Design and Performance Improvement of Optical Chemical Sensor Based Photonic Crystal Fiber (PCF) in the Terahertz (THz) Wave Propagation

Silicon ◽  
2020 ◽  
Author(s):  
Md. Selim Hossain ◽  
Shuvo Sen
2021 ◽  
pp. 100137
Author(s):  
Yanan Wang ◽  
Guangyu Jiang ◽  
Zijian Yu ◽  
Qingke Wang ◽  
Xiaoman Jiang

2021 ◽  
Author(s):  
Selim Hossain ◽  
Omar Faruq ◽  
Md. Masud Rana ◽  
Shuvo Sen ◽  
Md. Dulal Haque ◽  
...  

Abstract This research article demonstrates a good simulation result for identifying and detecting various industrial chemicals in a Terahertz (THz) waveguide with a new heptagonal, five layers of heptagonal photonic fiber elliptic form, heptagonal clading shape (H-PCF). COMSOL 4.2 software based on finite element (FEM) methods and perfectly matched layers check our composition (PML). The different chemicals are also differentiated and identified by each other in different parameters H-PCF fibers show a high relative sensitivity of ethanol of approximately 86.50 percent after numerical analysis, Benzene around 89.35%, and water around 85.15% at a frequency of around 0.7 THz. In our experiment, we obtained very low confinement losses at 1 terahertz (THz) such as 5.95×10−08 dB/m for Ethanol 6.67×10−08 dB/m for Benzene, and 5.80×10−08 dB/m for water. Regarding these results, we can strongly recommend that our proposed heptagonal photonic crystal fiber (H-PCF) will be more congenial in biomedical, bio-medicine, and industrial areas for the identification and detection of various types of chemicals with the help of a THz waveguide.


2020 ◽  
Vol 28 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Md. Aminul Islam ◽  
M. Rakibul Islam ◽  
Md. Moinul Islam Khan ◽  
J. A. Chowdhury ◽  
F. Mehjabin ◽  
...  

2020 ◽  
Vol 41 (4) ◽  
pp. 393-401 ◽  
Author(s):  
Fahad Ahmed ◽  
Subrata Roy ◽  
Bikash Kumar Paul ◽  
Kawsar Ahmed ◽  
Ali Newaz Bahar

AbstractAn enormously low loss symmetrical hybrid decagonal porous core spiral photonic crystal fiber (SH-PCF) has been proposed for terahertz (THz) wave guiding. The modal characteristics of the fiber and its mathematical analysis have been numerically completed using a full-vector finite element method (FEM). Simulation results show an ultra-low material loss of 0.0167 cm−1 and large effective area 1.95×106 µm2 which is 91.6 % of bulk absorption material loss at controlling frequency f=1.0 THz with a core porosity 42 %. Additionally, proposed structure establishes the comparatively higher core power fraction maintaining lower scattering loss about 1.8×10−15 dB/cm at the same operating frequency. It promises the aforementioned advantages for efficient THz wave propagation.


Sign in / Sign up

Export Citation Format

Share Document