95/01736 The influence of product CO/CO2 ratio on the ignition and temperature history of petroleum coke particles in incipiently gas-fluidized beds

1995 ◽  
Vol 36 (2) ◽  
pp. 118
1994 ◽  
Vol 278 ◽  
pp. 63-81 ◽  
Author(s):  
G. K. Batchelor ◽  
J. M. Nitsche

It is a significant feature of most gas-fluidized beds that they contain rising ‘bubbles’ of almost clear gas. The purpose of this paper is to account plausibly for this remarkable property first by supposing that primary and secondary instabilities of the fluidized bed generate compact regions of above-average or below-average particle concentration, and second by invoking a mechanism for the expulsion of particles from a buoyant compact blob of smaller particle concentration. We postulate that the rising of such an incipient bubble generates a toroidal circulation of the gas in the bubble, roughly like that in a drop of liquid rising through a second liquid of larger density, and that particles in the blob carried round by the fluid move on trajectories which ultimately cross the bubble boundary. Numerical calculations of particle trajectories for practical values of the relevant parameters show that a large percentage of particles, of such small concentration that they move independently, are expelled from a bubble in the time taken by it to rise through a distance of several bubble diameters.Similar calculations for a liquid-fluidized bed show that the expulsion mechanism is much weaker, as a consequence of the larger density and viscosity of a liquid, which is consistent with the absence of observations of relatively empty bubbles in liquid-fluidized beds.It is found to be possible, with the help of the Richardson-Zaki correlation, to adjust the results of these calculations so as to allow approximately for the effect of interaction of particles in a bubble in either a gas- or a liquid-fluidized bed. The interaction of particles at volume fractions of 20 or 30 % lengthens the expulsion times, although without changing the qualitative conclusions.


2006 ◽  
Vol 129 (8) ◽  
pp. 966-976 ◽  
Author(s):  
S. W. Paik ◽  
K. D. Kihm ◽  
S. P. Lee ◽  
D. M. Pratt

The spatially and temporally resolved evaporation phenomena of a slowly evaporating water droplet are investigated using a microfabricated gold heater array consisting of 32 linear heater elements (100 μm wide and 15 mm long, each). Each of the gold microheater elements works both as a temperature sensor and as a heater. The experiment is performed under a constant voltage mode to examine the spatially resolved temperature history of the droplet contact surface for a period starting at initial contact with the heater and lasting to the point of complete dryout. The raw data obtained from the linear array have been tomographically deconvolved so that the radial temperature profile can be determined assuming a circular droplet contact surface.


Sign in / Sign up

Export Citation Format

Share Document