A finite beam element for analyzing shear lag and shear deformation effects in composite-laminated box girders

2004 ◽  
Vol 82 (9-10) ◽  
pp. 763-771 ◽  
Author(s):  
Yaping Wu ◽  
Yuanming Lai ◽  
Xuefu Zhang ◽  
Yuanlin Zhu
2021 ◽  
Vol 233 ◽  
pp. 111867
Author(s):  
Xiayuan Li ◽  
Shui Wan ◽  
Yuanhai Zhang ◽  
Maoding Zhou ◽  
Yilung Mo

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chi Ma ◽  
Shi-zhong Liu ◽  
Jin Di ◽  
Rui-jie Zhang

Steel bottom plates are applied as replacements for the concrete bottom plates in order to reduce the dead weight of the composite box girders with corrugated steel webs and steel bottom plates (CSWSB). Due to the change in the material, the previous analytical calculation methods of vertical deflection of composite box girders with corrugated steel webs (CSWs) cannot be directly applied to the improved composite box girders. The shear lag warpage displacement function was derived based on the shear deformation laws of the upper flange and the bottom plates of the improved composite box girders. The equations for the calculation of the shear deformation and the additional deflection due to the shear lag of continuous and simply supported composite box girders with CSWSB under concentrated and uniformly distribution loads were derived by considering the double effects of the shear lag and the shear deformations of the top and the bottom plates with different elastic moduli. The analytical solutions of the vertical deflection of the improved composite box girders include the theory of the bending deflection of elementary beams, shear deformation of CSWs, and the additional deflection caused by the shear lag. Based on the theoretical derivation, an analytical solution method was established and the obtained vertical deflection analytical solutions were compared with the finite element method (FEM) calculation results and the experimental values. The analytical equations of vertical deflection under the two supporting conditions and the two load cases have verified the analyses and the comparisons. Further, the additional deflections due to the shear lag and the shear deformation are found to be less than 2% and 34% of the total deflection values, respectively. Moreover, under uniform distributed load conditions, the deflection value was found to be higher than that of the under concentrated load condition. It was also found that the ratio of the deflection caused by the shear lag or the shear deformation to the total deflection decreased gradually with the increase in the span width ratio. When the value of the span width ratio of a single box and single chamber composite box girder with CSWSB was equal to or greater than 8, the deflections caused by the shear lag and the shear deformation could be ignored.


2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Wei Ji ◽  
Kui Luo ◽  
Jingwei Zhang

Prestressed concrete (PC) girders with corrugated steel webs (CSWs) have received considerable attention in the past two decades due to their light self-weight and high prestressing efficiency. Most previous studies were focused on the static behavior of CSWs and simple beams with CSWs. The calculation of deflection is an important part in the static analysis of structures. However, very few studies have been conducted to investigate the deflection of full PC girders or bridges with CSWs and no simple formulas are available for estimating their deflection under static loads. In addition, experimental work on full-scale bridges or scale bridge models with CSWs is very limited. In this paper, a formula for calculating the deflection of PC box girders with CSWs is derived. The longitudinal displacement function of PC box girders with CSWs, which can consider the shear lag effect and shear deformation of CSWs, is first derived. Based on the longitudinal displacement function, the formula for predicting the deflection of PC box girders with CSWs is derived using the variational principle method. The accuracy of the derived formula is verified against experimental results from a scaled bridge model and the finite element analysis results. Parametric studies are also performed, and the influences of shear lag and shear deformation on the deflection of the box girder with CSWs are investigated by considering different width-to-span ratios and different girder heights. The present study provides an effective and efficient tool for determining the deflection of PC box girders with CSWs.


2012 ◽  
Vol 19 (9) ◽  
pp. 2650-2655 ◽  
Author(s):  
Wang-bao Zhou ◽  
Li-zhong Jiang ◽  
Zhi-jie Liu ◽  
Xiao-jie Liu

Author(s):  
Mohamed-Ouejdi Belarbi ◽  
Abdelhak Khechai ◽  
Aicha Bessaim ◽  
Mohammed-Sid-Ahmed Houari ◽  
Aman Garg ◽  
...  

In this paper, the bending behavior of functionally graded single-layered, symmetric and non-symmetric sandwich beams is investigated according to a new higher order shear deformation theory. Based on this theory, a novel parabolic shear deformation function is developed and applied to investigate the bending response of sandwich beams with homogeneous hardcore and softcore. The present theory provides an accurate parabolic distribution of transverse shear stress across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the functionally graded sandwich beam without using any shear correction factors. The governing equations derived herein are solved by employing the finite element method using a two-node beam element, developed for this purpose. The material properties of functionally graded sandwich beams are graded through the thickness according to the power-law distribution. The predictive capability of the proposed finite element model is demonstrated through illustrative examples. Four types of beam support, i.e. simply-simply, clamped-free, clamped–clamped, and clamped-simply, are used to study how the beam deflection and both axial and transverse shear stresses are affected by the variation of volume fraction index and beam length-to-height ratio. Results of the numerical analysis have been reported and compared with those available in the open literature to evaluate the accuracy and robustness of the proposed finite element model. The comparisons with other higher order shear deformation theories verify that the proposed beam element is accurate, presents fast rate of convergence to the reference results and it is also valid for both thin and thick functionally graded sandwich beams. Further, some new results are reported in the current study, which will serve as a benchmark for future research.


1971 ◽  
Vol 97 (4) ◽  
pp. 1366-1370
Author(s):  
Natarajan Krishnamurthy
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document