Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0M NaCl

2011 ◽  
Vol 53 (6) ◽  
pp. 2191-2200 ◽  
Author(s):  
Hua Tan ◽  
Zhiyu Wang ◽  
Yiming Jiang ◽  
Dong Han ◽  
Jufeng Hong ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Temperature Effect ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Welded Joints ◽  
Annealing Temperature ◽  
Plasma Arc ◽  
Pitting Corrosion Resistance

scholarly journals Pitting Corrosion Resistance on Annealing Treated Super Duplex Stainless Steel S32750

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 294
Author(s):  
Shuang Liu ◽  
Chaohua Yue ◽  
Xi Chen ◽  
Qiuhua Zhu ◽  
Yiyou Tu
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Annealing Temperature ◽  
Super Duplex Stainless Steel ◽  
Boundary Area ◽  
Pitting Potential ◽  
Pitting Corrosion Resistance ◽  
Equivalent Number

The pitting corrosion resistance of S32750 super duplex stainless steel, annealing treated at temperatures of 950–1200 °C for 20–60 min, was investigated using potentiodynamic polarization tests. The results show that the volume fractions of ferrite in the S32750 duplex stainless steel increased from 48.9% to 68.4% as annealing temperatures increased from 950 to 1200 °C. The pitting potential of the sample increased first and then decreased from an annealing temperature of 950 to 1050 °C, and the highest pitting potential was observed after annealing at 1050 °C for 35 min. The pitting corrosion resistance of S32750 stainless steel is due to the combination of pitting resistance equivalent number (PREN) value, phase fraction and grain boundary area fraction, and the imbalance of corrosion potential.

Microstructure and Corrosion Resistance of Dissimilar Welded Joints between Duplex Stainless Steel and Austenitic Stainless Steel

2012 ◽  
Vol 570 ◽  
pp. 43-51
Author(s):  
Shao Gang Wang ◽  
Yan Li ◽  
Wei Guo Zhai
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Welded Joints ◽  
Microstructural Characterization ◽  
Optical Microscope ◽  
Dissimilar Metals ◽  
Pitting Corrosion Resistance

The dissimilar metals components of duplex stainless steels are more and more used in engineering fields recently. But the welding of dissimilar metals is more a challenge than that of similar metals. The joints of dissimilar metals between 2205 duplex stainless steel and 304 austenitic stainless steel were produced by tungsten inert gas arc welding (GTAW) with welding wire ER2209 and ER309, respectively. The microstructural characterization of welded joints is systematically analyzed by using optical microscope and X-ray diffractometer. The pitting corrosion resistance of the joints is evaluated by electrochemical test. Results show that the microstructure of joint consists of austenite and ferrite, and no detrimental phases precipitate in the weldment. The biphase ratio of austenite (γ) / ferrite (α) is adequate both in weld metal and heat-affected zone (HAZ), which is advantageous to the performance of welded joints. The weld metals have relatively lower pitting corrosion resistance compared with the 2205 base metal, and the pitting corrosion resistance of the joint produced with ER2209 is better than that of the joint with ER309 in chloride solution.

scholarly journals Corrosion Resistance and Mechanical Properties of TIG and A-TIG Welded Joints of Lean Duplex Stainless Steel S82441 / 1.4662

2016 ◽  
Vol 61 (2) ◽  
pp. 771-784 ◽  
Author(s):  
Z. Brytan ◽  
J. Niagaj
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Pitting Corrosion ◽  
Welded Joints ◽  
Heat Input ◽  
Filler Metal ◽  
Tig Welding ◽  
Lean Duplex Stainless Steel ◽  
Pitting Corrosion Resistance

Abstract This paper presents results of pitting corrosion resistance of TIG (autogenous and with filler metal) and A-TIG welded lean duplex stainless steel S82441/1.4662 evaluated according to ASTM G48 method, where autogenous TIG welding process was applied using different amounts of heat input and shielding gases like pure Ar and Ar+N2 and Ar+He mixtures. The results of pitting corrosion resistance of the welded joints of lean duplex stainless steel S82441 were studied in as weld conditions and after different mechanical surface finish treatments. The results of the critical pitting temperature (CPT) determined according to ASTM G48 at temperatures of 15, 25 and 35°C were presented. Three different surface treatment after welding were applied: etching, milling, brushing + etching. The influence of post weld surface treatment was studied in respect to the pitting corrosion resistance, basing on CPT temperature. Research on TIG welding of lean duplex stainless steel S82441/1.4662 showed a clear influence of the applied shielding gas mixtures, where the addition of 5 to 15% N2 to Ar virtually no effect on the level of resistance to pitting corrosion, only 5% N2 addition has a positive effect, while use of a mixture of 50% Ar + 50% He compared with welding at 100% Ar atmosphere, can significantly reduce the resistance to pitting corrosion. Definite good results were obtained during TIG welding with the participation of activation flux (A-TIG). The weld surface of lean duplex stainless S82441/1.4662 obtained in A-TIG welding without the addition of filler metal has a much lower tendency to pitting corrosion than traditional welds made by TIG method. Pitting corrosion resistance of welds made by A-TIG improved with the increase of the heat input in the tested range of welding current 100-200 A. It was also found that the intensity of the occurrence of pitting does not affect the method of cleaning welds after welding, but the mechanical removal of a thin surface layer of metal significantly reduces their intensity.

Sign in / Sign up

Export Citation Format

Share Document