Atomic-level insights into transition mechanism of dominant mixing modes of multi-component fuel droplets: From evaporation to diffusion

The investigation of the phase transiton from Bi2Sr2CaCu2O8 (2212) to Bi2Sr2Ca2Cu3O10 (2223) in the system of Bi — Sr — Ca — Cu — O is of interest both from a theoretical and a practical point of view. The result from this investigation may probably lead to a successful pure 2223 phase preparation. The preparation of pure 2223 phase with a simple and satisfactory method still remains a problem although many efforts have been made recently to produce a large percentage of 2223 phase.In order to produce pure 2223 phase most efficiently, the investigation of the transition mechanism from the 2212 to the 2223 phase is necessary. Using a JEM4000EX high resolution transmission electron microscope (HRTEM)we observed this phase transition process at atomic level. The following equation describes the phase transition from 2212 to 2223:

Download Full-text

Atomic-level imaging of the surface structure of Ag2O

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100113160 ◽

1984 ◽

Vol 42 ◽

pp. 656-657

Author(s):

William Krakow

Keyword(s):

High Vacuum ◽

Atomic Level ◽

Ultra High Vacuum ◽

Research Groups ◽

Resolution Electron ◽

Surface Reconstructions ◽

Order Of Magnitude ◽

High Resolution Electron Microscope ◽

Saturated Structure ◽

Transmission And Reflection

In recent years electron microscopy has been used to image surfaces in both the transmission and reflection modes by many research groups. Some of this work has been performed under ultra high vacuum conditions (UHV) and apparent surface reconstructions observed. The level of resolution generally has been at least an order of magnitude worse than is necessary to visualize atoms directly and therefore the detailed atomic rearrangements of the surface are not known. The present author has achieved atomic level resolution under normal vacuum conditions of various Au surfaces. Unfortunately these samples were exposed to atmosphere and could not be cleaned in a standard high resolution electron microscope. The result obtained surfaces which were impurity stabilized and reveal the bulk lattice (1x1) type surface structures also encountered by other surface physics techniques under impure or overlayer contaminant conditions. It was therefore decided to study a system where exposure to air was unimportant by using a oxygen saturated structure, Ag2O, and seeking to find surface reconstructions, which will now be described.

Download Full-text

Surface roughness measurements of vanadium-contaminated fluidized cracking catalysts by atomic force microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100166798 ◽

1996 ◽

Vol 54 ◽

pp. 866-867

Author(s):

H. Kinney ◽

M.L. Occelli ◽

S.A.C. Gould

Keyword(s):

Surface Roughness ◽

Zeolite Y ◽

Atomic Level ◽

Microporous Structure ◽

Contact Mode ◽

Force Microscopy ◽

Atomic Force ◽

Before And After ◽

Roughness Measurements ◽

Cracking Catalysts

For this study we have used a contact mode atomic force microscope (AFM) to study to topography of fluidized cracking catalysts (FCC), before and after contamination with 5% vanadium. We selected the AFM because of its ability to well characterize the surface roughness of materials down to the atomic level. It is believed that the cracking in the FCCs occurs mainly on the catalysts top 10-15 μm suggesting that the surface corrugation could play a key role in the FCCs microactivity properties. To test this hypothesis, we chose vanadium as a contaminate because this metal is capable of irreversibly destroying the FCC crystallinity as well as it microporous structure. In addition, we wanted to examine the extent to which steaming affects the vanadium contaminated FCC. Using the AFM, we measured the surface roughness of FCCs, before and after contamination and after steaming.We obtained our FCC (GRZ-1) from Davison. The FCC is generated so that it contains and estimated 35% rare earth exchaged zeolite Y, 50% kaolin and 15% binder.

Download Full-text