In situ corrosion of canister materials in bentonite: the IC-A experiment at Mont Terri

Since 2012, a long-term in situ corrosion experiment (IC-A) has been conducted in the Mont Terri Underground Research Laboratory in Switzerland. The aims of the project with international partners are to confirm the long-term anaerobic corrosion rate of carbon steel and copper in compacted bentonite under repository-relevant environmental conditions, to gather in situ corrosion data supporting canister lifetime predictions, to provide confirmation of the effect of the bentonite buffer on microbial activity and microbially influenced corrosion, and to study the effects of welding (steel) and deposition technique (copper) on the corrosion properties of these candidate materials for disposal canisters. To date, carbon steel and cold sprayed and electrodeposited copper coatings have been retrieved after different exposure periods up to 3 years and characterised to establish the composition of the corrosion product, the morphology of the corroded surface, and to measure the rate of corrosion. For carbon steel specimens, a complex corrosion product was identified, consisting predominantly of magnetite. Low average anaerobic corrosion rates were measured for carbon steel and a very modest amount of alteration was identified on copper. The density and the initial form of the bentonite had a small influence on the rate of corrosion, across all materials.

Sulfidogenic Microbial Communities of the Uzen High-Temperature Oil Field in Kazakhstan

Application of seawater for secondary oil recovery stimulates the development of sulfidogenic bacteria in the oil field leading to microbially influenced corrosion of steel equipment, oil souring, and environmental issues. The aim of this work was to investigate potential sulfide producers in the high-temperature Uzen oil field (Republic of Kazakhstan) exploited with seawater flooding and the possibility of suppressing growth of sulfidogens in both planktonic and biofilm forms. Approaches used in the study included 16S rRNA and dsrAB gene sequencing, scanning electron microscopy, and culture-based techniques. Thermophilic hydrogenotrophic methanogens of the genus Methanothermococcus (phylum Euryarchaeota) predominated in water from the zone not affected by seawater flooding. Methanogens were accompanied by fermentative bacteria of the genera Thermovirga, Defliviitoga, Geotoga, and Thermosipho (phylum Thermotogae), which are potential thiosulfate- or/and sulfur-reducers. In the sulfate- and sulfide-rich formation water, the share of Desulfonauticus sulfate-reducing bacteria (SRB) increased. Thermodesulforhabdus, Thermodesulfobacterium, Desulfotomaculum, Desulfovibrio, and Desulfoglaeba were also detected. Mesophilic denitrifying bacteria of the genera Marinobacter, Halomonas, and Pelobacter inhabited the near-bottom zone of injection wells. Nitrate did not suppress sulfidogenesis in mesophilic enrichments because denitrifiers reduced nitrate to dinitrogen; however, thermophilic denitrifiers produced nitrite, an inhibitor of SRB. Enrichments and a pure culture Desulfovibrio alaskensis Kaz19 formed biofilms highly resistant to biocides. Our results suggest that seawater injection and temperature of the environment determine the composition and functional activity of prokaryotes in the Uzen oil field.

A Brief Insight into Microbial Corrosion and its Mitigation with Eco-friendly Inhibitors

Corrosion results from the electrochemical reactions between the metal and its existing environment. Corrosion results in severe and expensive damage to a wide spectrum of industries. When microbes are involved in corrosion it is seldom possible to economically evaluate its impact. Microbially influenced corrosion is recognized to cause catastrophic failures contributing to approximately 20% of the annual losses. In many engineering applications, microbially influenced corrosion control is of prime importance. Expensive, toxicity and sometimes, even ineffectiveness of the current chemical strategies to mitigate microbially influenced corrosion have shifted the interest towards eco-friendly inhibitors. The present review discusses microbial induced corrosion in various metals and its inhibition through eco-friendly inhibitors. In addition, the study also reviews the morphological and electrochemical impedance results.

High taxonomic diversity in ship bilges presents challenges for monitoring microbial corrosion and opportunity to utilise community functional profiling

One of the key areas in which microbially influenced corrosion (MIC) has been found to be a problem is in the bilges of maritime vessels. To establish effective biological monitoring protocols, baseline knowledge of the temporal and spatial biological variation within bilges, as well as the effectiveness of different sampling methodologies, is critical. We used 16S rRNA gene metabarcoding of pelagic and sessile bacterial communities from ship bilges to assess the variation in bilge bacterial communities to determine how the inherent bilge diversity could guide or constrain biological monitoring. Bilge communities exhibited high levels of spatial and temporal variation with >80% of the community able to be turned over in the space of 3 months, likely due to disturbance events such as cleaning and maintenance. Sessile and pelagic communities within a given bilge were also inherently distinct, with dominant ESVs rarely shared between the two. Taxa containing KOs associated with dissimilatory sulfate reduction and biofilm production, functions typically associated with MIC, were generally more prevalent in sessile communities. Collectively our findings indicate neither bilge water nor an unaffected bilge from within the same vessel would constitute an appropriate reference community for MIC diagnosis. Optimal sampling locations and strategies that could be incorporated into a standardised method for monitoring bilge biology in relation to MIC were identified. Finally, taxonomic and functional comparisons of bilge diversity highlight the potential of functional approaches in future biological monitoring of MIC and MIC mitigation strategies in general. Importance Microbially influenced corrosion (MIC) has been estimated to contribute 20 - 50% of the costs associated with corrosion globally. Diagnosis and monitoring of MIC is a complex problem requiring knowledge of corrosion rates, corrosion morphology and the associated microbiology to distinguish MIC from abiotic corrosion processes. Historically, biological monitoring of MIC utilised a priori knowledge to monitor sulfate reducing bacteria, however it is becoming widely accepted that a holistic or community-level understanding of corrosion-associated microbiology is needed for MIC diagnosis and monitoring. Before biology associated with MIC attack can be identified, standardised protocols for sampling and monitoring must be developed. The significance of our research is in contributing to the development of robust and repeatable sampling strategies of bilges, which are required for the development of standardised biological monitoring methods for MIC. We achieve this via a biodiversity survey of bilge communities and by comparing taxonomic and functional variation.

Nitrite as a causal factor for nitrate-dependent anaerobic corrosion of metallic iron induced by Prolixibacter strains

Microbially influenced corrosion (MIC) may contribute significantly to overall corrosion risks, especially in the gas and petroleum industries. In this study, we isolated four Prolixibacter strains, which belong to the phylum Bacteroidetes, and examined their nitrate-respiration- and Fe0-corroding activities, together with two previously isolated Prolixibacter strains. Four of the six Prolixibacter strains reduced nitrate under anaerobic conditions, while the other two strains did not. The anaerobic growth of the four nitrate-reducing strains was enhanced by nitrate, which was not observed in the two nitrate-non-reducing strains. When the nitrate-reducing strains were grown anaerobically in the presence of Fe0 or carbon steel, the corrosion of the materials was enhanced by more than 20-fold compared to that in aseptic controls. This enhancement was not observed in cultures of the nitrate-non-reducing strains. The oxidation of Fe0 in the anaerobic cultures of nitrate-reducing strains occurred concomitantly with the reduction of nitrite. Since nitrite chemically oxidized Fe0 under anaerobic and aseptic conditions, the corrosion of Fe0- and carbon-steel by the nitrate-reducing Prolixibacter strains was deduced to be mainly enhanced via the biological reduction of nitrate to nitrite, followed by the chemical oxidation of Fe0 to Fe2+ and Fe3+ coupled to the reduction of nitrite.

Effect of Multispecies Microbial Consortia on Microbially Influenced Corrosion of Carbon Steel

Microbially influenced corrosion (MIC) is responsible for significant damage to major marine infrastructure worldwide. While the microbes responsible for MIC typically exist in the environment in a synergistic combination of different species, the vast majority of laboratory-based MIC experiments are performed with single microbial pure cultures. In this work, marine grade steel was exposed to a single sulfate reducing bacterium (SRB, Desulfovibrio desulfuricans) and various combinations of bacteria (both pure cultures and mixed communities), and the steel corrosion studied. Differences in the microbial biofilm composition and succession, steel weight loss and pitting attack were observed for the various test configurations studied. The sulfate reduction phenotype was successfully shown in half-strength marine broth for both single and mixed communities. The highest corrosion according to steel weight loss and pitting, was recorded in the tests with D. desulfuricans alone when incubated in a nominally aerobic environment. The multispecies microbial consortia yielded lower general corrosion rates compared to D. desulfuricans or for the uninoculated control.