Wind disturbance in forests: The process of wind created gaps, tree overturning, and stem breakage

2021 ◽  
pp. 117-184
Author(s):  
Christopher P. Quine ◽  
Barry A. Gardiner ◽  
John Moore
2013 ◽  
Vol 133 (3) ◽  
pp. 262-271
Author(s):  
Kentaro Sato ◽  
Kiyoshi Ohishi ◽  
Toshimasa Miyazaki

2020 ◽  
Vol 140 (4) ◽  
pp. 92-96
Author(s):  
Yuto Goda ◽  
Hiroto Shobu ◽  
Kenji Sakai ◽  
Toshihiko Kiwa ◽  
Kenji Kondo ◽  
...  

Forests ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 28
Author(s):  
Linda Čakša ◽  
Silva Šēnhofa ◽  
Guntars Šņepsts ◽  
Didzis Elferts ◽  
Līga Liepa ◽  
...  

Post-disturbance salvage logging mitigates economic loss after windthrow, and the value of salvaged timber is strongly linked to its quality and dimensions. We studied the occurrence of wind-induced damage of aspen in the hemiboreal forests of Latvia based on data from the National Forest Inventory and additional measurements. Individual tree data from three re-measurement periods were linked to follow a tree condition (live, broken, uprooted) and to link tree characteristics to a respective snag. Three linear models were developed to assess factors affecting the snapping height. An assortment outcome was calculated for undamaged and salvaged trees using the bucking algorithm, and timber value was calculated at three price levels. Wind-induced damage occurred for 3.4–3.6% of aspen trees, and among these, 45.8–46.6% were broken. The mean height of the broken trees was 27.3 ± 0.9 m, and it was significantly higher (both p < 0.01) compared to the height of undamaged and uprooted trees. The tested models indicated tree height as the main explanatory variable for relative snapping height, with higher trees having a lower point of the stem breakage. The other significant factor was the forest type group, indicating that trees growing on dry mineral soils had lower relative snapping height than trees growing on drained mineral soils. Stem breakage significantly (p < 0.001) reduced the volume of assortments, as compared to the volume of undamaged trees. Relative volume loss of sawlogs showed a logarithmic trend with a steep increase up to snapping height of 6 m, and it correlated tightly (r = 0.83, p < 0.001) with relative value loss of the total stem. Timber value loss had a strong, positive relation to tree diameter at breast height and fluctuated by 0.4% among different price levels. The mean volume reduction was 37.7% for sawlogs, 11.0% for pallet blocks, and 8.9% for technological wood.


2018 ◽  
Vol 98 ◽  
pp. 157-172 ◽  
Author(s):  
Auwalu M. Abdullahi ◽  
Z. Mohamed ◽  
H. Selamat ◽  
Hemanshu R. Pota ◽  
M.S. Zainal Abidin ◽  
...  

2021 ◽  
Author(s):  
Duo Wang ◽  
Lei Ma ◽  
Yu-Hao Song ◽  
Binbin Li

PLoS ONE ◽  
2021 ◽  
Vol 16 (11) ◽  
pp. e0257849
Author(s):  
Muhammad Wasim ◽  
Ahsan Ali ◽  
Mohammad Ahmad Choudhry ◽  
Faisal Saleem ◽  
Inam Ul Hasan Shaikh ◽  
...  

An airship is lighter than an air vehicle with enormous potential in applications such as communication, aerial inspection, border surveillance, and precision agriculture. An airship model is made up of dynamic, aerodynamic, aerostatic, and propulsive forces. However, the computation of aerodynamic forces remained a challenge. In addition to aerodynamic model deficiencies, airship mass matrix suffers from parameter variations. Moreover, due to the lighter-than-air nature, it is also susceptible to wind disturbances. These modeling issues are the key challenges in developing an efficient autonomous flight controller for an airship. This article proposes a unified estimation method for airship states, model uncertainties, and wind disturbance estimation using Unscented Kalman Filter (UKF). The proposed method is based on a lumped model uncertainty vector that unifies model uncertainties and wind disturbances in a single vector. The airship model is extended by incorporating six auxiliary state variables into the lumped model uncertainty vector. The performance of the proposed methodology is evaluated using a nonlinear simulation model of a custom-developed UETT airship and is validated by conducting a kind of error analysis. For comparative studies, EKF estimator is also developed. The results show the performance superiority of the proposed estimator over EKF; however, the proposed estimator is a bit expensive on computational grounds. However, as per the requirements of the current application, the proposed estimator can be a preferred choice.


2020 ◽  
Vol 102 (3) ◽  
pp. 202-206
Author(s):  
Haruto Nomiya ◽  
Hiromi Yamagawa ◽  
Hidetoshi Shigenaga ◽  
Satoshi Ito ◽  
Ryoko Hirata ◽  
...  

2013 ◽  
Vol 21 (6) ◽  
pp. 1568-1575
Author(s):  
孙明玮 SUN Ming-wei ◽  
邱德敏 QIU De-min ◽  
王永坤 WANG Yong-kun ◽  
陈增强 CHEN Zeng-qiang

Sign in / Sign up

Export Citation Format

Share Document