Dual solutions for stagnation-point flow and convective heat transfer of a Williamson nanofluid past a stretching/shrinking sheet

2015 ◽  
Vol 52 (6) ◽  
pp. 1153-1162 ◽  
Author(s):  
Rama Subba Reddy Gorla ◽  
B. J. Gireesha
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Stagnation Point ◽  
Convective Heat ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Shrinking Sheet

Effects of Second-Order Slip and Magnetic Field on Mixed Convection Stagnation-Point Flow of a Maxwellian Fluid: Multiple Solutions

2016 ◽  
Vol 138 (12) ◽  
Author(s):  
M. M. Rahman
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Stagnation Point ◽  
Reverse Flow ◽  
Second Order ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Variable Surface

In this paper, we investigate the effects of second-order slip and magnetic field on the nonlinear mixed convection stagnation-point flow toward a vertical permeable stretching/shrinking sheet in an upper convected Maxwell (UCM) fluid with variable surface temperature. Numerical results are obtained using the bvp4c function from matlab for the reduced skin-friction coefficient, the rate of heat transfer, the velocity, and the temperature profiles. The results indicate that multiple (dual) solutions exist for a buoyancy opposing flow for certain values of the parameter space irrespective to the types of surfaces whether it is stretched or shrinked. It is found that an applied magnetic field compensates the suction velocity for the existence of the dual solutions. Depending on the parametric conditions; elastic parameter, magnetic field parameter, first- and second-order slip parameters significantly controls the flow and heat transfer characteristics. The illustrated streamlines show that for upper branch solutions, the effects of stretching and suction are direct and obvious as the flow near the surface is seen to suck through the permeable sheet and drag away from the origin of the sheet. However, aligned but reverse flow occurs for the case of lower branch solutions when the mixed convection effect is less significant.

scholarly journals Unsteady Stagnation Point Flow and Heat Transfer over a Stretching/Shrinking Sheet with Suction or Injection

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
M. Suali ◽  
N. M. A. Nik Long ◽  
N. M. Ariffin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Similarity Transformation ◽  
Skin Friction Coefficient ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Flow And Heat Transfer ◽  
Suction Or Injection

The unsteady stagnation point flow and heat transfer over a stretching/shrinking sheet with suction/injection is studied. The governing partial differential equations are converted into nonlinear ordinary differential equations using a similarity transformation and solved numerically. Both stretching and shrinking cases are considered. Results for the skin friction coefficient, local Nusselt number, velocity, and temperature profiles are presented for different values of the governing parameters. It is found that the dual solutions exist for the shrinking case, whereas the solution is unique for the stretching case. Numerical results show that the range of dual solutions increases with mass suction and decreases with mass injection.

Numerical solutions of non-alignment stagnation-point flow and heat transfer over a stretching/shrinking surface in a nanofluid

2016 ◽  
Vol 26 (6) ◽  
pp. 1747-1767 ◽  
Author(s):  
Ioan Pop ◽  
Kohi Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Boundary Layer Equations ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose – The purpose of this paper is to analyse numerically the steady stagnation-point flow of a viscous and incompressible fluid over continuously non-aligned stretching or shrinking surface in its own plane in a water-based nanofluid which contains three different types of nanoparticles, namely, Cu, Al2O3 and TiO2. Design/methodology/approach – Similarity transformation is used to convert the system of boundary layer equations which are in the form of partial differential equations into a system of ordinary differential equations. The system of similarity governing equations is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in Matlab software. Findings – Unique solution exists when the surface is stretched and dual solutions exist as the surface shrunk. For the dual solutions, stability analysis has revealed that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable. The effect of non-alignment is huge for the shrinking surface which is in contrast with the stretching surface. Practical implications – The results obtained can be used to explain the characteristics and applications of nanofluids, which are widely used as coolants, lubricants, heat exchangers and micro-channel heat sinks. This problem also applies to some situations such as materials which are manufactured by extrusion, production of glass-fibre and shrinking balloon. In this kind of circumstance, the rate of cooling and the stretching/shrinking process play an important role in moulding the final product according to preferable features. Originality/value – The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface for the problem considered by Wang (2008) in a viscous fluid and extends to nanofluid by using the Tiwari and Das (2007) model.

Sign in / Sign up

Export Citation Format

Share Document