Influence of Polar Groups on the Ability of Polymers to Form Nanopenocox when Heated to Reduce the Fire Hazard of Building Materials

The method for estimating the influence of polar groups on the temperature of the onset of the intense thermal degradation of polymers under heating is proposed. This estimate is based on the equation for calculating this value for the entire repeating link proposed earlier [1-4]. The method is computerized and is included as an integral part of the computer program "Cascade" (INEOS RAS). The calculated estimation is carried out for one of the structures of the rejected cycloaliphatic epoxy resin. The most "weak" group was the group –CO–. The temperature of the onset of intensive thermal degradation of this group is 547 K.

An RFID Based Access Control System operating with a Computer Program and a Database

This article focuses on the realization of an access control system based on RFID (Radio Frequency by Identification) technology. It is an authentication system for controlling access to a sensitive place. This system is composed of RFID cards which are badges that act as electronic keys, an RFID reader, an electronic lock, a microcontroller, a wifi module and a database installed on a computer. The identification number of an RFID card detected by the RFID reader is transferred, via the serial interface, to the microcontroller that communicates with the computer through the wifi module for verification in the database. If the information is valid, the microcontroller triggers the opening of the electronic lock.

Application of computer technologies for calculation of gears at studying of a course " Details of machines"

The computer program GearKURT has been created to calculate mechanical gears. The program allows you to calculate gears: - closed cylindrical spur gear - closed cylindrical helical gear - open cylindrical spur gear - Novikov's gear - closed bevel spur gear - closed bevel gear with indirect teeth - open bevel gear - worm-gear. The computer program has a dialog interface written in the object-oriented programming language Delphi and compiled into an exe-file. The program allows you to choose the necessary material and method of heat treatment for the manufacture of gears, to calculate the optimal geometric dimensions and transmission parameters, to determine the design of gears. The program provides all the necessary reference materials in the form of tables and graphs, which must be used to select the coefficients and other values necessary for calculations. The program provides access to the theoretical material of the course "Machine Parts" and the ability to save the results of calculations in a separate file. Recommendations for using this program are given.

Optimization and technical-economic analysis of the production of 5-hydroxymethylfurfural from glucose / Otimização e análise técnico-econômica da produção de 5-hidroximetilfurfural a partir da glicose

In this study, the optimization of four processing schemes were developed for the production of 5 hydroxymethylfurfural (HMF), a chemical platform compound obtained from lignocellulosic biomass and used to make the connection with products from fossil resources. Despite its wide applicability, problems associated with its synthesis hindered its greater use. In this scenario the use of a computer program stands out, as the optimization of processes can be used, evaluating the factors and finding parameters that minimize the costs associated with its production. The optimization of these systems was made from the minimization of the total annual cost of the process carried out through the Aspen Plus® v.11 software, in addition, the economic feasibility of the process was analyzed and it was possible to obtain the HMF at 1.00$ .kg-1 and the co-product levulinic acid between 1.92 and 3.08 $.kg-1. It was also possible to note that among the operating costs, those from glucose had the greatest effect on its value, whereas in relation to equipment costs, reactors and distillation columns were the ones that had the greatest influence.

Gravity Anomalies, Fault Tectonics and Seismicity of the Terek-Caspian Trough

При изучении геологического строения глубокопогруженных нефтегазоперспективных горизонтов и изучении современной геодинамики Терско-Каспийского прогиба (ТКП) весьма актуальным является уточнение пространственного положения существующих и выделение новых разломных структур. Пространственное положение разломов устанавливается по комплексу геолого-геофизических критериев, причем геофизические признаки являются преобладающими. Цель. На основании карты аномалий силы тяжести масштаба 1:200 000 и карты магнитного поля масштабов 1:200 000 и 1:500 000 были созданы цифровые модели гравитационного и магнитного полей и составлена схема аномального гравитационного поля (Δga) западной части ТКП. Электронная база сейсмологической информации была составлена на основе сведений об исторических и инструментальных землетрясениях (1950–2020 гг.), а также макросейсмических данных. Методы работы. Трансформация исходного аномального гравитационного поля выполнена путем расчета вектора горизонтального градиента Wsz и третьей вертикальной производной Wzzz потенциала силы тяжести, с использованием компьютерной программы, реализующей метод F-аппроксимации, основанный на представлении потенциала аномального гравитационного и магнитного полей интегралом Фурье. Для анализа сейсмичности выполнен расчет сейсмической активности А10 по формуле Ю.В. Ризниченко с использованием компьютерной программы, реализующей способ суммирования с постоянной детальностью, основанный на суммировании числа землетрясений всех энергетических классов больше минимального представительного в фиксированной зоне осреднения. Результаты работы и обсуждение. По результатам обработки и интерпретации геофизических данных построена серия тематических карт по территории ТКП: карты вектора горизонтального градиента Wsz и третьей вертикальной производной Wzzz потенциала силы тяжести; карта сейсмической активности А10. На основе анализа полученных данных с привлечением существующей геологической информации уточнено положение известных разломов и выделены новые, по итогам исследований составлена карта разломов западной части ТКП When studying the geological structure of deeply submerged oil and gas promising horizons and studying the modern geodynamics of the Terek-Caspian trough (TCT), it is very important to clarify the spatial position of the existing fault structures and identify new ones. To determine the spatial position of the faults, a set of geological and geophysical criteria is established, with geophysical features prevailing. Aim. Based on the gravity anomaly map of scale 1: 200,000 and magnetic field maps of scales 1: 200,000 and 1: 500,000, digital models of gravitational and magnetic fields were created and a diagram of the anomalous gravitational field (Δga) of the western part of the TCT was drawn. The electronic database of seismological information was compiled on the basis of information about historical and instrumental earthquakes (1950–2020), as well as macroseismic data. Methods. The transformation of the initial anomalous gravitational field is performed by calculating the horizontal gradient vector Wszand the third vertical derivative Wzzzof the gravity potential using a computer program that implements the F-approximation method based on the representation of the potential of the anomalous gravitational and magnetic fields by the Fourier integral. To analyze the seismicity, the seismic activity А10 was calculated according to the formula of Yu.V. Riznichenko using a computer program that implements the summation method with constant detail, based on the summation of the number of earthquakes of all energy classes greater than the minimum representative in a fixed averaging zone. Results and discussion. Based on the results of processing and interpretation of geophysical data, a set of thematic maps was built for the TCT territory. This set includes maps of the horizontal gradient vector Wsz and the third vertical derivative Wzzz of the gravity potential; seismic activity map А10. Based on the analysis of the data obtained with the involvement of existing geological information, the position of the known faults was clarified and new ones were identified, based on the results of the research, a map of the faults for the western part of the TCT was compiled

Assessing the Believability of Computer Players in Video Games: A New Protocol and Computer Tool

In this paper, we address the challenge of believability in multiplayer video games. Our contribution is a system for assessing the believability of computer players. The state of the art examines existing methods and identifies seven distinguishing features that differ considerably from one assessment to the next. Our investigation reveals that assessment procedures typically alter gameplay, posing a considerable danger of bias. This is a major flaw since computer players are evaluated in a specific context rather than in the context of the game as it should be played, potentially skewing the findings of the evaluation. As a result, we begin on a trial-and-error process, with each new proposal building on the achievements of the previous one while removing the flaws. New proposals are tested with new assessments, a total of three experiments are then presented. We created a computer program that partially automates the execution of the assessment procedure, making these trials easier to implement. At the end, thanks to our proposal, gamers can assess the believability of computer players indirectly by employing reporting forms that alert users to the presence of bots. We assume that the more a bot is reported, the less credible it becomes. We ran a final experiment to test our proposal, which yielded extremely encouraging results.

Cervix-Online computer program: 27 years of hospital-based clinical registry for cervical cancer at the University Medical Centre Maribor

Background Clinical registries are designed to collect quality data about the care for cancer patients in order to improve it. They gather data that are generated during diagnosis and cancer treatment and also post-treatment follow-up. Analysis of collected data allows an improvement in the quality of patient care and a comparison with other health care providers. The aim of the present article is to describe the current version and practice of hospital-based cervical cancer registry in UKC Maribor. Materials and methods The first questionnaire for monitoring patients with cervical cancer was introduced at the Department of Gynecologic and Breast Oncology of the Maribor General Hospital in 1994. Since then, the principles for treating cervical cancer have been revised on several occasions. Therefore, based on our experience and new approaches to treatment, we have frequently amended the questionnaire content. It was redesigned into a form that is currently in use and transformed into a Cervix-Online computer program in 2014. Results Over the last 27 years, we have collected data on cervical cancer patients treated at the University Medical Centre Maribor and former Maribor General Hospital. The Cervix-Online computer program that was developed for this purpose enabled a rapid and reliable collection, processing and analysis of 116 different data of patients with cervical cancer, including general data, history, diagnostic procedures, histopathological examination results, treatment methods, and post-treatment follow-ups. Conclusions The hospital-based cervical cancer registry with Cervix-Online computer program enables the collection of data to enhance diagnosis and the treatment of cervical cancer patients, the organization of day-to-day service, as well as the comparison of our treatment results with national and international standards. Incomplete or incorrect data entry, however, might pose a limitation of the clinical registry, which depends on several healthcare professionals involved in the diagnostic procedures, treatment, and follow-up of cervical cancer patients.

Selection of the chemical composition of steels and their thermal hardening mode using a computer program

The relationships between the parameters of the structure of heat‑treated steels and their abrasive wear resistance are established. At all temperatures of the final tempering of hardened steel, there is a direct relationship between its structure parameters (the number of elements in a solid solution, the density of dislocations, the size of cementite particles and the intercementite distance) and wear resistance when sliding friction against loose abrasive particles. A computer program has been developed to select the chemical composition of the steel grade and methods of thermal hardening in order to ensure the required wear resistance.

Parents' knowledge of neonatal transitory conditions and their expectations of the midwife

Introduction The neonatal period is the period of the child's adaptation to life outside the mother's body. The child has to adapt to the changes taking place in its body. After delivery, the new-born baby is assessed according to the Apgar scale. Objective of the study The objective of the study was to assess the parents' knowledge of the transitory conditions of neonates and to identify their expectations towards medical personnel. Material and methods 248 women participated in the study. Inhabitants of large cities accounted for 64.5% of the respondents and 16.2% of the respondents were inhabitants of rural areas. Women aged over 35 accounted for 46.8% of patients, 19.3% were patients between the ages of 26 and 30. Patients between the ages of 30 and 35 also accounted for 19.3%. Patients under 25 years of age accounted for 14.6%. The Bioethics Committee approved the project. Statistical analysis was performed with the use of the Statistica computer program. Results 81% of women displayed knowledge about the duration of the neonatal period. 62% of the respondents knew the effect of vitamin K in preventing the occurrence of haemorrhagic disease in the neonate. Half of the women prefer to feed on demand. A big problem among women in childbed is the lack of access to a psychologist. Conclusions Parents cannot recognize transitory conditions in a neonate. Antenatal education of future mothers influences their pro-health behaviour. Parents source their knowledge from their family, friends, guides and books.