Preparation of a Cross-Linked Sulfonated Poly(arylene ether ketone) Proton Exchange Membrane with Enhanced Proton Conductivity and Methanol Resistance by Introducing an Ionic Liquid-Impregnated Metal Organic Framework

2019 ◽  
Vol 11 (35) ◽  
pp. 31899-31908 ◽  
Author(s):  
Chunyu Ru ◽  
Yiyang Gu ◽  
Hui Na ◽  
Haolong Li ◽  
Chengji Zhao
Keyword(s):  
Ionic Liquid ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Metal Organic Framework ◽  
Proton Exchange ◽  
Arylene Ether ◽  
Metal Organic ◽  
Ether Ketone ◽  
Exchange Membrane ◽  
Sulfonated Poly

Dual sulfonated poly(arylene ether ketone) membrane grafted with 15-crown-5-ether for enhanced proton conductivity and anti-oxidation stability

2019 ◽  
Vol 4 (4) ◽  
pp. 901-911 ◽  
Author(s):  
Dinh Cong Tinh Vo ◽  
Minh Dat Thinh Nguyen ◽  
Dukjoon Kim
Keyword(s):  
Fuel Cell ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Oxidation Stability ◽  
Critical Issue ◽  
Proton Exchange ◽  
Arylene Ether ◽  
Ether Ketone ◽  
Exchange Membrane ◽  
Sulfonated Poly

In the proton exchange membrane fuel cell, durability has recently been the critical issue in its operation.

Polymerized imidazolium ionic liquids crosslinking sulfonated poly(ether ether ketone) (SPEEK) for high-temperature proton exchange membrane

RSC Advances ◽  
2016 ◽  
Vol 6 (113) ◽  
pp. 111729-111738 ◽  
Author(s):  
Quantong Che ◽  
Jie Yue
Keyword(s):  
Ionic Liquid ◽  
High Temperature ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Imidazolium Ionic Liquids ◽  
Ether Ether Ketone ◽  
Poly Ether Ether Ketone ◽  
Ether Ketone ◽  
Exchange Membrane ◽  
Sulfonated Poly

An ionic liquid (IL) monomer of (acryloyloxy)propanylimidazolium chloride with unsaturated carbon–carbon double bonds was synthesized.

Preparation and Characterization of Proton Exchange Membrane Based on Sulfonated Poly(arylene ether sulfone)/Polyacrylonitrile (SPAES/PAN)

2014 ◽  
Vol 577 ◽  
pp. 53-57
Author(s):  
Hang Wei ◽  
Guang Li
Keyword(s):  
Oxidative Stability ◽  
Proton Conductivity ◽  
Water Uptake ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Arylene Ether ◽  
Blend Membranes ◽  
Exchange Membrane ◽  
Sulfonated Poly

Sulfonated poly (arylene ether sulfone) s (SPAESs) exhibit good proton conductivity, thermal and mechanical properties, could act as candidates of proton exchange membranes for fuel cells. At the same time, the poor oxidative stability and excessive swelling ratio of SPAESs bring limitations for its further use. In this article, PAN was employed to mix with SPAES, and then SPAES/PAN blend membranes were prepared from the blend solution by casting. The water uptake, dimensional and oxidative stability, proton conductivity were measured with respect to the addition content of PAN, the phase morphology of the resultant SPAES/PAN were also observed by SEM. The results explained that the corporation of PAN into SPAES could reduce the water uptake and improve the oxidative stability of the obtained membranes compared with the pristine SPAES membrane. That the PAN phase distributed as separated domains in SPAES matrix was found, the interaction between SPAES and PAN may be present, which is responsible for the improvement of dimensional and oxidative stability. Although the proton conductivity of the blend membranes became reduced with increase of PAN content in the SPAES/PAN blend, the conductivity of 0.0265S/cm at 30°C could still be reached, satisfying the requirement for proton exchange membrane Fuel Cell

scholarly journals Ameliorated Performance of Sulfonated Poly(Arylene Ether Sulfone) Block Copolymers with Increased Hydrophilic Oligomer Ratio in Proton-Exchange Membrane Fuel Cells Operating at 80% Relative Humidity

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1871 ◽  
Author(s):  
Ae Kim ◽  
Mohanraj Vinothkannan ◽  
Kyu Lee ◽  
Ji Chu ◽  
Sumg Ryu ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Relative Humidity ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Arylene Ether ◽  
Poly Condensation ◽  
Exchange Membrane ◽  
Sulfonated Poly

We designed and synthesized a series of sulfonated poly(arylene ether sulfone) (SPES) with different hydrophilic or hydrophobic oligomer ratios using poly-condensation strategy. Afterward, we fabricated the corresponding membranes via a solution-casting approach. We verified the SPES membrane chemical structure using nuclear magnetic resonance (1H NMR) and confirmed the resulting oligomer ratio. Field-emission scanning electron microscope (FE-SEM) and atomic force microscope (AFM) results revealed that we effectively attained phase separation of the SPES membrane along with an increased hydrophilic oligomer ratio. Thermal stability, glass transition temperature (Tg) and membrane elongation increased with the ratio of hydrophilic oligomers. SPES membranes with higher hydrophilic oligomer ratios exhibited superior water uptake, ion-exchange capacity, contact angle and water sorption, while retaining reasonable swelling degree. The proton conductivity results showed that SPES containing higher amounts of hydrophilic oligomers provided a 74.7 mS cm−1 proton conductivity at 90 °C, which is better than other SPES membranes, but slightly lower than that of Nafion-117 membrane. When integrating SPES membranes with proton-exchange membrane fuel cells (PEMFCs) at 60 °C and 80% relative humidity (RH), the PEMFC power density exhibited a similar increment-pattern like proton conductivity pattern.

Sign in / Sign up

Export Citation Format

Share Document