Liquid fuel evaporation was investigated in a premix duct, operating at conditions expected for lean premixed and prevaporized combustion. Results from a flat prefilming airblast atomizer are presented. Kerosine Jet A was used in all experiments. Air pressure, air temperature and liquid fuel flow rate were varied separately, their relative influences on atomization, evaporation and fuel dispersion are discussed.
The results show, that at pressures up to 15 bars and temperatures up to 850 K, nearly complete evaporation of the fuel was achieved, without autoignition of the fuel. For the configuration tested, the fuel distributions of the liquid and evaporated fuel sbow very little differences in their dispersion characteristics and were not much affected by a variation of the operating conditions.