One-step metal-assisted electroless chemical etching of p-type silicon substrate in NH4HF2/AgNO3 solution was investigated. The effect of different etching parameters including etching time, temperature, AgNO3 concentration and NH4HF2 concentration were investigated. The etched layers formed were investigated by scanning electron microscopy (SEM) and Photoluminescence. It was found that the etched layer was formed by well-aligned silicon nanowires. It is noted that their density and length strongly depend on etching parameters. Room temperature photoluminescence (PL) from etched layer was observed. It was observed that PL peak intensity increases significantly with AgNO3 concentration.
Piezoresistive effect of p-type silicon nanowires fabricated by a top-down process using FIB implantation and wet etching