Construction of α-Fe2O3/CeO2 decorated g-C3N4 nanosheets for magnetically separable efficient photocatalytic performance under visible light exposure and bacterial disinfection

2019 ◽  
Vol 488 ◽  
pp. 763-777 ◽  
Author(s):  
Shanmugam Vignesh ◽  
Sanjeevamuthu Suganthi ◽  
Jeyaperumal Kalyana Sundar ◽  
Vairamuthu Raj
2019 ◽  
Vol 8 (1) ◽  
pp. 56-61
Author(s):  
Aneeya K. Samantara ◽  
Debasrita Dash ◽  
Dipti L. Bhuyan ◽  
Namita Dalai ◽  
Bijayalaxmi Jena

: In this article, we explored the possibility of controlling the reactivity of ZnO nanostructures by modifying its surface with gold nanoparticles (Au NPs). By varying the concentration of Au with different wt% (x = 0.01, 0.05, 0.08, 1 and 2), we have synthesized a series of (ZnO/Aux) nanocomposites (NCs). A thorough investigation of the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface has been carried out. It was observed that ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity among all concentrations of Au on the ZnO surface, which degrades the dye concentration within 2 minutes of visible light exposure. It was further revealed that with an increase in the size of plasmonic nanoparticles beyond 0.08%, the accessible surface area of the Au nanoparticle decreases. The photon absorption capacity of Au nanoparticle decreases beyond 0.08% resulting in a decrease in electron transfer rate from Au to ZnO and a decrease of photocatalytic activity. Background: Due to the industrialization process, most of the toxic materials go into the water bodies, affecting the water and our ecological system. The conventional techniques to remove dyes are expensive and inefficient. Recently, heterogeneous semiconductor materials like TiO2 and ZnO have been regarded as potential candidates for the removal of dye from the water system. Objective: To investigate the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface and the effect of the size of Au NPs for photocatalytic performance in the degradation process. Methods: A facile microwave method has been adopted for the synthesis of ZnO nanostructure followed by a reduction of gold salt in the presence of ZnO nanostructure to form the composite. Results: ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity which degrades the dye concentration within 2 minutes of visible light exposure. The schematic mechanism of electron transfer rate was discussed. Conclusion: Raspberry shaped ZnO nanoparticles modified with different percentages of Au NPs showed good photocatalytic behavior in the degradation of dye molecules. The synergetic effect of unique morphology of ZnO and well anchored Au nanostructures plays a crucial role.


2018 ◽  
Vol 42 (11) ◽  
pp. 8914-8923 ◽  
Author(s):  
Baihong An ◽  
Yanan Liu ◽  
Chengcheng Xu ◽  
Han Wang ◽  
Jun Wan

Visible light responsive Fe3O4–WSe2/NG (nitrogen doped graphene oxide) heterojunction nanocomposites were synthesized by a hydrothermal synthesis route, in which Fe3O4 and WSe2 particles were coated on the surface of NG.


RSC Advances ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 4284-4294 ◽  
Author(s):  
Yongmei Xia ◽  
Zuming He ◽  
Jiangbin Su ◽  
Bin Tang ◽  
Kejun Hu ◽  
...  

SEM image of as-synthesized NiFe2O4/BiOI (NFO/BOI) nanocomposites (a) and schematic illustration of excitation and separation of photo-induced electron–hole pairs for NFO/BOI nanocomposites (b).


2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Neradabilli Prabhakarrao ◽  
Tirukkovalluri Siva Rao ◽  
Kapuganti Venkata Divya Lakshmi ◽  
Gorli Divya ◽  
Genji Jaishree ◽  
...  

AbstractThe present study discusses the synthesis of Nb doped TiO2/reduced graphene oxide (rGO) intercalated nanocomposites via sol-gel route at a lower temperature by using different loading amounts of graphene oxide (GO) (1 to 10 wt%). The synthesized composite materials were further characterized by copious instruments such as X-ray Diffractometer, UV-Vis Diffuse Reflectance Spectroscopy, Scanning Electron Microscopy, Transmission Electron Microscopy, Brunauer-Emmett-Teller surface area analysis, Raman and Fourier Transform-Infrared Spectroscopy. The experimental results stated that the Nb doped TiO2 nanoparticles uniformly distributed on the surface of rGO with an interfacial linking bond between TiO2 and rGO. Later, the photocatalytic degradation of Rhodamine B (RhB) dye using produced materials under visible light irradiation was examined. These results revealed that Nb doped TiO2/rGO nanocomposites exhibited better photocatalytic performance than Nb doped TiO2 for the removal of RhB dye. However, among all, the nanocomposite having 5 wt% of GO content achieves the highest degradation efficiency for RhB dye approximately 98% under visible light exposure. Altogether, the unique properties such as electron accepting and transporting properties of GO in the nanocomposite is caused to enhance photocatalytic activity by minimizing the charge carrier’s recombination rate.


2018 ◽  
Vol 20 (1) ◽  
pp. 414-421 ◽  
Author(s):  
Jie Ni ◽  
Jinjuan Xue ◽  
LinFang Xie ◽  
Jing Shen ◽  
Guangyu He ◽  
...  

The characterization and photocatalytic properties of magnetic NiAl LDH/Fe3O4–RGO composites were investigated.


Sign in / Sign up

Export Citation Format

Share Document