Water gas shift and sorption-enhanced water gas shift reactions using hydrothermally synthesized novel Cu–Mg–Al hydrotalcite-based catalysts for hydrogen production

2021 ◽  
Vol 145 ◽  
pp. 111064
Author(s):  
Chan Hyun Lee ◽  
Suji Kim ◽  
Hyung Jin Yoon ◽  
Chang Won Yoon ◽  
Ki Bong Lee
Author(s):  
Giovanni Pisani ◽  
Alberto Zerbinato ◽  
Carlo Tregambe ◽  
Ernesto Benini

This paper describes technological of a fuel processor for hydrogen production able to convert 10 cubic meters of methane per hour. This device has been developed to feed hydrogen CHP suitable for the most common residential applications. The measured conversion efficiencies are extremely high: after the steam reformer the results are 76%H2; 18%CO2; 0,5%CH4; 5%CO; but the carbon monoxide is totally reduced throughout the water gas shift and the partial oxidation which contemporarily increase the hydrogen to over 77%. According to these results, this fuel processor is one of the first middle sized reformer to achieve, at comparable costs per cubic meter, conversion performance that were normally obtained only by industrial reforming plants.


2008 ◽  
Vol 20 (6) ◽  
pp. 064237 ◽  
Author(s):  
S M Opalka ◽  
T H Vanderspurt ◽  
R Radhakrishnan ◽  
Y She ◽  
R R Willigan

Author(s):  
Leteng Lin ◽  
Li Sun ◽  
Xiaodong Zhang ◽  
Xiaolu Yi ◽  
Min Xu

Hydrogen is currently being widely regarded as a futural energy carrier to reduce carbon emissions and other NOx and SOx pollutants. Many researchers have proved that hydrogen can be efficiently used in solid oxide fuel cells -gas turbine system (SOFC-GT) and molten carbonate fuel cells-gas turbine system (MCFC-GT). Hydrogen production from biomass resources offers the advantage of providing a renewable energy carrier for extensive reduction of the CO2 emission. A secondary steam reforming process which consists of steam reforming of methane and water gas shift was proposed to further convert CH4, CO and other hydrocarbons in biomass pyrolysis gas for promoting hydrogen yield. According to respective reaction mechanism, simulating calculations were carried out in two reforming processes separately. With the favor of PRO/II, the effects of reaction temperature and steam to carbon ratio on hydrogen yield were discussed in details in the steam reforming of methane. A reasonable calculation method was established for simulating the water gas shift process in which the effects of temperature and steam to CO ratio was investigated. The simulation made good results in optimizing reaction conditions for two reformers and predicting the volume rate of all gas components. It is proved by simulation that hydrogen-rich gas with >68 mol% H2 could be produced, and the hydrogen yield could reach 48.18 mol H2/(Kg Biomass) and 45.85 mol/(Kg Biomass) respectively when using corn straw and rice husk as feedstock. The experiment data from a related reference was adopted to prove the reasonability of the simulation results which could show the feasibility of secondary steam reforming process, as well as provide good references for practical process operation.


Author(s):  
Aya Abdel-Hamid I. Mourad ◽  
◽  
N. M. Ghasem ◽  
A. Y. Alraeesi ◽  
◽  
...  

Sign in / Sign up

Export Citation Format

Share Document