AbstractOur aim was to assess the regional right ventricular (RV) shape changes in pressure and volume overload conditions and their relations with RV function and mechanics. The end-diastolic and end-systolic RV endocardial surfaces were analyzed with three-dimensional echocardiography (3DE) in 33 patients with RV volume overload (rToF), 31 patients with RV pressure overload (PH), and 60 controls. The mean curvature of the RV inflow (RVIT) and outflow (RVOT) tracts, RV apex and body (both divided into free wall (FW) and septum) were measured. Zero curvature defined a flat surface, whereas positive or negative curvature indicated convexity or concavity, respectively. The longitudinal and radial RV wall motions were also obtained. rToF and PH patients had flatter FW (body and apex) and RVIT, more convex interventricular septum (body and apex) and RVOT than controls. rToF demonstrated a less bulging interventricular septum at end-systole than PH patients, resulting in a more convex shape of the RVFW (r = − 0.701, p < 0.0001), and worse RV longitudinal contraction (r = − 0.397, p = 0.02). PH patients showed flatter RVFW apex at end-systole compared to rToF (p < 0.01). In both groups, a flatter RVFW apex was associated with worse radial RV contraction (r = 0.362 in rToF, r = 0.482 in PH at end-diastole, and r = 0.555 in rToF, r = 0.379 in PH at end-systole, respectively). In PH group, the impairment of radial contraction was also related to flatter RVIT (r = 0.407) and more convex RVOT (r = − 0.525) at end-systole (p < 0.05). In conclusion, different loading conditions are associated to specific RV curvature changes, that are related to longitudinal and radial RV dysfunction.
Structural abnormalities defined by three-dimensional echocardiography in patients with right ventricular tachycardia
