A regional climate model for northern Europe: model description and results from the downscaling of two GCM control simulations

2001 ◽  
Vol 17 (5-6) ◽  
pp. 339-359 ◽  
Author(s):  
M. Rummukainen ◽  
J. Räisänen ◽  
B. Bringfelt ◽  
A. Ullerstig ◽  
A. Omstedt ◽  
...  
Author(s):  
Patrick Samuelsson ◽  
Colin G. Jones ◽  
Ulrika Willén ◽  
Anders Ullerstig ◽  
Stefan Gollvik ◽  
...  

2021 ◽  
Author(s):  
Clemens Schwingshackl ◽  
Anne Sophie Daloz ◽  
Carley Iles ◽  
Nina Schuhen ◽  
Jana Sillmann

<p>Cities are hotspots of human heat stress due to their large number of inhabitants and the urban heat island effect leading to amplified temperatures. Exposure to heat stress in urban areas is projected to further increase in the future, mainly due to climate change and expected increases in the number of people living in cities. The impacts of climate change in cities have been investigated in numerous studies, but rarely using climate models due to their coarse spatial resolution compared to the typical areal extent of cities. Recent advances in regional climate modelling now give access to an ensemble of high-resolution simulations for Europe, allowing for much more detailed analyses of small-scale features, such as city climate.</p><p>Focusing on Europe, we compare the evolution of several heat stress indicators for 36 major European cities, based on regional climate model simulations from EURO-CORDEX. The applied EURO-CORDEX ensemble (Vautard et al., 2020) has a spatial resolution of 0.11° (~11 km; comparable to the extent of large cities) and contains over 60 ensemble members, allowing thus for robust multi-model analyses of climate change on city levels. We analyze changes in heat stress both relative to the climatological heat stress variability in each city during 1981-2010 using the Heat Wave Magnitude Index daily (HWMId, Russo et al., 2015) and in absolute terms by counting the yearly number of exceedances of impact-relevant thresholds. Relative and absolute heat stress increase throughout Europe but with distinct patterns. Absolute heat stress increases predominantly in Southern Europe, primarily due to the hotter climate in the South. Relative changes are also highest in Southern Europe but exhibit a secondary maximum in Northern Europe, while being lowest in Central Europe. The main reason for this pattern is that day-to-day variability in heat stress indicators during present climate conditions is highest in Central Europe but lower in Southern and Northern Europe. Large Northern European cities, which are all located at the shore, are further influenced by different heat stress evolutions over land and sea surfaces.</p><p>As human vulnerability does not only depend on the absolute heat stress but also on what people are adapted to (i.e., the climatological range), the results of this study highlight that cities in all parts of Europe – including in Northern Europe – must prepare for higher heat stress in the future.</p><p> </p><p>References:</p><p>Russo, S., et al. (2015). Top ten European heatwaves since 1950 and their occurrence in the coming decades. Environmental Research Letters, 10(12). doi:10.1088/1748-9326/10/12/124003</p><p>Vautard, R., et al. (2020). Evaluation of the large EURO‐CORDEX regional climate model ensemble. Journal of Geophysical Research: Atmospheres. doi:10.1029/2019jd032344</p>


2016 ◽  
Author(s):  
Stefan Weiher ◽  
Naveed Akhtar ◽  
Jennifer Brauch ◽  
Marcus Breil ◽  
Edouard Davin ◽  
...  

Abstract. We present the prototype of a regional climate system model based on the COSMO-CLM regional climate model coupled with several model components, analyze the performance of the couplings and present a strategy to find an optimum configuration with respect to computational costs and time to solution. The OASIS3-MCT coupler is used to couple COSMO-CLM with two land surface models (CLM and VEG3D), a regional ocean model for the Mediterranean Sea (NEMO-MED12), two ocean models for the North and Baltic Sea (NEMO-NORDIC and TRIMNP+CICE) and the atmospheric component of an earth system model (MPI-ESM). We present a unified OASIS3-MCT interface which handles all couplings in a similar way, minimizes the model source code modifications and describes the physics and numerics of the couplings. Furthermore, we discuss solutions for specific regional coupling problems like handling of different domains, multiple usage of MCT interpolation library and efficient exchange of 3D fields. A series of real-case simulations over Europe has been conducted and the computational performance of the couplings has been analyzed. The usage of the LUCIA tool of the OASIS3-MCT coupler enabled separation of the direct costs of: coupling, load imbalance and additional computations. The resulting limits for time to solution and costs are shown and the potential of further improvement of the computational efficiency is summarized for each coupling. It was found that the OASIS3-MCT coupler keeps the direct coupling costs of communication and horizontal interpolation small in comparison with the costs of the additional computations and load imbalance for all investigated couplings. For the first time this could be demonstrated for an exchange of approximately 450 2D fields per time step necessary for the atmosphere-atmosphere coupling between COSMO-CLM and MPI-ESM. A procedure for finding an optimum configuration for each of the couplings was developed considering the time to solution and costs of the simulations. The optimum configurations are presented for sequential and concurrent coupling layouts. The procedure applied can be regarded as independent on the specific coupling layout and coupling details.


2011 ◽  
Vol 63 (1) ◽  
pp. 4-23 ◽  
Author(s):  
Patrick Samuelsson ◽  
Colin G. Jones ◽  
Ulrika Will´En ◽  
Anders Ullerstig ◽  
Stefan Gollvik ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document