Finite element analysis of the contact mechanics of ceramic-on-ceramic hip resurfacing prostheses

2010 ◽  
Vol 7 (3) ◽  
pp. 244-253 ◽  
Author(s):  
Ahmet C. Cilingir
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Contact Mechanics ◽  
Hip Resurfacing ◽  
Element Analysis ◽  
Ceramic On Ceramic

Mechanical Behaviour of Auxetic Microstructures Using Contact Mechanics and Elastoplasticity

2016 ◽  
Vol 681 ◽  
pp. 100-116
Author(s):  
Georgios A. Drosopoulos ◽  
Nikolaos Kaminakis ◽  
Nikoletta Papadogianni ◽  
Georgios E. Stavroulakis
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Contact Mechanics ◽  
Compliant Mechanisms ◽  
Nonlinear Finite Element Analysis ◽  
Nonlinear Finite Element ◽  
Numerical Homogenization ◽  
Element Analysis ◽  
Optimization Formulation

The design of novel mechanical microstructures having auxetic behaviour is proposed in this paper using techniques of topology optimization for compliant mechanisms. The resulting microstructure can be modified in order to cover additional needs, not included in the topology optimization formulation. Classical structural optimization, contact mechanics, homogenization and nonlinear finite element analysis are used for this step. Thus, the modified microstructure or composite is studied with numerical homogenization in order to verify that it still has the wished auxetic behaviour. Finally, nonlinear finite element analysis shows how the auxetic behaviour is influenced by unilateral contact between the constituent materials, large displacements and elastoplasticity.

THE EFFECT OF ASPHERICITY OF ACETABULAR BEARING SURFACE ON CONTACT MECHANICS OF UHMWPE TOTAL HIP IMPLANTS BY FINITE ELEMENT ANALYSIS

2017 ◽  
Vol 17 (01) ◽  
pp. 1750011 ◽  
Author(s):  
XUAN ZHANG ◽  
LING WANG ◽  
XIFENG PENG ◽  
DICHEN LI ◽  
JIANKANG HE ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Contact Mechanics ◽  
Contact Pressure ◽  
Surface Profile ◽  
Surface Measurement ◽  
Element Analysis ◽  
Actual Surface ◽  
Total Hip ◽  
Measuring Machine

Asphericity and out-of-roundness are generally used to evaluate the manufacturing quality of ultra-high molecular weight polyethylene (UHMWPE) cup inner surfaces, which can potentially affect initial clinical wear and contribute to osteolysis of total hip arthroplasty. This study measured the location and magnitude of asphericity and the out-of-roundness value for four UHMWPE cups in a single set, and then investigated the effects of the asphericity on the contact mechanics of UHMWPE cups. A co-ordinate measuring machine (CMM) was used for the surface measurement and finite element analysis (FEA) was adopted for contact mechanics study. The results demonstrated that the asphericity varied between cups with the maximum value as 0.088[Formula: see text][Formula: see text][Formula: see text]0.004[Formula: see text]mm. Although such a value met the ISO specification, large difference of volume appeared for the asphericity above 0.060[Formula: see text]mm. Actual surface profile accounting for the asphericity was found to affect the value of contact pressure and contact area by around 12%. The inferior asphericity resulted in a nonsmoothly distributed contact pressure, which had a negative effect on the contact mechanics of UHMWPE cups and the edge loading was predicted to occur for the sample with a large asphericity. In conclusion, the asphericity of UHMWPE cup could affect the contact mechanics of the articular bearings and may subsequently contribute to initial wear during bedding-in phase.

The Effect of Cusp Contact in the Meshing Process for Internal Gear Pairs with few Teeth Difference

2013 ◽  
Vol 367 ◽  
pp. 63-67
Author(s):  
Yan Gang Wei ◽  
Jing Zhao
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Contact Mechanics ◽  
Simulation Analysis ◽  
Element Analysis ◽  
Internal Gear ◽  
Gear Engagement ◽  
Meshing Process ◽  
Element Method

The model of finite element analysis is established reasonably through combining the principle of gear engagement, contact mechanics, and finite element concept and method. Simulation analysis is made for the meshing process of the internal gear pairs with few teeth difference using finite element method. It is found out that the effect of cusp contact along the direction of tooth depth will be generated in the meshing process of the internal gear pairs with few teeth difference when studying the multi-teeth contact. The complexity of multi-teeth meshing effect and the effect of the effect of cusp contact during the meshing process is pointed out.

A Biomechanical and Finite Element Analysis of Femoral Neck Notching During Hip Resurfacing

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Edward T. Davis ◽  
Michael Olsen ◽  
Rad Zdero ◽  
Marcello Papini ◽  
James P. Waddell ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Femoral Neck ◽  
Finite Element Model ◽  
Proximal Femur ◽  
Equivalent Stress ◽  
Element Model ◽  
Hip Resurfacing ◽  
Stress And Strain ◽  
Element Analysis

Hip resurfacing is an alternative to total hip arthroplasty in which the femoral head surface is replaced with a metallic shell, thus preserving most of the proximal femoral bone stock. Accidental notching of the femoral neck during the procedure may predispose it to fracture. We examined the effect of neck notching on the strength of the proximal femur. Six composite femurs were prepared without a superior femoral neck notch, six were prepared in an inferiorly translated position to create a 2 mm notch, and six were prepared with a 5 mm notch. Six intact synthetic femurs were also tested. The samples were loaded to failure axially. A finite element model of a composite femur with increasing superior notch depths computed maximum equivalent stress and strain distributions. Experimental results showed that resurfaced synthetic femurs were significantly weaker than intact femurs (mean failure of 7034 N, p<0.001). The 2 mm notched group (mean failure of 4034 N) was significantly weaker than the un-notched group (mean failure of 5302 N, p=0.018). The 5 mm notched group (mean failure of 2808 N) was also significantly weaker than both the un-notched and the 2 mm notched groups (p<0.001, p=0.023, respectively). The finite element model showed the maximum equivalent strain in the superior reamed cancellous bone increasing with corresponding notch size. Fracture patterns inferred from equivalent stress distributions were consistent with those obtained from mechanical testing. A superior notch of 2 mm weakened the proximal femur by 24%, and a 5 mm notch weakened it by 47%. The finite element analysis substantiates this showing increasing stress and strain distributions within the prepared femoral neck with increasing notch depth.

Mechanical and numerical characterization of ceramic femoral components for hip resurfacing arthroplasty

2019 ◽  
Vol 233 (9) ◽  
pp. 883-891 ◽  
Author(s):  
Danny Vogel ◽  
Martin Liebelt ◽  
Florian Kalkowsky ◽  
Thomas Oberbach ◽  
Daniel Delfosse ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Femoral Component ◽  
Hip Resurfacing ◽  
Fracture Load ◽  
Element Analysis ◽  
Hip Resurfacing Arthroplasty ◽  
Resurfacing Arthroplasty ◽  
The Finite Element Analysis ◽  
Copper Ring

Hip resurfacing arthroplasty may have distinct advantages for young and active patients, but large metal-on-metal bearings can be associated with increased wear, adverse tissue reactions and higher rate of implant loosening. Ceramic wear couples are a commonly used alternative to metals and therefore might be an alternative for hip resurfacing arthroplastys. The aim of this study was to evaluate the mechanical strength of femoral components made of an alumina-toughened zirconia composite by means of experimental testing and finite element analysis. For the mechanical characterization, ceramic femoral components (Ø: 48 mm) were tested under compression loading experimentally until fracture occurred or a maximum load of 85 kN was obtained. The femoral components were either loaded against a ceramic cup or a copper ring (outer diameter Ø: 7.0 mm). In addition, the complex geometry of the ceramic femoral component was simplified, and only the stem was loaded in a cantilever test until fracture. In addition, the fracture tests were numerically simulated to investigate the influence of additional loading conditions and geometric parameters, which were not experimentally tested. The experimental data were used for validation of the finite element analysis. None of the tested ceramic femoral components fractured at a compression load of 85 kN when they were loaded against a ceramic cup at an inclination angle of 45°. When the femoral components were loaded against a copper ring, the femoral components fractured at 29.9 kN at a testing angle of 45°. The fracture load was reduced when an angle of 30° and increased when an angle of 60° was simulated. Using an experimental cantilever test, the stem of the femoral component fractured at 1124.0 N. When the stem length was increased or the diameter was reduced by 10% in the finite element analysis, the fracture load was reduced. Decreasing the length or increasing the diameter led to an increase of the fracture load. The strongest influence was found for the reduction of the transition radius of the stem, with a decrease of the fracture load up to 27.2%. The analyzed femoral components made of alumina-toughened zirconia (ATZ) showed sufficient mechanical capability to withstand high loadings during unfavorable loading conditions. However, further biomechanical and tribological investigations are required before clinical application.

Sign in / Sign up

Export Citation Format

Share Document