Flame jet has a wide range of applications in the industries and also in domestics field. The efforts have been put to enhance the heat transfer and to reduce the emissions from the premixed and inverse diffusion flame burners. Especially, the IDF burner suffers from lack of proper air and fuel mixing, the swirl generated motion from twisted tape would improve the combustion efficiency. Therefore, an aim of experiment is to study the heat transfer characteristics of an inverse diffusion flame (IDF) jet impinging on a flat surface in a coaxial tube burner with swirl. The twisted tape of 15mm pitch creates the swirl in the flame jet (Corresponding to the twist ratio of 3 and swirl number of 0.52). An effect of swirl at air jet Reynolds number of 1000 to 2500 and surface of the burner-to-impingement plate distance (H/da) varying from 2 to 20 is studied at fixed equivalence ratio (ϕ) of 1.1. An average heat flux and peak heat flux are studied for the region of 0<r/da<3 on an impingement plate. From an investigation, it is found that the swirling in the flame jet enhances the average heat flux by up to 179.2%. The maximum average heat flux is found at the optimal burner-to-target plate distance of 8.
Heat Transfer Characteristics of a Coaxial Inverse Diffusion Flame Jet Impingement with an Induced Swirl
