exact/approximate synthesis method based on precision point synthesis approach.

Using Rigid-Body Mechanism Topologies to Design Shape-Changing Compliant Mechanisms

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Kai Zhao ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Shape Matching ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Shape Change ◽  
Mesh Network ◽  
Adaptive Antenna ◽  
Optimal Size ◽  
Dimensional Synthesis ◽  
Element Analysis

This paper uses rigid-body mechanism topologies to synthesize fully distributed compliant mechanisms that approximate a shape change defined by a set of morphing curves in different positions. For a shape-change problem, a rigid-body mechanism solution is generated first to provide the base topology. This base topology defines a preselected design space for the structural optimization in one of two ways so as to obtain a compliant mechanism solution that is typically superior to the local minimum solutions obtained from searching more expansive design spaces. In the first strategy, the dimensional synthesis directly determines the optimal size and shape of the distributed compliant mechanism having exactly the base topology. In the second strategy, an initial mesh network established from the base topology is used to generate different topologies (in addition to the base), and an improved design domain parameterization scheme ensures that only topologies with well-connected structures are evaluated. The deformation of each generated compliant mechanism is evaluated using geometrically nonlinear finite element analysis (FEA). A two-objective genetic algorithm (GA) is employed to find a group of viable designs that trade off minimizing shape matching error with minimizing maximum stress. The procedure's utility is demonstrated with three practical examples—the first two approximating open-curve profiles of an adaptive antenna and the third approximating closed-curve profiles of a morphing wing.

Synthesis of Planar Mechanisms for Pick and Place Tasks With Guiding Locations

2013 ◽  
Author(s):  
Pierre Larochelle
Keyword(s):  
Algebraic Geometry ◽  
Constraint Equation ◽  
Dimensional Synthesis ◽  
Motion Generation ◽  
Planar Mechanisms ◽  
Open Chain ◽  
Synthesis Algorithm ◽  
Kinematic Chains ◽  
Synthesis Technique ◽  
Kinematic Inversion

A novel dimensional synthesis technique for solving the mixed exact and approximate motion synthesis problem for planar RR kinematic chains is presented. The methodology uses an analytic representation of the planar RR dyads rigid body constraint equation in combination with an algebraic geometry formulation of the exact synthesis for three prescribed locations to yield designs that exactly reach the prescribed pick & place locations while approximating an arbitrary number of guiding locations. The result is a dimensional synthesis technique for mixed exact and approximate motion generation for planar RR dyads. A solution dyad may be directly implemented as a 2R open chain or two solution dyads may be combined to form a planar 4R closed chain; also known as a planar four-bar mechanism. The synthesis algorithm utilizes only algebraic geometry and does not require the use of a numerical optimization algorithm or a metric on planar displacements. Two implementations of the synthesis algorithm are presented; computational and graphical construction. Moreover, the kinematic inversion of the algorithm is also included. An example that demonstrates the synthesis technique is included.

Dimensional Synthesis of Planar Eight-Bar Linkages Based on a Parallel Robot With a Prismatic Base Joint

2013 ◽  
Author(s):  
Gim Song Soh ◽  
Fangtian Ying
Keyword(s):  
Rigid Body ◽  
Design Process ◽  
Parallel Robot ◽  
Degree Of Freedom ◽  
Dimensional Synthesis ◽  
End Effector ◽  
Prismatic Joint ◽  
Serial Chain ◽  
Different Types

This paper details the dimensional synthesis for the rigid body guidance of planar eight-bar linkages that could be driven by a prismatic joint at its base. We show how two RR cranks can be added to a planar parallel robot formed by a PRR and 3R serial chain to guide its end-effector through a set of five task poses. This procedure is useful for designers who require the choice of ground pivot locations. The results are eight different types of one-degree of freedom planar eight-bar linkages. We demonstrate the design process with the design of a multifunctional wheelchair that could transform its structure between a self-propelled wheelchair and a walking guide.

Sign in / Sign up

Export Citation Format

Share Document