Biogas purification which is the removal of impurities so as to improve the efficiency of gas produced, ensure the safety of end users and prolong the life of the equipment cannot be neglected. This paper is focused on the design and performance evaluation of AD system biogas purification filter. Three different conceptual designs were generated from possible design consideration, feasibility study and preliminary test and with the help of decision matrix; the best conceptual design was selected from which the purification filter was fabricated. The selected concept for detail design was a transparent polyethene cylindrical purification filter fitted with local iron sponge containing activated charcoal and local potash. The reagents were arranged in this order; local potash for the removal of water vapour and carbon dioxide followed by activated charcoal which serves as a purifying agent for hydrogen sulphide. The results obtained showed reduction in percentage composition of hydrogen sulphide (H2S), carbon dioxide, and water vapour. On the other hand, there was an increase in percentage composition of methane (CH4) which is an indication of improvement in methane production after purification. The outcomes of the results obtained were satisfactory and the combination of local potash and activated charcoal was adequate for biogas purification.
Band Emissivities of Carbon Dioxide and Water Vapour