Rapid heating induced vibration of circular cylindrical shells with magnetostrictive functionally graded material

2014 ◽  
Vol 14 (4) ◽  
pp. 710-720 ◽  
Author(s):  
C.C. Hong
2016 ◽  
Vol 32 (4) ◽  
pp. 473-478
Author(s):  
C.-C. Hong

AbstractThe generalized differential quadrature (GDQ) method is used to investigate the transient response of magnetostrictive functionally graded material (FGM) circular cylindrical shells. The effects of control gain value, thermal load temperature and power-law index on transient responses of dominant normal displacement and thermal stress are analyzed. With velocity feedback and suitable product values of coil constant by control gain in the magnetostrictive FGM shells can reduce the transient amplitude of displacement into a smaller value.


2012 ◽  
Vol 376 (45) ◽  
pp. 3351-3358 ◽  
Author(s):  
Huijie Shen ◽  
Jihong Wen ◽  
Michael P. Païdoussis ◽  
Dianlong Yu ◽  
Meisam Asgari ◽  
...  

2018 ◽  
Vol 18 (11) ◽  
pp. 1850138 ◽  
Author(s):  
Yueyang Han ◽  
Xiang Zhu ◽  
Tianyun Li ◽  
Yunyan Yu ◽  
Xiaofang Hu

An analytical approach for predicting the free vibration and elastic critical load of functionally graded material (FGM) thin cylindrical shells filled with internal pressured fluid is presented in this study. The vibration of the FGM cylindrical shell is described by the Flügge shell theory, where the internal static pressure is considered as the prestress term in the shell equations. The motion of the internal fluid is described by the acoustic wave equation. The natural frequencies of the FGM cylindrical shell under different internal pressures are obtained with the wave propagation method. The relationship between the internal pressure and the natural frequency of the cylindrical shell is analyzed. Then the linear extrapolation method is employed to obtain the elastic critical load of the FGM cylindrical shell from the condition that the increasing pressure has resulted in zero natural frequency. The accuracy of the present method is verified by comparison with the published results. The effects of gradient index, boundary conditions and structural parameters on the elastic critical load of the FGM cylindrical shell are discussed. Compared with the experimental and numerical analyses based on the external pressure, the present method is simple and easy to carry out.


2017 ◽  
Vol 21 (3) ◽  
pp. 938-972 ◽  
Author(s):  
Dao Van Dung ◽  
Nguyen Thi Nga ◽  
Pham Minh Vuong

This paper investigates analytically nonlinear buckling and postbuckling of functionally graded sandwich circular thick cylindrical shells filled inside by Pasternak two-parameter elastic foundations under thermal loads and axial compression loads. Shells are reinforced by closely spaced functionally graded material (FGM) rings and stringers. The temperature field is taken into account. Two general Sigmoid law and general power law, with four models of stiffened FGM sandwich cylindrical shell, are proposed. Using the Reddy’s third-order shear deformation shell theory (TSDT), stress function, and Lekhnitsky’s smeared stiffeners technique, the governing equations are derived. The closed form to determine critical axial load and postbuckling load-deflection curves are obtained by the Galerkin method. The effects of the face sheet thickness to total thickness ratio, stiffener, foundation, material, and dimensional parameters on critical thermal loads, critical mechanical loads and postbuckling behavior of shells are analyzed. In addition, this paper shows that for thin shells we can use the classical shell theory to investigate stability behavior of shell, but for thicker shells the use of TSDT for analyzing nonlinear stability of shell is necessary and suitable.


2020 ◽  
pp. 107754632095166
Author(s):  
Chih-Chiang Hong

The effects of third-order shear deformation theory and varied shear correction coefficient on the vibration frequency of thick functionally graded material cylindrical shells with fully homogeneous equation under thermal environment are investigated. The nonlinear coefficient term of displacement field of third-order shear deformation theory is included to derive the fully homogeneous equation under free vibration of functionally graded material cylindrical shells. The determinant of the coefficient matrix in dynamic equilibrium differential equations under free vibration can be represented into the fully fifth-order polynomial equation, thus the natural frequency can be found. Two parametric effects of environment temperature and functionally graded material power law index on the natural frequency of functionally graded material thick cylindrical shells with and without the nonlinear coefficient term of displacement fields are computed and investigated.


Sign in / Sign up

Export Citation Format

Share Document