scholarly journals Dynamic corrosion testing of metals in solar salt for concentrated solar power

2021 ◽  
Vol 232 ◽  
pp. 111331
Author(s):  
Florian Sutter ◽  
Ceyhun Oskay ◽  
Mathias Christian Galetz ◽  
Teresa Diamantino ◽  
Fátima Pedrosa ◽  
...  
2018 ◽  
Vol 176 ◽  
pp. 357-373 ◽  
Author(s):  
Belén Muñoz-Sánchez ◽  
Javier Nieto-Maestre ◽  
Elisabetta Veca ◽  
Raffaele Liberatore ◽  
Salvatore Sau ◽  
...  

2020 ◽  
Vol 146 ◽  
pp. 384-396 ◽  
Author(s):  
Javier Nieto-Maestre ◽  
Belén Muñoz-Sánchez ◽  
Angel G. Fernández ◽  
Abdessamad Faik ◽  
Yaroslav Grosu ◽  
...  

Author(s):  
Antoni Gil ◽  
Daniel S. Codd ◽  
Lei Zhou ◽  
David Trumper ◽  
Ronald B. Campbell ◽  
...  

A new concept of Thermal Energy Storage (TES) system based on current available technologies is being developed under the framework of the Masdar Institute (MI) and Massachusetts Institute of Technology (MIT) collaborative Flagship Program. The key feature of this concept lies on concentrating sun light directly on the molten salt storage tank, avoiding the necessity of pumping the salts to the top of a tower thereby avoiding thermal losses and pumping and electric tracing needs inherent in most conventional CSP plants. This Concentrated Solar Power on Demand (CSPonD) volumetric receiver/TES unit prototype will be tested in the existing MI heliostat field and beam down tower in Abu Dhabi (UAE) which will collect and redirect solar energy to an upwards-facing final optical element (FOE). These energy will be concentrated on the aperture of the prototype designed to store 400 kWh of energy allowing 16 hours of continuous production after sunset using Solar Salt (60%NaNO3 + 40%KNO3) as storage material. The tank is divided in two volumes: one cold in the bottom region, where Solar Salt is at 250 °C and another hot on the upper region, at 550 °C. A moving divider plate with active control separates both volumes. The plate includes mixing enhancement features to help with convection on the hot volume of salts. It’s expected that results will demonstrate the technical feasibility and economic viability of this concept allowing its scale up at commercial size.


Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 467 ◽  
Author(s):  
Xin Xiao ◽  
Gan Zhang ◽  
Yulong Ding ◽  
Dongsheng Wen

HITEC salt (NaNO2-NaO3-KNO3) and solar salt (NaO3-KNO3) are typical molten salts used in concentrated solar power. Adding nanoparticles is an effective method to improve the thermo-physical properties of pure salt. It is indispensable to experimentally study the rheological behaviours of salt seeded with nanoparticles, which can increase the specific heat capacity of pure salt. In this work, the viscosities of HITEC salt were measured with different shear rates in the temperature range of 200 °C to 450 °C firstly, while those of solar salt were measured in the temperature range of 250 °C to 500 °C. The experimental data showed reasonable agreement with the literature correlations, which verify the Newtonian behaviours of pure salts. The evolutions of the viscosities of nanocomposites in the same temperature range were measured and analysed, where the nanocomposites were synthesized with 1 wt.% or 2 wt.% Al2O3 nanopowder and graphene, respectively. Results showed that the addition of Al2O3 nanopowder had relatively little effect on viscosity, and the variations were about −35.4%~8.1% for the HITEC salt nanocomposites and −9.2%~68.1% for the solar salt nanocomposites. While graphene would apparently increase the viscosities of HITEC salt and solar salt, HITEC salt with the addition of graphene showed slight non-Newtonian fluid behaviour.


2017 ◽  
Vol 8 (4) ◽  
pp. 1-19
Author(s):  
Oliveira Helio Marques de ◽  
◽  
Giacaglia Giorgio Eugenio Oscare ◽  

Sign in / Sign up

Export Citation Format

Share Document