Solid polymer electrolytes based on polyethylene oxide-silver thiocyanate

1995 ◽  
Vol 80 (1-2) ◽  
pp. 37-44 ◽  
Author(s):  
S Sekhon
2022 ◽  
Vol 1048 ◽  
pp. 101-109
Author(s):  
Suresh Sripada ◽  
M. Chandrashekhar Reddy ◽  
T. Sreekanth ◽  
Rajesh Siripuram ◽  
K. Venkateshwarlu

Solid polymer electrolyte films made with potassium doped Polyethylene oxide using ZrO2 as nanofiller (70PEO-30KBF4-x ZrO2 where x = 1, 2.5, 5, 7.5, & 10 wt% ­­) were prepared by solution casting technique. Optical and thermal properties of polymer electrolyte films were studied by using Optical absorption and DSC techniques. From Optical absorption spectra, it is observed that fundamental absorption edge is shifted towards the higher wavelength side (range 259- 297 nm) with increase of nano filler (ZrO­2) concentration (1-10 wt %). Optical band gap for all electronic transitions (p=1/2, 2, 2/3 and 1/3) are found to be increased as incorporation of nano filler (ZrO2) which confirms the structural rearrangements takes place in polymer electrolyte films. Optical band gap for indirect allowed transitions (p=1/2) are found to be in the range of 1.93-3.34eV. Decrease in Urbach energy (4.8eV- 1.4eV) is associated with decrease in defect formation in host polymeric matrix (PEO-KBF4) as a result of embedded nano filler (ZrO2). DSC spectra analysis of polymer electrolytes has showed melting temperatures in the range 63.63-73.71°C and highest crystallinity is found to be 85 % (10 wt % ZrO­2). Enthalpy values are elevated with increase in nanofiller composition (ZrO2) in the present polymer electrolyte films.Keywords: PEO based polymer electrolytes, Solid polymer electrolytes, Optical and Thermal studies.


2015 ◽  
Vol 55 (7) ◽  
pp. 1536-1545 ◽  
Author(s):  
Patchaiyappan Sivaraman ◽  
Kannakaje Shashidhara ◽  
Avinash P. Thakur ◽  
Asit B. Samui ◽  
Arup R. Bhattacharyya

Author(s):  
Prasanth Raghavan ◽  
P. P. Abhijith ◽  
N. S. Jishnu ◽  
Akhila Das ◽  
Neethu T. M. Balakrishnan ◽  
...  

2014 ◽  
Vol 17 (3) ◽  
pp. 139-145 ◽  
Author(s):  
C. Vijil Vani ◽  
S. Thanikaikarasan ◽  
T. Mahalingam ◽  
P. J. Sebastian ◽  
L. E. Verea ◽  
...  

Solid polymer electrolytes of polyethylene oxide (PEO) embedded with LiCF3SO3 was prepared and subjected to X-ray irradiation of different dosages (1.5 to 6 Gy). Ionic conductivity and dielectric studies were made over a frequency range of 100 Hz to 490 KHz. A little increase in ionic conductivity was noted for the sample irradiated for 1.5 Gy and the equivalent circuit remained unaltered for irradiated samples. Remarkable increase in dielectric constant was found for the irradiated samples. It was found that irradiation improved the dissolution of lithium salt and increased the polymer/Lithium interaction and thus improved the polarizability of the electrolyte. The frequency of hopping and liberation of free lithium ions were found altered by irradiation and hence the given dosage was found to have an optimum value in concern with the ionic conductivity of the electrolyte.


Sign in / Sign up

Export Citation Format

Share Document