Monte Carlo method with Bézier curves for the complex conductivity of curved CNT-polymer nanocomposites

In this paper, effects of percolation, shape, and interphase thickness of inclusions have been studied on the effective elastic modulus of polymer nanocomposites. Inclusion distribution within the RVE has been prescribed using the Monte Carlo method, and existence of a relationship between percolation and effective Young’s modulus has been investigated. Further studies were carried out to determine the effect of increased spherical, oblate, and prolate particles in conjunction with different interphase thicknesses. Results suggest that the elastic modulus increases with the interphase thickness, and the maximum strength is associated with prolate inclusions. It has been concluded that percolation has a significant effect on the strength of polymer nanocomposites, and that it results in a spike in the value of Young’s modulus.

Download Full-text

Three-dimensional Modeling of Percolation Behavior of Electrical Conductivity in Segregated Network Polymer Nanocomposites Using Monte Carlo Method

Advances in Materials ◽

10.11648/j.am.20160501.11 ◽

2016 ◽

Vol 5 (1) ◽

pp. 1 ◽

Cited By ~ 13

Author(s):

Heng Gu

Keyword(s):

Electrical Conductivity ◽

Monte Carlo ◽

Monte Carlo Method ◽

Polymer Nanocomposites ◽

Three Dimensional ◽

Network Polymer ◽

Three Dimensional Modeling ◽

Dimensional Modeling ◽

Percolation Behavior

Download Full-text

Outbursts of comet Schwassmann-Wachmann 1, and the cloud of interplanetary boulders

International Astronomical Union Colloquium ◽

10.1017/s0252921100034035 ◽

1974 ◽

Vol 22 ◽

pp. 307 ◽

Cited By ~ 3

Author(s):

Zdenek Sekanina

Keyword(s):

Monte Carlo ◽

Monte Carlo Method ◽

Interplanetary Space ◽

Porous Matrix ◽

Maximum Diameter ◽

Expansion Velocity ◽

Solid Constituent ◽

Meteoric Material ◽

Periodic Comet

AbstractIt is suggested that the outbursts of Periodic Comet Schwassmann-Wachmann 1 are triggered by impacts of interplanetary boulders on the surface of the comet’s nucleus. The existence of a cloud of such boulders in interplanetary space was predicted by Harwit (1967). We have used the hypothesis to calculate the characteristics of the outbursts – such as their mean rate, optically important dimensions of ejected debris, expansion velocity of the ejecta, maximum diameter of the expanding cloud before it fades out, and the magnitude of the accompanying orbital impulse – and found them reasonably consistent with observations, if the solid constituent of the comet is assumed in the form of a porous matrix of lowstrength meteoric material. A Monte Carlo method was applied to simulate the distributions of impacts, their directions and impact velocities.

Download Full-text

Structures and crystallization of vacuum-deposited amorphous Se and Sb films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100173832 ◽

1990 ◽

Vol 48 (4) ◽

pp. 140-141

Author(s):

Makoto Shiojiri ◽

Toshiyuki Isshiki ◽

Tetsuya Fudaba ◽

Yoshihiro Hirota

Keyword(s):

Monte Carlo ◽

Electron Microscope ◽

Monte Carlo Method ◽

Computer Program ◽

Radial Distribution ◽

Film Formation ◽

Amorphous State ◽

Two Dimensional ◽

Amorphous Films ◽

Binding Condition

In hexagonal Se crystal each atom is covalently bound to two others to form an endless spiral chain, and in Sb crystal each atom to three others to form an extended puckered sheet. Such chains and sheets may be regarded as one- and two- dimensional molecules, respectively. In this paper we investigate the structures in amorphous state of these elements and the crystallization.HRTEM and ED images of vacuum-deposited amorphous Se and Sb films were taken with a JEM-200CX electron microscope (Cs=1.2 mm). The structure models of amorphous films were constructed on a computer by Monte Carlo method. Generated atoms were subsequently deposited on a space of 2 nm×2 nm as they fulfiled the binding condition, to form a film 5 nm thick (Fig. 1a-1c). An improvement on a previous computer program has been made as to realize the actual film formation. Radial distribution fuction (RDF) curves, ED intensities and HRTEM images for the constructed structure models were calculated, and compared with the observed ones.

Download Full-text