The South African mining industry is one of the largest producers of platinum (Pt) in the world. Workers in this industry are exposed to significant amounts of dust, and this dust consists of particles sizes that can penetrate deep inside the respiratory region. A cross-sectional study was conducted to evaluate dust exposure risk at two Pt mine waste rock crusher plants (Facility A and B) in Limpopo, South Africa. Workers’ demographic and occupational information was collected through a structured questionnaire, a walk-through observation on facilities’ processes, and static dust sampling for the collection of inhalable and respirable dust particles using the National Institute for Occupational Safety and Health (NIOH) 7602 and the Methods for Determination of Hazardous Substance (MDHS) 14/4 as guidelines. Only 79% of Pt mine workers, used their respiratory protective equipment (RPE), sixty-five percent were exposed to work shifts exceeding the recommended eight hours and 8.8% had been employed for more than ten years. The mean time-weighted average (TWA) dust concentrations between Facility A and B showed a significant difference (p < 0.026). The Pt mine’s inhalable concentrations (range 0.03–2.2 mg/m3) were higher than the respirable concentrations (range 0.02–0.7 mg/m3), however were all below the respective international and local occupational exposure limits (OELs). The Pt mine’s respirable crystalline silica (SiO2) quartz levels were all found below the detectable limit (<0.01 mg/m3). The Pt miners had increased health risks due to accumulated low levels of dust exposure and lack of usage of RPE. It is recommended that an improved dust control program be put in place which includes, but is not limited to, stockpile enclosures, tire stops with water sprays, and education on the importance of RPE usage.
Valorisation of mine waste - Part I: Characteristics of, and sampling methodology for, consolidated mineralised tailings by using Witwatersrand gold mines (South Africa) as an example
