Refinery production planning optimization under crude oil quality uncertainty

Author(s):  
Fupei Li ◽  
Feng Qian ◽  
Wenli Du ◽  
Minglei Yang ◽  
Jian Long ◽  
...  
2020 ◽  
Vol 59 (18) ◽  
pp. 8704-8714
Author(s):  
Fupei Li ◽  
Feng Qian ◽  
Chen Fan ◽  
Vladimir Mahalec

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1257
Author(s):  
Xiaoyong Gao ◽  
Yue Zhao ◽  
Yuhong Wang ◽  
Xin Zuo ◽  
Tao Chen

In this paper, a new Lagrange relaxation based decomposition algorithm for the integrated offshore oil production planning optimization is presented. In our previous study (Gao et al. Computers and Chemical Engineering, 2020, 133, 106674), a multiperiod mixed-integer nonlinear programming (MINLP) model considering both well operation and flow assurance simultaneously had been proposed. However, due to the large-scale nature of the problem, i.e., too many oil wells and long planning time cycle, the optimization problem makes it difficult to get a satisfactory solution in a reasonable time. As an effective method, Lagrange relaxation based decomposition algorithms can provide more compact bounds and thus result in a smaller duality gap. Specifically, Lagrange multiplier is introduced to relax coupling constraints of multi-batch units and thus some moderate scale sub-problems result. Moreover, dual problem is constructed for iteration. As a result, the original integrated large-scale model is decomposed into several single-batch subproblems and solved simultaneously by commercial solvers. Computational results show that the proposed method can reduce the solving time up to 43% or even more. Meanwhile, the planning results are close to those obtained by the original model. Moreover, the larger the problem size, the better the proposed LR algorithm is than the original model.


2012 ◽  
Vol 51 (39) ◽  
pp. 12852-12861 ◽  
Author(s):  
Abdulrahman M. Alattas ◽  
Ignacio E. Grossmann ◽  
Ignasi Palou-Rivera

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Gargi Goswami ◽  
Bidhu Bhusan Makut ◽  
Debasish Das

Abstract The study demonstrates a sustainable process for production of bio-crude oil via hydrothermal liquefaction of microbial biomass generated through co-cultivation of microalgae and bacteria coupled with wastewater remediation. Biomass concentration and wastewater treatment efficiency of a tertiary consortium (two microalgae and two bacteria) was evaluated on four different wastewater samples. Total biomass concentration, total nitrogen and COD removal efficiency was found to be 3.17 g L−1, 99.95% and 95.16% respectively when consortium was grown using paper industry wastewater in a photobioreactor under batch mode. Biomass concentration was enhanced to 4.1 g L−1 through intermittent feeding of nitrogen source and phosphate. GC-MS and FTIR analysis of bio-crude oil indicates abundance of the hydrocarbon fraction and in turn, better oil quality. Maximum distillate fraction of 30.62% lies within the boiling point range of 200–300 °C depicting suitability of the bio-crude oil for conversion into diesel oil, jet fuel and fuel for stoves.


2013 ◽  
Vol 655-657 ◽  
pp. 1646-1649 ◽  
Author(s):  
Chi Zhang ◽  
Zhen He ◽  
Yuan Peng Ruan

Scheduling is an effective optimization methodology which has been widely used for production planning. This paper presents a scheduling model to optimize the output of an assembly line in F Semiconductor Company in Tianjin, China. The authors formulate the optimization problem as linear programming. The model and its implementation are described in detail in this article. The optimum production allocations have been founded by the scheduling model and the output has been increased.


Sign in / Sign up

Export Citation Format

Share Document