Surface Coating on Aluminum Substrate with Polymeric Guanidine Derivative to Protect Jet fuel Tanks from Microbial Contamination

Author(s):  
Jie Zhang ◽  
Hao Luo ◽  
Xueqian Yin ◽  
Yidong Shi ◽  
Yong Zhang ◽  
...  
Author(s):  
Floyd A. Wyczalek

Abstract The specific mission was to identify the conditions of atmospheric pressure and ambient temperature under which a so-called empty-Boeing model 747-131 fixed wing jet aircraft center wing tank (CWT), containing a residual fuel loading of about 3 kg/m3, less than 100 gallons of aviation kerosene (JetA Athens refinery commercial jet fuel), could form hazardous air/fuel mixtures. The issues are limited to explosion safety concerns relating to certificated fixed wing jet aircraft in regularly scheduled commercial passenger service. It is certain that a combustible mixture does not exist in a fuel tank containing Jet-A type fuel at ambient temperatures below 38°C (100°F), which is the lean limit flash point (LFP) for commercial jet fuel at sea level. Never the less, although not included in this paper, the original study reported by Wyczalek and Suh (1997), identified six highly unlikely, but rationally possible critical conditions which can occur in a combination which may permit a combustible mixture to exist within a jet aircraft fuel tank and pose a potential hazard. The scope of this paper is limited to mathematical modeling concerns related to fixed wing jet aircraft fuel tanks and commercial jet fuels combustible air-fuel mixture ratios. It was further limited to a historical review of the scientific literature in the public domain from 1950 to the present time, which defined the thermodynamic and minimum ignition energy properties of aviation gasoline and commercial jet fuels; and, to comparisons with new thermodynamic data for JetA Athens flight test samples, released by the National Transportation Safety Board (NTSB) during public hearings on the TWA800 event in Baltimore, Maryland in December 1997. The original work reported by Wyczalek and Suh (1997) conclusively demonstrated that the USAF Wright Air Development Center and the US Bureau of Mines conducted and published comprehensive evaluations of the potential hazards relating to jet aircraft fuel tanks as early as 1952. This historical scientific data and the mathematical models for the new jetA and Athens refinery jetA in this paper, are relevant to pending TWA800 related litigation, and to the future implementation of NTSB recommendations resulting from the TWA800 event.


2005 ◽  
Vol 33 (1) ◽  
pp. 29-36 ◽  
Author(s):  
Michelle E. Rauch ◽  
Harold W. Graef ◽  
Sophie M. Rozenzhak ◽  
Sharon E. Jones ◽  
Charles A. Bleckmann ◽  
...  

2017 ◽  
Vol 60 (1) ◽  
pp. 110-115 ◽  
Author(s):  
S. A. Borminskii ◽  
A. V. Parshina ◽  
B. V. Skvortsov

2019 ◽  
Vol 65 (2) ◽  
pp. 371-380
Author(s):  
Dong Hu ◽  
Jie Zeng ◽  
Shangshu Wu ◽  
Xi Li ◽  
Chengsong Ye ◽  
...  

BioScience ◽  
1964 ◽  
Vol 14 (1) ◽  
pp. 23-25 ◽  
Author(s):  
Dennis J. Becker ◽  
Edward A. Calvelli

2008 ◽  
Vol 38 ◽  
pp. 257-268 ◽  
Author(s):  
Edward C. Hill ◽  
Graham C. Hill

Microbial contamination and growth in distillate fuels has been described for seventy years. The consequences have ranged from fouling of filters and injectors, to engine malfunction and damage, fuel gauge malfunctions and aggravated corrosion of engines, fuel tanks, equipment and facilities. The types of microbes present vary with the differences in fuel composition and differences in storage and use conditions. Anti-microbial strategies have traditionally included prevention by ‘good housekeeping’ and ‘fire-brigade’ applications of biocides when there are operational problems. Since 2002, first the aviation industry and later fuel suppliers and some militaries, have used simple on-site microbiological tests to monitor fuel and fuel systems and use the results to take remedial actions before operational problems occur. This paper will review our latest knowledge of microbially influenced corrosion and of the new anti-microbial strategies which are being successfully implemented to prevent it.


2019 ◽  
pp. 138-152 ◽  
Author(s):  
Gail M. Weaver ◽  
Nadia Smith ◽  
Emily B. Berndt ◽  
Kristopher D. White ◽  
John F. Dostalek ◽  
...  

At high latitudes in winter, the atmosphere at flight levels used by passenger and cargo aircraft can reach temperatures cold enough to restrict the flow of jet fuel from the fuel tanks to the engine, due either to water freezing in the fuel or the fuel itself freezing. Currently, aviation forecasters rely on a combination of aircraft reports, pilot reports, a sparse network of radiosondes, and global model fieldsfor identifying and characterizing Cold Air Aloft (CAA) events. More atmospheric data are needed to improve forecasts of CAA placement and timing, and satellite observations can help fill the gap. In particular, products derived from the NOAA-Unique Combined Atmospheric Processing System (NUCAPS) can be utilized by National Weather Service (NWS) forecasters to assist in the production of aviation hazard products. NUCAPS combines measurements from infrared and microwave sounding instruments on polar-orbiting satellites to retrieve atmospheric profiles of temperature and moisture in the high latitudes. NWS forecasters have real-time access to NUCAPS soundings via the Advanced Weather Interactive Processing System-II (AWIPS-II). The Joint Polar Satellite System Sounding Applications Initiative created Gridded NUCAPS in order to view soundings as isobaric surfaces or vertical cross sections in AWIPS-II. The Cooperative Institute for Research in the Atmosphere (CIRA) developed a web-based product for displaying satellite-derived CAA information. This paper describes how the AWIPS-II and CIRA displays of satellite sounding observations augment aviation forecasting activities in Alaska using two specific CAA cases from the 2016–2017 and 2017–2018 winter seasons.


Sign in / Sign up

Export Citation Format

Share Document