Copper supported on porous activated carbon obtained by wetness impregnation: Effect of preparation conditions on the ozonation catalyst's characteristics

2015 ◽  
Vol 18 (1) ◽  
pp. 100-109 ◽  
Author(s):  
Asma Abdedayem ◽  
Monia Guiza ◽  
Abdelmottaleb Ouederni
Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1703 ◽  
Author(s):  
Yu ◽  
Son ◽  
Yoo ◽  
Cha ◽  
Lee ◽  
...  

Methods for the rapid removal of chemical warfare agents are of critical importance. In this work, a porous activated carbon material (C-PAC) was prepared from chitosan flakes via single-step potassium carbonate (K2CO3) activation for the prompt adsorption of dimethyl methylphosphonate (DMMP). C-PAC samples were prepared using different carbonization temperatures (350, 550, and 750 °C) at a constant K2CO3/chitosan ratio (1:2) and using different activator ratios (K2CO3/chitosan ratios of 1:0.5, 1:1, 1:2, and 1:3) at 750 °C. Furthermore, we evaluated the effect of preparation conditions on the adsorption capacities of the various C-PAC materials for DMMP under ambient conditions (25 °C). Notably, for the C-PAC material prepared at 750 °C using a K2CO3/chitosan ratio of 1:2, the DMMP adsorption was saturated at approximately 412 mg·g−1 carbon after 48 h. The good performance of this material makes it a potential candidate for use in remedial applications or protective gear.


Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 785
Author(s):  
Tai-Feng Hung ◽  
Tzu-Hsien Hsieh ◽  
Feng-Shun Tseng ◽  
Lu-Yu Wang ◽  
Chang-Chung Yang ◽  
...  

Rational design and development of the electrodes with high-mass loading yet maintaining the excellent electrochemical properties are significant for a variety of electrochemical energy storage applications. In comparison with the slurry-casted electrode, herein, a hierarchically porous activated carbon (HPAC) electrode with higher mass loading (8.3 ± 0.2 mg/cm2) is successfully prepared. The pouch-type symmetric device (1 cell) with the propylene carbonate-based electrolyte shows the rate capability (7.1 F at 1 mA/cm2 and 4.8 F at 10 mA/cm2) and the cycling stability (83% at 12,000 cycles). On the other hand, an initial discharge capacitance of 32.4 F and the capacitance retention of 96% after 30,000 cycles are delivered from a pouch-type symmetric supercapacitor (five cells). The corresponding electrochemical performances are attributed to the fascinating properties of the HPAC and the synergistic features of the resulting electrode.


2015 ◽  
Vol 3 (3) ◽  
pp. 1504-1512 ◽  
Author(s):  
Duanyi Zhang ◽  
Jiao Yin ◽  
Jiquan Zhao ◽  
Hui Zhu ◽  
Chuanyi Wang

2018 ◽  
Vol 398 ◽  
pp. 128-136 ◽  
Author(s):  
Qun Lu ◽  
Bing Lu ◽  
Manfang Chen ◽  
Xianyou Wang ◽  
Ting Xing ◽  
...  

Ionics ◽  
2019 ◽  
Vol 26 (1) ◽  
pp. 403-413 ◽  
Author(s):  
Tian Xie ◽  
Jie Wang ◽  
Xiaohong Liu ◽  
Yuanyuan Shang ◽  
Chuanli Ma ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document