Reducing Air Pollution from Electric Power-generation in China

1991 ◽  
Vol 18 (3) ◽  
pp. 243-248
Author(s):  
Zhiyong Wang
Keyword(s):  
Power Generation ◽  
Air Pollution ◽  
Electric Power ◽  
Oil Recovery ◽  
Power Plants ◽  
Clean Energy ◽  
Air Pollutant ◽  
Electric Power Generation ◽  
Planning And Management ◽  
Technical Planning

This paper addresses current and future concerns regarding the air-pollution situation in China, and focuses on reduction of particulates', SO2, and CO2, emissions in China's electric power-generation sector. Technical aspects of control methods include an assessment of innovative approaches such as enhanced oil recovery (EOR). Suggestions are made pertaining to the technical planning and management aspects of air-pollutant control.In a technological context, improving coal-use efficiency, increasing the proportion of coal pretreatment, and using EOR technology, should be considered; these measures have proven effective and relatively economical elsewhere. If the measures could be adopted in China's electric power-generation sector, as much as about 50% of the particulates, 34% of the SO2, and 95% of the CO2, emitted from power-plants, could be removed. If fully engaged, these actions would improve China's air environment significantly.In a planning and management context, five suggestions are made with respect to air quality regulations: administrative measures, coal prices, developing ‘clean’ energy systems, reforestation, and transferring to new energy-saving and pollution-controlling technologies. In addition to domestic efforts, active engagement in international cooperation would be extremely beneficial to China.

scholarly journals A Type-2 Fuzzy Chance-Constrained Fractional Integrated Modeling Method for Energy System Management of Uncertainties and Risks

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2472 ◽  
Author(s):  
Changyu Zhou ◽  
Guohe Huang ◽  
Jiapei Chen
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Power System ◽  
Electric Power ◽  
Clean Energy ◽  
Electric Power System ◽  
Air Pollutant ◽  
Pollutant Emissions ◽  
Mixed Integer

In this study, a type-2 fuzzy chance-constrained fractional integrated programming (T2FCFP) approach is developed for the planning of sustainable management in an electric power system (EPS) under complex uncertainties. Through simultaneously coupling mixed-integer linear programming (MILP), chance-constrained stochastic programming (CCSP), and type-2 fuzzy mathematical programming (T2FMP) techniques into a fractional programming (FP) framework, T2FCFP can tackle dual objective problems of uncertain parameters with both type-2 fuzzy characteristics and stochastic effectively and enhance the robustness of the obtained decisions. T2FCFP has been applied to a case study of a typical electric power system planning to demonstrate these advantages, where issues of clean energy utilization, air-pollutant emissions mitigation, mix ratio of renewable energy power generation in the entire energy supply, and the displacement efficiency of electricity generation technologies by renewable energy are incorporated within the modeling formulation. The suggested optimal alternative that can produce the desirable sustainable schemes with a maximized share of clean energy power generation has been generated. The results obtained can be used to conduct desired energy/electricity allocation and help decision-makers make suitable decisions under different input scenarios.

Will thermal power plants with CCS play a role in Brazil's future electric power generation?

2014 ◽  
Vol 24 ◽  
pp. 115-123 ◽  
Author(s):  
Larissa Pinheiro Pupo Nogueira ◽  
André Frossard Pereira de Lucena ◽  
Régis Rathmann ◽  
Pedro Rua Rodriguez Rochedo ◽  
Alexandre Szklo ◽  
...  
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Power Plants ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Electric Power Generation

Cogenerative Below Ambient Gas Turbine (BAGT) Performance With Variable Thermal Power

2005 ◽  
Vol 127 (3) ◽  
pp. 592-598 ◽  
Author(s):  
M. Bianchi ◽  
G. Negri di Montenegro ◽  
A. Peretto
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Gas Turbine ◽  
Power Plants ◽  
Ambient Pressure ◽  
Thermal Power ◽  
Combined Cycle ◽  
Electric Power Generation ◽  
Pressure Discharge ◽  
Discharge Gas

The use of gas turbine and combined cycle power plants for thermal and electric power generation is, nowadays, a consolidated technology. Moreover, the employment of combined heat and power production, especially for low power requirements, is constantly increasing. In this scenario, below ambient pressure discharge gas turbine (BAGT) is an innovative and interesting application; the hot gases discharged from a gas turbine may be expanded below ambient pressure to obtain an increase in electric power generation. The gases are then cooled to supply heat to the thermal utility and finally recompressed to the ambient pressure. The power plant cogenerative performance depends on the heat and electric demand that usually varies during the year (for residential heating the heat to electric power ratio may range from 0.3 to 9). In this paper, the thermal load variation influence on the BAGT performance will be investigated and compared with those of gas turbine and combined cycle power plants.

Electric Power Generation Equipment Specification and Supply in the Rapidly Changing Global Regulatory Scene

2002 ◽  
Author(s):  
Lawrence D. Willey ◽  
Joel Chalfin
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Power Plants ◽  
Rapid Change ◽  
Conformity Assessment ◽  
Production Volume ◽  
The European Union ◽  
Electric Power Generation ◽  
Technical Standards ◽  
Power Generation Equipment

The proliferation of new codes & standards for power generation equipment procurement, and their increased frequency of revision, contributes to an atmosphere of increasingly rapid change in global trade considerations. This dynamic environment has amplified intensely with each year, to an extent that the life cycle of a given standard is in many instances appreciably less than the delivery cycles of heavy machinery. Other issues are created by the slower pace of harmonization of codes & standards in the European Union (EU), US and elsewhere. These codes & standards cover requirements that include emissions, acoustics, and safety that exert pronounced effects on the design, manufacture, and integration of power plant components. Conformity assessment partnering and the importance of other expert interpretation services are a key component to successfully meeting evolving compliance requirements. Delivering Customer Fulfillment for the Order to Remittance (OTR) phase of a project must be circled back to the Inquiry to Order (ITO) front end of the business cycle for new proposals. Another interesting arena is the relationship of advanced prime mover design balanced with the need for standardization to meet these regulatory challenges in the face of high production volume. The typical power generation project cycle, measured in terms of years, coupled with the present high demand worldwide results in orders for equipment that in many cases can’t foresee regulatory requirements 2 to 3 years into the future. Examples include projects in the EU where the Pressure Equipment Directive (PED) and Atmospheres Explosive (ATEX) Directive have mandatory compliance dates of May 2002 and June 2003 respectively. Electric power generation Original Equipment Manufacturers (OEMs) and their suppliers must plan for and price into contracts compliance with these laws years before the equipment is built and shipped. This is further complicated by the interpretation of specific requirements and the definition of the OEM conformity assessment strategy. To rectify this situation, it is recommended that steps be initiated to accelerate the worldwide harmonization of technical standards. In addition, consideration for the delivery cycles and commissioning of new power plants must be included in the regulatory process and in setting the dates for mandatory compliance with regional law.

Cogenerative BAGT Performance With Variable Thermal Power

2002 ◽  
Author(s):  
M. Bianchi ◽  
G. Negri di Montenegro ◽  
A. Peretto
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Gas Turbine ◽  
Power Plants ◽  
Ambient Pressure ◽  
Thermal Power ◽  
Combined Cycle ◽  
Electric Power Generation ◽  
Pressure Discharge ◽  
Discharge Gas

The use of gas turbine and combined cycle power plants for thermal and electric power generation is, nowadays, a consolidated technology. Moreover the employment of combined heat and power production, especially for low power requirements, is constantly increasing. In this scenario, Below Ambient pressure discharge Gas Turbine (BAGT) is an innovative and interesting application; the hot gases discharged from a gas turbine may be expanded below ambient pressure to obtain an increase in electric power generation. The gases are then cooled to supply heat to the thermal utility and finally recompressed to the ambient pressure. The power plant cogenerative performance depends on the heat and electric demand that usually varies during the year (for residential heating the heat to electric power ratio may range from 0.3 to 9). In this paper, the thermal load variation influence on the BAGT performance will be investigated and compared with those of gas turbine and combined cycle power plants.

Sign in / Sign up

Export Citation Format

Share Document