Numerical study of heat transfer and flow structure over channel surfaces featuring miniature V rib-dimples with various configurations

2022 ◽  
Vol 172 ◽  
pp. 107342
Author(s):  
Shuangye Ran ◽  
Peng Zhang ◽  
Yu Rao
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Numerical Study

scholarly journals Numerical study of heat transfer and flow structure over a microscale backstep

2021 ◽  
Vol 60 (3) ◽  
pp. 2759-2768
Author(s):  
Hassnia Hajji ◽  
Lioua Kolsi ◽  
Kaouther Ghachem ◽  
Chemseddine Maatki ◽  
Ahmed Kadhim Hussein ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Numerical Study

3D numerical study on flow structure and heat transfer in a circular tube with V-baffles

2015 ◽  
Vol 23 (2) ◽  
pp. 342-349 ◽  
Author(s):  
Withada Jedsadaratanachai ◽  
Nuthvipa Jayranaiwachira ◽  
Pongjet Promvonge
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Circular Tube ◽  
Numerical Study

scholarly journals 3D Magneto-Buoyancy-Thermocapillary Convection of CNT-Water Nanofluid in the Presence of a Magnetic Field

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 258 ◽  
Author(s):  
Lioua Kolsi ◽  
Salem Algarni ◽  
Hussein A. Mohammed ◽  
Walid Hassen ◽  
Emtinene Lajnef ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Flow Structure ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Numerical Study ◽  
Flow Stabilization ◽  
Magnetic Field Magnitude ◽  
The Magnetic Field

A numerical study is performed to investigate the effects of adding Carbon Nano Tube (CNT) and applying a magnetic field in two directions (vertical and horizontal) on the 3D-thermo-capillary natural convection. The cavity is differentially heated with a free upper surface. Governing equations are solved using the finite volume method. Results are presented in term of flow structure, temperature field and rate of heat transfer. In fact, results revealed that the flow structure and heat transfer rate are considerably affected by the magnitude and the direction of the magnetic field, the presence of thermocapillary forces and by increasing nanoparticles volume fraction. In opposition, the increase of the magnetic field magnitude leads to the control the flow causing flow stabilization by merging vortexes and reducing heat transfer rate.

Optimization and Development for Fin-and-Tube Heat Exchangers With Vortex Generators

2010 ◽  
Author(s):  
Ya-Ling He ◽  
Pan Chu ◽  
Wen-Quan Tao
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Flow Structure ◽  
Heat Exchangers ◽  
Pressure Loss ◽  
Numerical Study ◽  
Moderate Pressure ◽  
Computational Domain ◽  
Transfer Enhancement ◽  
Local Flow

In this paper, heat transfer enhancement and pressure loss penalty for fin-and-tube heat exchangers with rectangular winglet pairs (RWPs) were numerically investigated in a relatively low Reynolds number flow. The purpose of this study was to explore the fundamental mechanism between the local flow structure and the heat transfer augmentation. The RWPs were placed with a special orientation for the purpose of enhancement of heat transfer. The numerical study involved three-dimensional flow and conjugate heat transfer in the computational domain, which was set up to model the entire flow channel in the air flow direction. The effects of attack-angle of RWPs, row-number of RWPs and placement of RWPs on the heat transfer characteristics and flow structure were examined in detail. It was observed that the longitudinal vortices caused by RWPs and the impingement of RWPs-directed flow on the downstream tube were important reasons of heat transfer enhancement for fin-and-tube heat exchangers with RWPs. It was interesting to find that the pressure loss penalty of the fin-and-tube heat exchangers with RWPs could be reduced by altering the placement of the same number of RWPs from inline array to staggered array and simultaneously maintain the heat transfer enhancement level. The results showed that the rectangular winglet pairs (RWPs) can significantly improve the heat transfer performance of the fin-and-tube heat exchangers with a moderate pressure loss penalty.

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels With Dimples of Different Shapes

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
Yu Rao ◽  
Yan Feng ◽  
Bo Li ◽  
Bernhard Weigand
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Flow Structure ◽  
Channel Flow ◽  
Numerical Study ◽  
Rectangular Channel ◽  
Transfer Enhancement ◽  
Number Range ◽  
Flow Friction ◽  
Different Shapes

An experimental and numerical study was conducted to investigate the effects of dimple shapes on the heat transfer and flow friction of a turbulent flow over dimpled surfaces with different dimple shapes: spherical, teardrop, elliptical, and inclined elliptical. These dimples all have the same depth. The heat transfer, friction factor, and flow structure characteristics in the cooling channels with dimples of different shapes have been obtained and compared with each other for a Reynolds number range of 8500–60,000. The study showed that the dimple shape can have distinctive effects on the heat transfer and flow structure in the dimpled channels. The teardrop dimples show the highest heat transfer, which is about 18% higher than the conventional spherical dimples; and the elliptical dimples have the lowest heat transfer, which is about 10% lower than the spherical dimples; and however the inclined elliptical dimples have comparable heat transfer and pressure loss performance with the spherical dimples. The experiments still showed the realistic heat transfer enhancement capabilities of the dimpled channels relative to a smooth rectangular channel flow under the same flow and thermal boundary conditions, even after considering the thermal entrance effects in the channel flow and the enlarged heat transfer (wetted) area due to the dimpled surface. The three-dimensional numerical computations showed different vortex flow structures and detailed heat transfer characteristics of the dimples with different shapes, which revealed the influential mechanisms of differently shaped dimples on the convective heat transfer enhancement.

scholarly journals Numerical study on aerothermal performance of shroud movement in the vivinity of turbine tips

2020 ◽  
pp. 321-321
Author(s):  
Yunsong Zhang ◽  
Yongbao Liu ◽  
Yujie Li ◽  
Qijie Li
Keyword(s):  
Heat Transfer ◽  
Secondary Flow ◽  
Flow Structure ◽  
Numerical Study ◽  
Three Dimensional ◽  
Breakdown Point ◽  
Axial Direction ◽  
Suction Surface ◽  
Initial Location ◽  
Dimensional Simulation

In this paper, the effects of shroud movement on transonic flow and heat transfer in the vicinity of turbine tip was studied by using three-dimensional simulation of GE-E3 first-stage HPT. Aerothermal performance and flow structure were analyzed with and without turbine shroud moving, respectively. Based on the distribution of limiting streamlines and the vortex structures, the influential characteristics between the leakage flow and the secondary flow generated by shroud movement were studied. Moreover, the coefficient of heat transfer at the wall were investigated. Results show that the flow structure is changing with the movement of turbine shroud, and the location of the separation line changes significantly by the influence of the secondary flow. The leakage vortex initial location delayed in axial direction and its breakdown point located at 65% cross section. This accelerates the mixing loss and increase the perturbation. In addition, it is observed that the coefficient of average heat transfer is increased obviously by 54.8% in the region of shroud surface. However, this coefficient in the region of suction surface decreased by 11.9%.

Heat Transfer and Turbulent Flow Structure in Channels With Miniature V-Shaped Rib-Dimple Hybrid Structures on One Wall

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Peng Zhang ◽  
Yu Rao ◽  
Yanlin Li ◽  
Bernhard Weigand
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Secondary Flow ◽  
Flow Structure ◽  
Pressure Loss ◽  
Numerical Study ◽  
Hybrid Structures ◽  
Numerical Computations ◽  
Turbulent Flow Structure ◽  
Near Wall

An experimental and numerical study has been conducted on heat transfer and turbulent flow structure in channels with novel hybrid structures with miniature V-shaped ribs and dimples on one wall. One miniature V-shaped rib was arranged immediately upstream each individual dimple to form the hybrid structure, which aims at inducing additional near-wall secondary flow interacting with the dimple vortex flow and further improving the heat transfer. Steady-state convective heat transfer experiments were done to obtain the heat transfer and pressure loss of the turbulent flow over the surfaces with the miniature V rib-dimples for the Reynolds numbers from 18,700 to 60,000. In addition, the turbulent flow structure in the V rib-dimpled channels has been predicted by carrying out numerical computations. The experimental results indicated that the overall heat transfer enhancement of the miniature V rib-dimpled channels can be increased by up to about 60.0% compared with the counterpart of the dimpled only channel, and by about 23.0% compared with the counterpart of the miniature V ribbed only channel. The miniature V ribs showed appreciable effects on the heat transfer and pressure loss characteristics for the turbulent flow over the V rib-dimpled surfaces. The numerical computations showed that the miniature V rib upstream each dimple produced strong near-wall downwashing secondary flow, which significantly changed the flow patterns and intensified the turbulent flow mixing inside and outside the dimple and above the surrounding wall. These unique near-wall flow characteristics generated a significant heat transfer improvement in both the magnitude and the uniformity.

Sign in / Sign up

Export Citation Format

Share Document