Natural convection in vertically and horizontally layered porous media heated from the side

1983 ◽  
Vol 26 (12) ◽  
pp. 1805-1814 ◽  
Author(s):  
D. Poulikakos ◽  
A. Bejan
2021 ◽  
Author(s):  
Ekaterina Kolchanova ◽  
Nikolay Kolchanov

<p>We study convective instability in the vertically layered porous media saturated with mixture. The mixture consists of a carrier fluid and solid nanoparticles. The nanoparticles are considered as solute within the continuous approach. The porous media are two horizontal sublayers with different permeabilities. The solute concentration is maximal near the upper boundary and is zero near the lower boundary of the superposed sublayers. Thus, one has suitable conditions for the onset of solutal convection in the gravitational field.</p><p>The porous sublayers are reactive media, which can absorb nanoparticles. The mixture transport here is accompanied by immobilization. It is described by the mobile/immobile media model. The mobile phase is carried by fluid flow, while the immobile phase is absorbed by porous matrix. The linear kinetic equation for the mixture redistribution between the phases is applied. The Boussinesq approximation is used in the equations for convection in each of the sublayers. Numerical simulation is performed by the shooting method.</p><p>We apply a linear stability theory to find the threshold Rayleigh-Darcy number for the onset of solutal convection. This similarity criterion is determined through the average permeability and porosity of uncontaminated porous sublayers. For the first time, we introduce a solutal pore shrinkage coefficient, which is analogous to the thermal expansion coefficient for thermal natural convection. This coefficient shows that porosity decreases as the concentration of immobile phase grows in the presence of sorption. Particles in this case join the surface of pores and shrink the void space.</p><p>Firstly, we find the permeability ratios for bimodal marginal stability curves in the uncontaminated sublayers. Here, the sublayer permeabilities differ by approximately 100 times. The bimodal curves demonstrate the competition between two convective instabilities. One of them is for the local convective rolls that generate within the more permeable layer and the other is for the large-scale rolls penetrating both layers. The rolls are similar to thermal natural convection in the multi-layered porous media studied by McKibbin and O'Sullivan (1980). For sorbing porous media, the type of convective rolls strongly depends on the solutal pore shrinkage coefficient. Even a small change in its value can produce a large variation of flow streamlines from the convective rolls localized within the upper highly permeable sublayer to the rolls covering both the upper and lower sublayers. The observed sorption effect on the transition from local to large-scale convection is due to the fact that the permeability ratio depends on the solutal pore shrinkage coefficient. It is also found that sorption effect delays the onset of solutal convection.</p><p>The work was supported by the Russian Science Foundation (Grant No. 20-11-20125).</p>


2011 ◽  
Vol 14 (9) ◽  
pp. 761-776 ◽  
Author(s):  
Hamid Emami Meybodi ◽  
Riyaz Kharrat ◽  
Benyamin Yadali Jamaloei

2021 ◽  
Vol 11 (8) ◽  
pp. 3421
Author(s):  
Cheng-Yu Ku ◽  
Li-Dan Hong ◽  
Chih-Yu Liu ◽  
Jing-En Xiao ◽  
Wei-Po Huang

In this study, we developed a novel boundary-type meshless approach for dealing with two-dimensional transient flows in heterogeneous layered porous media. The novelty of the proposed method is that we derived the Trefftz space–time basis function for the two-dimensional diffusion equation in layered porous media in the space–time domain. The continuity conditions at the interface of the subdomains were satisfied in terms of the domain decomposition method. Numerical solutions were approximated based on the superposition principle utilizing the space–time basis functions of the governing equation. Using the space–time collocation scheme, the numerical solutions of the problem were solved with boundary and initial data assigned on the space–time boundaries, which combined spatial and temporal discretizations in the space–time manifold. Accordingly, the transient flows through the heterogeneous layered porous media in the space–time domain could be solved without using a time-marching scheme. Numerical examples and a convergence analysis were carried out to validate the accuracy and the stability of the method. The results illustrate that an excellent agreement with the analytical solution was obtained. Additionally, the proposed method was relatively simple because we only needed to deal with the boundary data, even for the problems in the heterogeneous layered porous media. Finally, when compared with the conventional time-marching scheme, highly accurate solutions were obtained and the error accumulation from the time-marching scheme was avoided.


Sign in / Sign up

Export Citation Format

Share Document