heat transfer rate
Recently Published Documents


TOTAL DOCUMENTS

860
(FIVE YEARS 281)

H-INDEX

37
(FIVE YEARS 8)

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 276
Author(s):  
Umair Khan ◽  
Aurang Zaib ◽  
Iskandar Waini ◽  
Anuar Ishak ◽  
El-Sayed M. Sherif ◽  
...  

Colloidal suspensions of regular fluids and nanoparticles are known as nanofluids. They have a variety of applications in the medical field, including cell separation, drug targeting, destruction of tumor tissue, and so on. On the other hand, the dispersion of multiple nanoparticles into a regular fluid is referred to as a hybrid nanofluid. It has a variety of innovative applications such as microfluidics, heat dissipation, dynamic sealing, damping, and so on. Because of these numerous applications of nanofluids in minds, therefore, the objective of the current exploration divulged the axisymmetric radiative flow and heat transfer induced by hybrid nanofluid impinging on a porous stretchable/shrinkable rotating disc. In addition, the impact of Smoluchowski temperature and Maxwell velocity slip boundary conditions are also invoked. The hybrid nanofluid was formed by mixing the copper (Cu) and alumina (Al2O3) nanoparticles scattered in the regular (viscous) base fluid (H2O). Similarity variables are used to procure the similarity equations, and the numerical outcomes are achieved using bvp4c in MATLAB software. According to the findings, double solutions are feasible for stretching (λ>0) and shrinking cases (λ<0). The heat transfer rate is accelerated as the hybrid nanoparticles increases. The suction parameter enhances the friction factors as well as heat transfer rate. Moreover, the friction factor in the radial direction and heat transfer enrich for the first solution and moderate for the second outcome due to the augmentation δ1, while the trend of the friction factor in the radial direction is changed only in the case of stretching for both branches.


Author(s):  
K Govindarajulu ◽  
A Subramanyam Reddy

The current exploration deals with the third grade hydromagnetic pulsating flow of blood-gold nanofluid in a channel with the presence of Ohmic heating, viscous dissipation and radiative heat. In the present analysis, blood (base fluid) is considered as third-grade fluid and gold (Au) as nanoparticle. This investigation is useful in the fields of food processing system, pressure surges (pulsatile flow application), biomedical engineering, nano drug delivery, radiotherapy, and cancer therapeutic (nanofluid application). Perturbation method is employed to transform the set of governing partial differential equations (PDEs) into the ordinary differential equations (ODEs) and then solved by employing the fourth order Runge-Kutta method with the aid of the shooting technique. The impacts of emerging dimensionless parameters of velocity, temperature, and heat transfer rate of blood-Au nanofluid are analysed via pictorial outcomes in detail. The obtained results depict that the improvement in viscous dissipation and heat source enhanced the temperature of third grade nanofluid. The velocity and temperature of the nanofluid are declining functions with the enhancement of frequency parameter, material parameter, and non-Newtonian parameter respectively. Intensifying the volume fraction of nanoparticle dwindles the velocity and temperature of nanofluid. Enhancing volume fraction and viscous dissipation accelerates the heat transfer rate of nanofluid. The velocity, temperature, and heat transfer rates are decreased by an escalation of the Hartmann number. Further, enhancing the radiation parameter reduces the heat transfer rate and temperature of nanofluid.


Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 400
Author(s):  
Miftah Altwieb ◽  
Rakesh Mishra ◽  
Aliyu M. Aliyu ◽  
Krzysztof J. Kubiak

Multi-tube multi-fin heat exchangers are extensively used in various industries. In the current work, detailed experimental investigations were carried out to establish the flow/heat transfer characteristics in three distinct heat exchanger geometries. A novel perforated plain fin design was developed, and its performance was evaluated against standard plain and louvred fins designs. Experimental setups were designed, and the tests were carefully carried out which enabled quantification of the heat transfer and pressure drop characteristics. In the experiments the average velocity of air was varied in the range of 0.7 m/s to 4 m/s corresponding to Reynolds numbers of 600 to 2650. The water side flow rates in the tubes were kept at 0.12, 0.18, 0.24, 0.3, and 0.36 m3/h corresponding to Reynolds numbers between 6000 and 30,000. It was found that the louvred fins produced the highest heat transfer rate due to the availability of higher surface area, but it also produced the highest pressure drops. Conversely, while the new perforated design produced a slightly higher pressure drop than the plain fin design, it gave a higher value of heat transfer rate than the plain fin especially at the lower liquid flow rates. Specifically, the louvred fin gave consistently high pressure drops, up to 3 to 4 times more than the plain and perforated models at 4 m/s air flow, however, the heat transfer enhancement was only about 11% and 13% over the perforated and plain fin models, respectively. The mean heat transfer rate and pressure drops were used to calculate the Colburn and Fanning friction factors. Two novel semiempirical relationships were derived for the heat exchanger’s Fanning and Colburn factors as functions of the non-dimensional fin surface area and the Reynolds number. It was demonstrated that the Colburn and Fanning factors were predicted by the new correlations to within ±15% of the experiments.


Author(s):  
Bouziane Boudraa ◽  
Rachid Bessaïh

In the last few years, modern heat transfer technologies significantly improved to provide more efficient systems in industries. One of those technologies is cooling electronic components in laminar flow using water nanofluids, which is interesting. This research used a ternary hybrid nanofluid with various nanoparticle forms to conduct a numerical investigation of three-dimensional heat transfer and fluid flow over a heated block exposed to a horizontal flow and an impinging jet. The effects of several variables such as the Reynolds number ratio [Formula: see text], volume fraction of nanoparticles [Formula: see text], length of extended jet hole [Formula: see text], and the influence of the inclination angle of the impinging jet inlet [Formula: see text] on the fluid flow and heat transfer were examined. Using the Ansys-Fluent 14.5 program and under laminar flow conditions, the finite-volume method was applied with the help of the SIMPLE algorithm to solve continuity, momentum, and energy equations. Several characteristics are assessed, including velocity streamline, isotherm contours, Nusselt number contours, the average Nusselt number ([Formula: see text]), the friction factor [Formula: see text], and drop pressure [Formula: see text]. The findings of the current analysis revealed that adding an impinging jet can boost the heat transfer rate up to [Formula: see text] better than a non-impingement jet. Also, a significant enhancement in the heat transfer rate was obtained when growing one of these parameters α, [Formula: see text], and E. Moreover, the ternary hybrid nanofluid with different nanoparticle forms significantly boosts the heat transfer rate compared to the traditional nanofluid. The maximum heat transfer is reached as the velocity of the impinging jet rises. Inclining the angle of the impinging jet inlet with [Formula: see text] toward the channel inlet boosted the rate of heat transfer up to [Formula: see text] compared to the perpendicular impinging jet [Formula: see text]. A strong consensus has been reached with the theoretical and experimental findings found in the literature.


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Ahmad Haghani ◽  
Mehdi Jahangiri ◽  
Rouhollah Yadollahi Farsani ◽  
Ayoub Khosravi Farsani ◽  
Jalal Fazilatmanesh

Fluid-solid interaction phenomenon study is necessary for the analysis of several engineering systems such as structures and vessels that interact with wind and blood flow, respectively. In this study, the interactions between buoyancy-driven airflow and elastic baffle(s) inside a square enclosure were modeled numerically. While the two sidewalls of the enclosure were insulated, the lower and upper walls were kept at hot and cold temperatures, respectively. The heat transfer rate through the hot wall by calculating the Nusselt number and von Mises stress at the baffles’ root for various configurations of baffle(s) was considered. The domain was modeled in ANSYS Workbench, and the k-ε model was employed to solve the turbulent convective flow (Ra > 107). A two-way algorithm along with the finite element method was employed to simultaneously solve the equations governing the fluid flow and the solid phase. The dynamic mesh method was employed to account for the change in the location of the fluid domain at a new time step. The results show the elastic baffle, in comparison to solid baffle, intensifies the heat transfer rate by 15%. The results also indicate that the Nusselt number in the single-baffle case is higher than in double-baffle cases. The fact that the amount of von Mises is a function of the baffles’ configuration is another point obtained from the results. It was found that the von Mises stress at the baffles’ root represents more unsteady fluctuations in the asymmetric case, while it approaches a constant value in the symmetric case.


2021 ◽  
Vol 9 ◽  
Author(s):  
Kun Zhang ◽  
Yu Zhang ◽  
Xiaoyu Wang ◽  
Liangbi Wang

Detailed numerical calculations are performed for investigating the effect of fin number and position on unsteady natural convection heat transfer in internally finned horizontal annulus. The SIMPLER algorithm with Quick scheme is applied for solving the Navier Stokes equations of flow and heat transfer. The results show that the heat transfer rate in annulus with fins increases with the increasing numbers of fin and Rayleigh numbers. For Ra = 2 × 105, the effect of numbers of fins and fins position at the bottom part on the unsteady solutions can be neglected, because the self-oscillation phenomenon is mainly affected by natural convection at the upper part of annulus. Although the fin positions cannot increase heat transfer rate significantly in the case of four fins, the self-oscillated solutions can be suppressed by altering fins position.


Mathematics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Nor Azizah Yacob ◽  
Nor Fadhilah Dzulkifli ◽  
Siti Nur Alwani Salleh ◽  
Anuar Ishak ◽  
Ioan Pop

The steady three-dimensional rotating flow past a stretching/shrinking surface in water and kerosene-based nanofluids containing single and multi-walled carbon nanotubes (CNTs) is investigated. The governing equations are converted to similarity equations, and then numerically solved using MATLAB software. The impacts of rotational, suction, and nanoparticle volume fraction on the flow and the thermal fields, as well as velocity and temperature gradients at the surface, are represented graphically and are analyzed. Further, the friction factor and the heat transfer rate for different parameters are presented in tables. It is found that the heat transfer rate increases with increasing nanoparticle volume fraction as well as suction parameter in water and kerosene-based nanofluids of single and multi-walled CNTs. However, the increment in the rotating flow parameter decreases the rate of heat transfer. Multi-walled carbon nanotubes and kerosene-based nanofluid contribute to heat transfer rates better than single-walled carbon nanotubes and water-based nanofluid, respectively. A unique solution exists for the stretching surface, while two solutions are obtained for the shrinking surface. Further analysis of their stabilities shows that only one of them is stable over time.


Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8412
Author(s):  
Liang Xu ◽  
Tao Yang ◽  
Yanhua Sun ◽  
Lei Xi ◽  
Jianmin Gao ◽  
...  

In order to achieve uniform and effective impingement cooling, a swirling jet with a swirling angle of 45° (SIJ 45°) is put forward in this paper. Namely, there are four 45° spiral grooves equipped on the inner wall of the circular hole. The difference in the flow field and heat transfer characteristics between the conventional impinging jet (CIJ) and SIJ 45° is compared and analyzed. The spiral channels can increase the heat transfer rate and cooling uniformity because of the action of superimposed airflow. In addition, the thread nozzle brings lower pressure loss, which can reduce the airflow friction while effectively ensuring high heat transfer in the center area of the jet. An experimental system is built to investigate the heat transfer and flow characteristics of the impingement surface. Smoke flow visualization technology is used to explore the complex flow field of the CIJ and SIJ 45°, and the heat transfer rate of the target surface is analyzed based on thermocouple data. When 6000≤Re≤30,000, and 1≤h/dj≤8, the averaged Nusselt number (Nu) correlation for SIJ 45° is established, which is in good agreement with the experimental results. SIJ 45° is an effective measure to replace the CIJ, and the research herein provides some reference for designing the structure of new jets.


Mathematics ◽  
2021 ◽  
Vol 9 (24) ◽  
pp. 3176
Author(s):  
Sumayyah Alabdulhadi ◽  
Iskandar Waini ◽  
Sameh E. Ahmed ◽  
Anuar Ishak

This paper examines the hybrid nanoparticles and the magnetic field impacts on the mixed convection boundary layer flow and heat transfer caused by an inclined shrinking–stretching surface in a hybrid nanofluid. Silver (Ag) is added into a MgO–water nanofluid to form Ag-MgO–water hybrid nanofluid. By making use of proper similarity transformations, the governing equations are transformed to ordinary differential equations. The problem is numerically solved with the help of the MATLAB function bvp4c. The influences of the chosen parameters on the temperature, velocity, heat transfer rate and the skin friction coefficient are addressed and graphically illustrated. The results show that increasing the magnetic parameter substantially improves the heat transfer rate and increases the skin friction coefficient. The findings also suggest that increasing the nanoparticle volume fraction φ2 (Ag) improves the skin friction coefficient while decreasing the heat transfer rate. For both stretching and shrinking instances, non-unique (dual) solutions are discovered. Only the first solution is stable, according to the temporal stability analysis of the dual solutions.


Sign in / Sign up

Export Citation Format

Share Document