scholarly journals A Comprehensive Deep Learning-Based Approach to Reduced Order Modeling of Nonlinear Time-Dependent Parametrized PDEs

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Stefania Fresca ◽  
Luca Dede’ ◽  
Andrea Manzoni

AbstractConventional reduced order modeling techniques such as the reduced basis (RB) method (relying, e.g., on proper orthogonal decomposition (POD)) may incur in severe limitations when dealing with nonlinear time-dependent parametrized PDEs, as these are strongly anchored to the assumption of modal linear superimposition they are based on. For problems featuring coherent structures that propagate over time such as transport, wave, or convection-dominated phenomena, the RB method may yield inefficient reduced order models (ROMs) when very high levels of accuracy are required. To overcome this limitation, in this work, we propose a new nonlinear approach to set ROMs by exploiting deep learning (DL) algorithms. In the resulting nonlinear ROM, which we refer to as DL-ROM, both the nonlinear trial manifold (corresponding to the set of basis functions in a linear ROM) as well as the nonlinear reduced dynamics (corresponding to the projection stage in a linear ROM) are learned in a non-intrusive way by relying on DL algorithms; the latter are trained on a set of full order model (FOM) solutions obtained for different parameter values. We show how to construct a DL-ROM for both linear and nonlinear time-dependent parametrized PDEs. Moreover, we assess its accuracy and efficiency on different parametrized PDE problems. Numerical results indicate that DL-ROMs whose dimension is equal to the intrinsic dimensionality of the PDE solutions manifold are able to efficiently approximate the solution of parametrized PDEs, especially in cases for which a huge number of POD modes would have been necessary to achieve the same degree of accuracy.

Author(s):  
Gregory A. Banyay ◽  
Mohammad Ahmadpoor ◽  
John C. Brigham

The feasibility of reduced order modeling for turbulent flows using Proper Orthogonal Decomposition (POD) based Surrogate modeling and Galerkin Projection is demonstrated for use in the hydrodynamic modeling of the Very High Temperature Reactor (VHTR) lower plenum. The lower plenum of the Helium-cooled VHTR consists of vertical cylinder arrays subjected to turbulent jetting and cross-flow. Unsteady Reynolds-Averaged Navier-Stokes (RANS) Computational Fluid Dynamics (CFD) simulations are used to acquire an ensemble of possible solution fields for flow around a circular cylinder in an open domain. Numerical results are validated to prior published literature. From the resultant data ensemble are extracted the coherent structures to create an optimal basis. POD is used to extract the coherent structures as this technique has been demonstrated to provide a basis of a chosen dimension such that the average L2-error is minimized for the best approximation of the basis to the data ensemble. The resultant optimal basis is used to construct accurate reduced order models. The computational effectiveness and insights revealed by this reduced order modeling approach are discussed for both the Surrogate modeling approach and Galerkin Projection.


2021 ◽  
Vol 10 ◽  
pp. 100129
Author(s):  
Sourav Dutta ◽  
Peter Rivera-Casillas ◽  
Orie M. Cecil ◽  
Matthew W. Farthing

Author(s):  
Mikel Balmaseda ◽  
G. Jacquet-Richardet ◽  
A. Placzek ◽  
D.-M. Tran

Abstract In the present work reduced order models (ROM) that are independent from the full order finite element models (FOM) considering geometrical non linearities are developed and applied to the dynamic study of a fan. The structure is considered to present nonlinear vibrations around the pre-stressed equilibrium induced by rotation enhancing the classical linearised approach. The reduced nonlinear forces are represented by a polynomial expansion obtained by the Stiffness Evaluation Procedure (STEP) and then corrected by means of a Proper Orthogonal Decomposition (POD) that filters the full order nonlinear forces (StepC ROM). The Linear Normal Modes (LNM) and Craig-Bampton (C-B) type reduced basis are considered here. The latter are parametrised with respect to the rotating velocity. The periodic solutions obtained with the StepC ROM are in good agreement with the solutions of the FOM and are more accurate than the linearised ROM solutions and the STEP ROM. The proposed StepC ROM provides the best compromise between accuracy and time consumption of the ROM.


2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
John Paul Roop

We introduce the variational multiscale (VMS) stabilization for the reduced-order modeling of incompressible flows. It is well known that the proper orthogonal decomposition (POD) technique in reduced-order modeling experiences numerical instability when applied to complex flow problems. In this case a POD discretization naturally separates out structures which corresponding to the energy cascade on large and small scales, in order, a VMS approach is natural. In this paper, we provide the mathematical background necessary for implementing VMS to a POD-Galerkin model of a generalized Oseen problem. We provide theoretical evidence which indicates the consistency of utilizing a VMS approach in the stabilization of reduced order flows. In addition we provide numerical experiments indicating that VMS improves fidelity in reproducing the qualitative properties of the flow.


Author(s):  
Alberto Sartori ◽  
Davide Baroli ◽  
Antonio Cammi ◽  
Lelio Luzzi ◽  
Gianluigi Rozza

In this work, a Reduced Order Model (ROM) for multi-group time-dependent parametrized reactor spatial kinetics is presented. The Reduced Basis method (built upon a high-fidelity “truth” finite element approximation) has been applied to model the neutronics behavior of a parametrized system composed by a control rod surrounded by fissile material. The neutron kinetics has been described by means of a parametrized multi-group diffusion equation where the height of the control rod (i.e., how much the rod is inserted) plays the role of the varying parameter. In order to model a continuous movement of the rod, a piecewise affine transformation based on subdomain division has been implemented. The proposed ROM is capable to efficiently reproduce the neutron flux distribution allowing to take into account the spatial effects induced by the movement of the control rod with a computational speed-up of 30000 times, with respect to the “truth” model.


Author(s):  
Vinod Vishwakarma ◽  
Alok Sinha ◽  
Yasharth Bhartiya ◽  
Jeffery M. Brown

Modified modal domain analysis (MMDA), a reduced order modeling technique, is applied to a geometrically mistuned integrally bladed rotor to obtain its natural frequencies, mode shapes, and forced response. The geometric mistuning of blades is described in terms of proper orthogonal decomposition (POD) of the coordinate measurement machine (CMM) data. Results from MMDA are compared to those from the full (360 deg) rotor Ansys model. It is found that the MMDA can accurately predict natural frequencies, mode shapes, and forced response. The effects of the number of POD features and the number of tuned modes used as bases for model reduction are examined. Results from frequency mistuning approaches, fundamental mistuning model (FMM) and subset of nominal modes (SNM), are also generated and compared to those from full (360 deg) rotor Ansys model. It is clearly seen that FMM and SNM are unable to yield accurate results whereas MMDA yields highly accurate results.


Sign in / Sign up

Export Citation Format

Share Document