Effects of aerosols on the solar radiation in mid-hill of Nepal: a case study in the Kathmandu Valley

2016 ◽  
Vol 8 (1) ◽  
pp. 54-62
Author(s):  
M. K. Thapa ◽  
B. K. Bhattarai ◽  
S. Gurung ◽  
B. K. Sapkota ◽  
K. N. Poudyal ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Kathmandu Valley

Impact on solar radiation parameters in India during COVID-19 lockdown: a case study

2021 ◽  
pp. 1-15
Author(s):  
S. M. Revathy ◽  
A. G. Rangaraj ◽  
Y. Srinath ◽  
K. Boopathi ◽  
A. Shobana Devi ◽  
...  
Keyword(s):  
Solar Radiation

scholarly journals Optimal Design Strategy of a Solar Reflector Combining Photovoltaic Panels to Improve Electricity Output: A Case Study in Calgary, Canada

2021 ◽  
Vol 13 (11) ◽  
pp. 6115
Author(s):  
Moon Keun Kim ◽  
Khalid Osman Abdulkadir ◽  
Jiying Liu ◽  
Joon-Ho Choi ◽  
Huiqing Wen
Keyword(s):  
Solar Radiation ◽  
Electricity Generation ◽  
Low Cost ◽  
Design Strategy ◽  
Numerical Approach ◽  
Optimal Shape ◽  
Energy Technology ◽  
Experimental Database ◽  
Pv Panel

This study explores the combination of photovoltaic (PV) panels with a reflector mounted on a building to improve electricity generation. Globally, PV panels have been widely used as a renewable energy technology. In order to obtain more solar irradiance and improve electricity output, this study presents an advanced strategy of a reflector combining PV panels mounted on a building in Calgary, Canada. Based on an experimental database of solar irradiances, the simulation presents an optimal shape designed and tilt angles of the reflector and consequently improves solar radiation gain and electricity outputs. Polished aluminum is selected as the reflector material, and the shape and angle are designed to minimize the interruption of direct solar radiation. The numerical approach demonstrates the improvement in performance using a PV panel tilted at 30°, 45°, 60°, and 75° and a reflector, tilted at 15.5° or allowed to be tilted flexibly. A reflector tilted at 15.5° can improve solar radiation gains, of the panel, by nearly 5.5–9.2% at lower tilt angles and 14.1–21.1% at higher tilt angles. Furthermore, the flexibly adjusted reflector can improve solar radiation gains on the PV panel, by nearly 12–15.6% at lower tilt angles and 20–26.5% at higher tilt angles. A reflector tilted at 15.5° improves the panel’s output electricity on average by 4–8% with the PV panel tilted at 30° and 45° respectively and 12–19 % with the PV panel tilted at 60° and 75°, annually. Moreover, a reflector that can be flexibly tilted improves electricity output on average by 9–12% with the PV panel tilted at 30° and 45° and 17–23% with the PV panel tilted at 60° and 75°. Therefore, the utilization of a reflector improves the performance of the PV panel while incurring a relatively low cost.

scholarly journals Evaluating the Effect of External Horizontal Fixed Shading Devices’ Geometry on Internal Air Temperature, Daylighting and Energy Demand in Hot Dry Climate. Case Study of Ghardaïa, Algeria

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 348
Author(s):  
Sahar Magri Elouadjeri ◽  
Aicha Boussoualim ◽  
Hassan Ait Haddou
Keyword(s):  
Solar Radiation ◽  
Parametric Analysis ◽  
Energy Demand ◽  
Daylighting Simulation ◽  
Simulation Results ◽  
Shading Devices ◽  
Heating Loads ◽  
Shading Device ◽  
The City

The present study investigates the effect of fixed external shading devices’ geometry on thermal comfort, daylighting and energy demand for cooling and heating in the hot and dry climate of the city of Ghardaïa (Algeria). A parametric analysis was performed by using three software: RADIANCE 2.0 and DAYSIM 3.1 for daylighting simulation and TRNSYS.17 for thermal dynamic simulation. Three shading device parameters were assessed: the spacing between slats, the tilted angle and the slats installation. The vertical shading angle “VSA” is fixed; it is equal to the optimum shading angle measured for Ghardaïa. The simulation results indicate that fixed external shading devices have a significant impact on decreasing the energy demand for cooling; however, they are unable to reduce the total energy demand since they significantly increase heating loads. It was found that fixed external shading devices remove all risks associated with glare in summer by decreasing illuminance close to the window; however, they do not improve daylighting performance in winter because of glare. We note that even if the vertical shading angle “VSA” was the same for all cases, these did not present the same thermal and luminous behavior. This is mainly due to the amount and the way that the solar radiation penetrates space.

Sign in / Sign up

Export Citation Format

Share Document