Free-base nicotine in tobacco products. Part I. Determination of free-base nicotine in the particulate phase of mainstream cigarette smoke and the relevance of these findings to product design parameters

2010 ◽  
Vol 58 (1) ◽  
pp. 45-63 ◽  
Author(s):  
J.H. Lauterbach ◽  
M. Bao ◽  
P.J. Joza ◽  
W.S. Rickert
Author(s):  
RL McDaniel ◽  
KM Torrence ◽  
DA Self ◽  
MJ Chang

AbstractA method for differentiation of gas- and particulate-phase mercury in mainstream cigarette smoke was developed using electrostatic precipitation (EP) as the trap for the particulate phase and impingers containing acidic potassium permanganate solution as the trap for the gas-phase portion. The mercury collected from the gas phase was analyzed by conventional cold vapor atomic absorption spectrometry (CVAAS) and the particulate phase was analyzed by gold amalgamation CVAAS. Cigarettes were smoked under two smoking regimes, FTC (35-mL puff volume, 2 s puff duration and one puff every 60 s) and an alternative (45-mL puff volume, 2 s puff duration, one puff every 30 s and 50% of any ventilation holes blocked) currently recommended by the Massachusetts Department of Health. For the 1R4F reference cigarette smoked under the FTC smoking regime, the mercury found in the particulate phase was less than 0.2 ng/cig, compared with 4.9 ng/cig in the gas phase. By changing smoking parameters, the mercury concentration in mainstream smoke was found to change proportional to the delivery of cigarette smoke condensate (CSC) for the same type of cigarette. However, the mercury level for different types of cigarettes smoked under the same smoking parameters had no linear relationship with CSC delivery. Spiked recovery was 98% AA± 8% for gas-phase mercury and 97% AA± 2% for the particulate phase. These results indicate that the analytical method developed is suitable for the determination of mercury in mainstream smoke. For routine analytical work in a smoking laboratory, only the gas phase needs to be analyzed for determination of mercury in mainstream smoke because the amount of mercury in the particulate phase is negligible.


2011 ◽  
Vol 26 (8) ◽  
pp. 1633 ◽  
Author(s):  
Sutthinun Taebunpakul ◽  
Chuan Liu ◽  
Christopher Wright ◽  
Kevin McAdam ◽  
Julien Heroult ◽  
...  

2011 ◽  
Vol 58 (5) ◽  
pp. 667-672 ◽  
Author(s):  
Yu Ding ◽  
Jun Yang ◽  
Wen-Jing Zhu ◽  
Cheng-Hui Wang ◽  
Dong-Liang Zhu ◽  
...  

Author(s):  
P.F. Collins ◽  
N.M. Sarji ◽  
J.F. Williams

AbstractA procedure for the combined determination of total HCN and total gas phase aldehydes in cigarette smoke has been developed which is practical to use for the analysis of relatively large cigarette samples. The smoking system includes a Cambridge pad for collection of the particulate phase and a small tube of silica gel to trap gas phase components, with 5 cigarettes being smoked through each pad and trap. Following smoking, the Cambridge pad and silica gel trap are extracted; the silica gel extract is used for the determination of total gas phase aldehydes and the combined extracts for HCN analysis. Colourimetric procedures, automated through use of the Technicon AutoAnalyser as described previously, are employed for the analysis of the sample extracts. Evaluation of this combined procedure indicates that it yields reliable results for both total HCN and total gas phase aldehydes with greater speed and ease of operation than provided by the previously described methods. The procedure has been applied to various cigarette samples with the relative standard deviation for a single port of 5 cigarettes ranging from 1.9 to 5.5 % for gas phase aldehydes and from 2.6 to 8.4 % for total HCN.


Sign in / Sign up

Export Citation Format

Share Document