Large-scale structures in a forced turbulent mixing layer

1985 ◽  
Vol 150 ◽  
pp. 23-39 ◽  
Author(s):  
M. Gaster ◽  
E. Kit ◽  
I. Wygnanski
Keyword(s):  
Turbulent Mixing ◽  
Large Scale ◽  
Phase Distribution ◽  
Mixing Layer ◽  
Global Scale ◽  
Travelling Wave ◽  
Mean Flow ◽  
Turbulent Mixing Layer ◽  
Large Scale Structures ◽  
Scale Structures

The large-scale structures that occur in a forced turbulent mixing layer at moderately high Reynolds numbers have been modelled by linear inviscid stability theory incorporating first-order corrections for slow spatial variations of the mean flow. The perturbation stream function for a spatially growing time-periodic travelling wave has been numerically evaluated for the measured linearly diverging mean flow. In an accompanying experiment periodic oscillations were imposed on the turbulent mixing layer by the motion of a small flap at the trailing edge of the splitter plate that separated the two uniform streams of different velocity. The results of the numerical computations are compared with experimental measurements.When the comparison between experimental data and the computational model was made on a purely local basis, agreement in both the amplitude and phase distribution across the mixing layer was excellent. Comparisons on a global scale revealed, not unexpectedly, less good accuracy in predicting the overall amplification.

Effects of heat release on the large-scale structure in turbulent mixing layers

1989 ◽  
Vol 199 ◽  
pp. 297-332 ◽  
Author(s):  
P. A. Mcmurtry ◽  
J. J. Riley ◽  
R. W. Metcalfe
Keyword(s):  
Heat Release ◽  
Turbulent Mixing ◽  
Large Scale ◽  
Mixing Layer ◽  
Large Scale Structure ◽  
Scale Structure ◽  
Mixing Layers ◽  
Turbulent Mixing Layer ◽  
Large Scale Structures ◽  
Scale Structures

The effects of chemical heat release on the large-scale structure in a chemically reacting, turbulent mixing layer are investigated using direct numerical simulations. Three-dimensional, time-dependent simulations are performed for a binary, single-step chemical reaction occurring across a temporally developing turbulent mixing layer. It is found that moderate heat release slows the development of the large-scale structures and shifts their wavelengths to larger scales. The resulting entrainment of reactants is reduced, decreasing the overall chemical product formation rate. The simulation results are interpreted in terms of turbulence energetics, vorticity dynamics, and stability theory. The baroclinic torque and thermal expansion in the mixing layer produce changes in the flame vortex structure that result in more diffuse vortices than in the constant-density case, resulting in lower rotation rates of the large-scale structures. Previously unexplained anomalies observed in the mean velocity profiles of reacting jets and mixing layers are shown to result from vorticity generation by baroclinic torques.

scholarly journals Characteristics of Large-Scale Structures in Supersonic Planar Mixing Layer with Finite Thickness

2014 ◽  
Vol 6 ◽  
pp. 878679
Author(s):  
Hailong Zhang ◽  
Jiping Wu ◽  
Jian Chen ◽  
Weidong Liu
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Finite Thickness ◽  
Mixing Layer ◽  
Mixing Enhancement ◽  
Laser Scattering ◽  
Large Scale Structures ◽  
Eddy Simulation ◽  
Planar Laser ◽  
Scale Structures

Nanoparticle-based planar laser scattering (NPLS) experiments and large eddy simulation (LES) were launched to get the fine structure of the supersonic planar mixing layer with finite thickness in the present study. Different from the turbulent development of supersonic planar mixing layer with thin thickness, the development of supersonic planar mixing layer with finite thickness is rapidly. The large-scale structures of mixing layer that possess the characters of quick movement and slow changes transmit to downriver at invariable speed. The transverse results show that the mixing layer is strip of right and dim and possess 3D characteristics. Meanwhile the vortices roll up from two sides to the center. Results indicate that the higher the pressure of the high speed side is, the thicker the mixing layer is. The development of mixing layer is restrained when the pressure of lower speed side is higher. The momentum thickness goes higher with the increase of the clapboard thickness. Through increasing the temperature to change the compression can affect the development of the vortices. The present study can make a contribution to the mixing enhancement and provide initial data for the later investigations.

scholarly journals Examination of large-scale structures in a turbulent plane mixing layer. Part 2. Dynamical systems model

2001 ◽  
Vol 441 ◽  
pp. 67-108 ◽  
Author(s):  
L. UKEILEY ◽  
L. CORDIER ◽  
R. MANCEAU ◽  
J. DELVILLE ◽  
M. GLAUSER ◽  
...  
Keyword(s):  
Dynamical System ◽  
Velocity Field ◽  
Large Scale ◽  
Stokes Equations ◽  
Temporal Dynamics ◽  
Mixing Layer ◽  
Basis Set ◽  
Large Scale Structures ◽  
Scale Structures ◽  
Low Order

The temporal dynamics of large-scale structures in a plane turbulent mixing layer are studied through the development of a low-order dynamical system of ordinary differential equations (ODEs). This model is derived by projecting Navier–Stokes equations onto an empirical basis set from the proper orthogonal decomposition (POD) using a Galerkin method. To obtain this low-dimensional set of equations, a truncation is performed that only includes the first POD mode for selected streamwise/spanwise (k1/k3) modes. The initial truncations are for k3 = 0; however, once these truncations are evaluated, non-zero spanwise wavenumbers are added. These truncated systems of equations are then examined in the pseudo-Fourier space in which they are solved and by reconstructing the velocity field. Two different methods for closing the mean streamwise velocity are evaluated that show the importance of introducing, into the low-order dynamical system, a term allowing feedback between the turbulent and mean flows. The results of the numerical simulations show a strongly periodic flow indicative of the spanwise vorticity. The simulated flow had the correct energy distributions in the cross-stream direction. These models also indicated that the events associated with the centre of the mixing layer lead the temporal dynamics. For truncations involving both spanwise and streamwise wavenumbers, the reconstructed velocity field exhibits the main spanwise and streamwise vortical structures known to exist in this flow. The streamwise aligned vorticity is shown to connect spanwise vortex tubes.

scholarly journals Large-Scale Structures in a Subsonic Mixing Layer

1994 ◽  
Vol 6 (9) ◽  
pp. S7-S7 ◽  
Author(s):  
Saad Ragab ◽  
Madhu Sreedhar ◽  
Daniel Mulholland
Keyword(s):  
Large Scale ◽  
Mixing Layer ◽  
Large Scale Structures ◽  
Scale Structures

On the turbulent mixing of compressible free shear layers

1990 ◽  
Vol 431 (1882) ◽  
pp. 219-243 ◽  
Keyword(s):  
Stability Analysis ◽  
Shear Layer ◽  
Turbulent Mixing ◽  
Large Scale ◽  
Shear Flows ◽  
Time Dependent ◽  
Turbulent Shear ◽  
Large Scale Structures ◽  
Turbulent Shear Flows ◽  
Scale Structures

For over a quarter of a century it has been recognized that turbulent shear flows are dominated by large-scale structures. Yet the majority of models for turbulent mixing fail to include the properties of the structures either explicitly or implicitly. The results obtained using these models may appear to be satisfactory, when compared with experimental observations, but in general these models require the inclusion of empirical constants, which render the predictions only as good as the empirical database used in the determination of such constants. Existing models of turbulence also fail to provide, apart from its stochastic properties, a description of the time-dependent properties of a turbulent shear flow and its development. In this paper we introduce a model for the large-scale structures in a turbulent shear layer. Although, with certain reservations, the model is applicable to most turbulent shear flows, we restrict ourselves here to the consideration of turbulent mixing in a two-stream compressible shear layer. Two models are developed for this case that describe the influence of the large-scale motions on the turbulent mixing process. The first model simulates the average behaviour by calculating the development of the part of the turbulence spectrum related to the large-scale structures in the flow. The second model simulates the passage of a single train of large-scale structures, thereby modelling a significant part of the time-dependent features of the turbulent flow. In both these treatments the large-scale structures are described by a superposition of instability waves. The local properties of these waves are determined from linear, inviscid, stability analysis. The streamwise development of the mean flow, which includes the amplitude distribution of these instability waves, is determined from an energy integral analysis. The models contain no empirical constants. Predictions are made for the effects of freestream velocity and density ratio as well as freestream Mach number on the growth of the mixing layer. The predictions agree very well with experimental observations. Calculations are also made for the time-dependent motion of the turbulent shear layer in the form of streaklines that agree qualitatively with observation. For some other turbulent shear flows the dominant structure of the large eddies can be obtained similarly using linear stability analysis and a partial justification for this procedure is given in the Appendix. In wall-bounded flows a preliminary analysis indicates that a linear, viscous, stability analysis must be extended to second order to derive the most unstable waves and their subsequent development. The extension of the present model to such cases and the inclusion of the effects of chemical reactions in the models are also discussed.

Large-scale clustering of coherent fine-scale eddies in a turbulent mixing layer

2018 ◽  
Vol 72 ◽  
pp. 100-108
Author(s):  
Toshitaka Itoh ◽  
Yoshitsugu Naka ◽  
Yuki Minamoto ◽  
Masayasu Shimura ◽  
Mamoru Tanahashi
Keyword(s):  
Turbulent Mixing ◽  
Large Scale ◽  
Mixing Layer ◽  
Fine Scale ◽  
Turbulent Mixing Layer

Natural large-scale structures in the axisymmetric mixing layer

1984 ◽  
Vol 138 ◽  
pp. 325-351 ◽  
Author(s):  
K. B. M. Q. Zaman ◽  
A. K. M. F. Hussain
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Longitudinal Velocity ◽  
Mixing Layer ◽  
Sampling Technique ◽  
Excitation Amplitude ◽  
Initial Condition ◽  
Velocity Signal ◽  
Large Scale Structures ◽  
Scale Structures

This paper summarizes results of our investigations on: optimization of conditional sampling technique for eduction of naturally occurring large-scale structures in an axisymmetric mixing layer, comparison of the natural structure with that induced via controlled excitation, and the sensitivity of the educed structure to the excitation amplitude and of the natural coherent structure to Reynolds number and initial condition. Measurements include sectional-plane contours of various structure properties; however, coherent vorticity is the principal measure used in these considerations. All plausible alternative triggering criteria, based on reference velocity signals from fixed probes, were considered in order to arrive at the best practical eduction technique. It is shown that the simple criterion of triggering on the positive peaks of the longitudinal velocity signal derived from the high-speed edge of the mixing layer results in the optimum eduction. The characteristics of the natural structures, educed by the optimum detection criterion, are found to be independent of ReD over the measurement range 5.5 × 104−8 × 105. A mild dependence on the initial condition (viz laminar vs. turbulent) is observed, the structures being more disorganized for the initially laminar boundary-layer case. The educed natural structures agree well with those induced by controlled sinusoidal excitation at low excitation levels; higher levels, however, produce considerably stronger structures.

Sign in / Sign up

Export Citation Format

Share Document