Mixed matrix membrane performance enhancement using alkanolamine solution

2015 ◽  
Vol 483 ◽  
pp. 84-93 ◽  
Author(s):  
Rizwan Nasir ◽  
Hilmi Mukhtar ◽  
Zakaria Man ◽  
Binay K. Dutta ◽  
Maizatul Shima Shaharun ◽  
...  
2019 ◽  
Vol 19 (3) ◽  
pp. 650 ◽  
Author(s):  
Triyanda Gunawan ◽  
Retno Puji Rahayu ◽  
Rika Wijiyanti ◽  
Wan Norharyati Wan Salleh ◽  
Nurul Widiastuti

Mixed Matrix Membranes (MMMs) which consist of 0.3 wt.% Zeolite-Carbon Composite (ZCC) dispersed in BTDA-TDI/MDI (P84 co-polyimide) have been prepared through phase inversion method by using N-methyl-2-pyrrolidone (NMP) as a solvent. Membranes were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Thermogravimetric Analysis (TGA), and Fourier Transform Infrared (FTIR). Membrane performance was measured by a single gas permeation of CO2 and CH4. The maximum permeability of CO2 and CH4, which up to 12.67 and 6.03 Barrer, respectively. P84/ZCC mixed matrix membrane also showed a great enhancement in ideal selectivity of CO2/CH4 2.10 compared to the pure P84 co-polyimide membrane.


Author(s):  
Nor Hafiza Ismail ◽  
Wan Norharyati Wan Salleh ◽  
Siti Zu Nurain Ahmad ◽  
Ahmad Fauzi Ismail

2018 ◽  
Vol 6 (6) ◽  
pp. 2775-2791 ◽  
Author(s):  
Hossein Molavi ◽  
Akbar Shojaei ◽  
Seyyed Abbas Mousavi

The major obstacles in gas separation by mixed-matrix membranes (MMMs) are poor dispersion and poor affinity between polymers and fillers.


Author(s):  
N H Ismail ◽  
W N Wan Salleh ◽  
S Z N Ahmad ◽  
N A Mohd Razali ◽  
N Rosman ◽  
...  

2013 ◽  
Vol 113 (7) ◽  
pp. 4980-5028 ◽  
Author(s):  
Hoang Vinh-Thang ◽  
Serge Kaliaguine

2018 ◽  
Vol 47 (9) ◽  
pp. 2035-2045 ◽  
Author(s):  
Nurul ‘Adilah Rosnan ◽  
Yeit Haan Teow ◽  
Abdul Wahab Mohammad

2015 ◽  
Vol 14 (2) ◽  
pp. 28
Author(s):  
Rizwan Nasir ◽  
Hilmi Mukhtar ◽  
Zakaria Man ◽  
Maizatul Shima Bt. Shaharun ◽  
Mohamad Zailani Abu Bakar

Diethanolamine (DEA) solution was used in this study to enhance the performance of polyethersulfone (PES) – carbon molecular sieve (CMS) mixed matrix membrane (MMMs). These new amine mixed matrix membranes (A3Ms) were fabricated at room temperature by using fixed concentration of PES, CMS and different concentrations (5, 10 wt. %) of DEA. The developed mixed matrix membranes were characterized by using field emission scanning electron microscope (FESEM) and thermogravimetric analyser (TGA) in order to investigate the effect of DEA addition on morphology and thermal stability. Gas performance tests were also performed to measure the permeance and selectivity. The characterization results showed that the membranes were thermally stable, dense and non-porous. The gas performance tests showed that the permeance and selectivity of A3Ms is higher than the native PES membrane. CO2 permeance increases with the increase of DEA concentration. Hence it was found that with an addition of 10% (wt. %) DEA at a pressure of 2 bars, the CO2 permeance was increased from 50.86 to 127.06 GPU and the CO2/CH4 selectivity was also increased from 3.08 to 12.30.


2017 ◽  
Vol 17 (8) ◽  
pp. 4467-4488 ◽  
Author(s):  
Janina Dechnik ◽  
Christopher J. Sumby ◽  
Christoph Janiak

2020 ◽  
Author(s):  
Muayad Al-shaeli ◽  
Stefan J. D. Smith ◽  
Shanxue Jiang ◽  
Huanting Wang ◽  
Kaisong Zhang ◽  
...  

<p>In this study, novel <a>mixed matrix polyethersulfone (PES) membranes</a> were synthesized by using two different kinds of metal organic frameworks (MOFs), namely UiO-66 and UiO-66-NH<sub>2</sub>. The composite membranes were characterised by SEM, EDX, FTIR, PXRD, water contact angle, porosity, pore size, etc. Membrane performance was investigated by water permeation flux, flux recovery ratio, fouling resistance and anti-fouling performance. The stability test was also conducted for the prepared mixed matrix membranes. A higher reduction in the water contact angle was observed after adding both MOFs to the PES and sulfonated PES membranes compared to pristine PES membranes. An enhancement in membrane performance was observed by embedding the MOF into PES membrane matrix, which may be attributed to the super-hydrophilic porous structure of UiO-66-NH<sub>2</sub> nanoparticles and hydrophilic structure of UiO-66 nanoparticles that could accelerate the exchange rate between solvent and non-solvent during the phase inversion process. By adding the MOFs into PES matrix, the flux recovery ratio was increased greatly (more than 99% for most mixed matrix membranes). The mixed matrix membranes showed higher resistance to protein adsorption compared to pristine PES membranes. After immersing the membranes in water for 3 months, 6 months and 12 months, both MOFs were stable and retained their structure. This study indicates that UiO-66 and UiO-66-NH<sub>2</sub> are great candidates for designing long-term stable mixed matrix membranes with higher anti-fouling performance.</p>


2021 ◽  
Vol 13 (9) ◽  
pp. 11296-11305
Author(s):  
Xu Jiang ◽  
Shanshan He ◽  
Gang Han ◽  
Jun Long ◽  
Songwei Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document