Optimal Control-limit Maintenance Policy for a Production System with Multiple Process States

2021 ◽  
pp. 107454
Author(s):  
Shuyuan Gan ◽  
Nooshin Yousefi ◽  
David W. Coit
Author(s):  
Yifan Zhou ◽  
Chao Yuan ◽  
Tian Ran Lin ◽  
Lin Ma

Existing research about the maintenance optimisation of production systems with intermediate buffers largely assumed a series system structure. However, practical production systems often contain subsystems of ring structures, for example, rework and feedforward. The maintenance optimisation of these complex systems is difficult due to the complicated structure of maintenance policies and the large search space for optimisation. This paper proves the control limit property of the optimal condition-based maintenance policy. Based on the control limit property, approximate policy structures that incur a smaller policy space are proposed. Because the state space of a production system is often large, the objective function of the maintenance optimisation cannot be evaluated analytically. Consequently, a stochastic branch and bound (SB&B) algorithm embedding a sequential simulation procedure is proposed to determine a cost-efficient condition-based maintenance policy. Numerical studies show that the proposed maintenance policy structures can deliver a cost-efficient maintenance policy, and the performance of the SB&B algorithm is enhanced by the inclusion of a sequential simulation procedure.


2001 ◽  
Vol 46 (3) ◽  
pp. 416-427 ◽  
Author(s):  
Qing Zhang ◽  
G.G. Yin ◽  
E.-K. Boukas

2019 ◽  
Vol 25 (2) ◽  
pp. 236-252 ◽  
Author(s):  
Lin Wang ◽  
Zhiqiang Lu ◽  
Xiaole Han

Purpose This paper integrates condition-based maintenance (CBM) with production planning in a single-stage production system that deteriorates with usage during a specified finite planning horizon. The purpose of this paper is to develop an integrated production and maintenance model to minimize the expected total cost over the horizon. Design/methodology/approach A joint production planning and CBM model is proposed. In the model, a set of products must be produced in lots. The system degradation is a stationary gamma process and the degradation level is detected by inspection between production lots. Maintenance actions including imperfect preventive maintenance (PM) should be taken when the failure risk exceeds the maintenance threshold. A fix-iterative heuristic algorithm is proposed to address the joint model. Findings The proactive policy expressed as a prognosis maintenance threshold is introduced to integrate CBM with batch production perfectly. Experiments are carried out to conduct sensitivity analysis, which provides some insights to facilitate industrial manufacturing. The superiority of the proposed joint model compared with a separate decision method is demonstrated. The results show an advantage in cost saving. Originality/value Few studies have been made to integrate production planning and CBM decisions, especially for a multi-product system. Their maintenance decisions are usually based on a periodic review policy, which is not appropriate for batch production system. A prognosis maintenance threshold based on system condition and production quantity is suitable for the integrated decisions. Moreover, the imperfect PM is taken into consideration in this paper. A fix-iterative algorithm is developed to solve the joint model. This work forms a proactive maintenance for batch production.


1984 ◽  
Vol 21 (3) ◽  
pp. 602-615 ◽  
Author(s):  
Werner E. Helm ◽  
Karl-Heinz Waldmann

We study the problem of optimal customer admission to multiserver queues. These queues are assumed to live in an extraneous environment which changes in a semi-Markovian way. Arrivals, service mechanism and random reward/cost structure may all depend on these surroundings. Included as special cases are SM/M/c queues, in particular G/M/c queues, in a random environment. By a direct inductive approach we establish optimality of a generalized control-limit rule depending on the actual environment. Particular emphasis is laid on different applications that show the versatility of the proposed setup.


2019 ◽  
Vol 52 (1) ◽  
pp. 1012-1017
Author(s):  
Gustavo A. de Andrade ◽  
José G. García-Clúa ◽  
Paulo R.C. Mendes ◽  
Julio E. Normey-Rico

Sign in / Sign up

Export Citation Format

Share Document