Dielectric abnormality and high-permittivity microwave dielectric properties of SrO-TiO2-CeO2 solid solution

2019 ◽  
Vol 45 (3) ◽  
pp. 3634-3642 ◽  
Author(s):  
Burhan Ullah ◽  
Ahmad Sayyadi-Shahraki ◽  
Amir Ullah ◽  
Rajwali Khan
Keyword(s):  
Solid Solution ◽  
Dielectric Properties ◽  
Microwave Dielectric Properties ◽  
High Permittivity ◽  
Microwave Dielectric

Structure and microwave dielectric properties of Ba3Nb4-4Ti4+5O21 ceramics with medium-high permittivity

2020 ◽  
Vol 820 ◽  
pp. 153159 ◽  
Author(s):  
Junqi Chen ◽  
Ying Tang ◽  
Jie Li ◽  
Huaicheng Xiang ◽  
Chunchun Li ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
Microwave Dielectric Properties ◽  
High Permittivity ◽  
Microwave Dielectric

Structure and Microwave Dielectric Properties of (Ca0.9375Sr0.0625)0.25 (Li0.5Sm0.5)0.75TiO3 Ceramics with B2O3-CuO Sintering Aids

2011 ◽  
Vol 284-286 ◽  
pp. 1442-1446
Author(s):  
Yue Ming Li ◽  
Zong Yang Shen ◽  
Zhu Mei Wang ◽  
Hua Zhang ◽  
Yan Hong ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Dielectric Properties ◽  
Sintering Temperature ◽  
Microwave Dielectric Properties ◽  
Microwave Dielectric Ceramics ◽  
Sintering Aids ◽  
Oxide Mixture ◽  
High Permittivity ◽  
Microwave Dielectric ◽  
Dielectric Ceramics

The B2O3-CuO oxide mixture (abbreviated as BC) was selected to lower the sintering temperature of (Ca0.9375Sr0.0625)0.25(Li0.5Sm0.5)0.75TiO3 (abbreviated as CSLST) microwave dielectric ceramics by solid sate reaction technique. The effects of BC doping amounts on the crystal structure, microstructure and microwave dielectric properties of the ceramics were investigated. For the ceramic sample with the composition of CSLST + 5 wt% BC, its sintering temperature was reduced to 1000 °C as compared to 1200 °C for pure CSLST. In addition to the obtained good microwave dielectric properties as follows: εr = 80.4, Q×f = 1380 GHz, τf = -32.89 ×10-6/°C, this ceramic was a desirable high-permittivity microwave dielectric candidate for low-temperature cofired ceramic (LTCC) applications.

Structures and microwave dielectric properties of Ba6−3x(Nd,Biy)8+2xTi18O54 (x = 2/3) solid solution

2001 ◽  
Vol 16 (6) ◽  
pp. 1734-1738 ◽  
Author(s):  
Yong Jun Wu ◽  
Xiang Ming Chen
Keyword(s):  
Solid Solution ◽  
Dielectric Properties ◽  
Resonant Frequency ◽  
Temperature Coefficient ◽  
Solid Solubility ◽  
Microwave Dielectric Properties ◽  
Solubility Limit ◽  
Solid Solubility Limit ◽  
Continuous Increase ◽  
Microwave Dielectric

The effects of Bi substitution for Nd in Ba6−3xNd8+2xTi18O54 (x = 2/3) solid solution upon the microstructures and microwave dielectric properties were investigated. The solid solubility limit of Bi in Ba6−3xNd8+2xTi18O54 (x = 2/3) solid solution was about 15 mol%, the same as that for x = 0.5, and densification of the present solid solutions could be performed well at lower temperatures. However, the variation tendency of microwave dielectric properties with composition in the present ceramics quite differed from that for x = 0.5: (1) The temperature coefficient of resonant frequency in the present ceramics showed a continuous variation from positive to negative and did not indicate extreme value at the solid solubility limit. (2) Near-zero temperature coefficient of resonant frequency combined with high-ε and high-Qf values could be obtained in the present ceramics, while that for x = 0.5 had a lower limit of +15 ppm/°C. (3) The dielectric constant also showed a continuous increase for the present compositions, while that in x = 0.5 had an extreme at solid solubility limit. Ceramics with composition of Ba6−3x(Nd0.85,Bi0.15)8+2xTi18O54 (x = 2/3) showed excellent dielectric properties of ε = 99.1, Qf = 5290 GHz, and τf = −5.5 ppm/°C.

Sign in / Sign up

Export Citation Format

Share Document