scholarly journals Development of Overall Pavement Condition Index for Urban Road Network

2013 ◽  
Vol 104 ◽  
pp. 332-341 ◽  
Author(s):  
Yogesh U. Shah ◽  
S.S. Jain ◽  
Devesh Tiwari ◽  
M.K. Jain
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Sasan Adeli ◽  
Vahid Najafi moghaddam Gilani ◽  
Mohammad Kashani Novin ◽  
Ehsan Motesharei ◽  
Reza Salehfard

The main objective of this paper was to investigate the relationship between PCI and IRI values of the rural road network. To this end, 6000 pavement sections of the rural road network in Iran were selected. Road surface images and roughness linear profiles were collected using an automated car to calculate PCI and IRI, respectively. Three exponential regression models were developed and validated in three different IRI intervals. Analysis of the results indicated that exponential regression was the best model to relate IRI and PCI. In these models, R2 values were found to be acceptable, equal to 0.75, 0.76, and 0.59 for roads with good, fair, and very poor qualities, respectively, indicating a good relationship between IRI and PCI. Moreover, validation results showed that the model had a high accuracy. Also, the relation between IRI and PCI became weaker as a result of increasing the level of road surface roughness, which can be caused by the increase in the number and severity of failures. Furthermore, two failures of rail R.C. and rutting were rarely observed in the studied roads. Therefore, the proposed model is more applicable for roads without the mentioned failures and asphalt-pavement rural road network.


2019 ◽  
Vol 31 (3) ◽  
Author(s):  
Soumadeep Bagui ◽  
Swapan Kumar Bagui ◽  
Anukul Saxena

This paper presents the development of software in C++ Language for the determination of Pavement Condition Index (PCI) based on the design procedure mentioned in ASTM D 4433 and future requirement of maintenance of existing road /road network. Presently in India, Manual Pavement Condition survey has been replaced by automated Network Survey Vehicle (NSV). PCI procedure mentioned in ASTM D 4433 which needs uses of several curves and same curves have been converted in regression equations. These equations are used to prepare a Program in C++ Language. This will be useful for Pavement Engineer to determine PCI and maintenance strategy.


2018 ◽  
Vol 09 (02) ◽  
pp. 139-151
Author(s):  
Hussein Ewadh ◽  
◽  
Raid Almuhanna ◽  
Saja Alasadi ◽  
◽  
...  

Sign in / Sign up

Export Citation Format

Share Document