Enhanced Cationic Dyes Removal from Aqueous Solution by Oxalic Acid Modified Rice Husk

2011 ◽  
Vol 56 (5) ◽  
pp. 1882-1891 ◽  
Author(s):  
Weihua Zou ◽  
Ke Li ◽  
Hongjuan Bai ◽  
Xiaolan Shi ◽  
Runping Han
Keyword(s):  
Aqueous Solution ◽  
Oxalic Acid ◽  
Rice Husk ◽  
Cationic Dyes ◽  
Dyes Removal

Improvement of Anionic and Cationic Dyes Removal in Aqueous Solution by Indonesian Agro-Waste Oil Palm Empty Fruit Bunches through Silylation Approach

2021 ◽  
pp. 100570
Author(s):  
Ozi A. Saputra ◽  
Martha Nauqinida ◽  
Kurnia ◽  
Septi Pujiasih ◽  
Triana Kusumaningsih ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Oil Palm ◽  
Cationic Dyes ◽  
Waste Oil ◽  
Empty Fruit Bunches ◽  
Dyes Removal

STUDIES ON CONTINUOUS ADSORPTION OF ACETIC ACID FROM AQUEOUS SOLUTION USING RICE HUSK ADSORBENT

2018 ◽  
Vol 14 (1) ◽  
pp. 42
Author(s):  
S. V. A. R. SASTRY ◽  
SRI ADIBATLA ANUSHA ◽  
S. VARUN ◽  
◽  
◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Acetic Acid ◽  
Rice Husk ◽  
Continuous Adsorption

Removal of Toxic Dyestuffs from Aqueous Solution by Amphoteric Bioadsorbent

2020 ◽  
Vol 16 ◽  
Author(s):  
Reda M. El-Shishtawy ◽  
Abdullah M. Asiri ◽  
Nahed S. E. Ahmed
Keyword(s):  
Aqueous Solution ◽  
Ion Exchange ◽  
Dye Removal ◽  
Exchange Process ◽  
Cationic Dyes ◽  
Carboxyl Groups ◽  
Maximum Adsorption Capacity ◽  
Equilibrium Isotherm ◽  
Ion Exchange Process ◽  
Dyes And Pigments

Background: Color effluents generated from the production industry of dyes and pigments and their use in different applications such as textile, paper, leather tanning, and food industries, are high in color and contaminants that damage the aquatic life. It is estimated that about 105 of various commercial dyes and pigments amounted to 7×105 tons are produced annually worldwide. Ultimately, about 10–15% is wasted into the effluents of the textile industry. Chitin is abundant in nature, and it is a linear biopolymer containing acetamido and hydroxyl groups amenable to render it atmospheric by introducing amino and carboxyl groups, hence able to remove different classes of toxic organic dyes from colored effluents. Methods: Chitin was chemically modified to render it amphoteric via the introduction of carboxyl and amino groups. The amphoteric chitin has been fully characterized by FTIR, TGA-DTG, elemental analysis, SEM, and point of zero charge. Adsorption optimization for both anionic and cationic dyes was made by batch adsorption method, and the conditions obtained were used for studying the kinetics and thermodynamics of adsorption. Results: The results of dye removal proved that the adsorbent was proven effective in removing both anionic and cationic dyes (Acid Red 1 and methylene blue (MB)), at their respective optimum pHs (2 for acid and 8 for cationic dye). The equilibrium isotherm at room temperature fitted the Freundlich model for MB, and the maximum adsorption capacity was 98.2 mg/g using 50 mg/l of MB, whereas the equilibrium isotherm fitted the Freundlich and Langmuir model for AR1 and the maximum adsorption capacity was 128.2 mg/g. Kinetic results indicate that the adsorption is a two-step diffusion process for both dyes as indicated by the values of the initial adsorption factor (Ri) and follows the pseudo-second-order kinetics. Also, thermodynamic calculations suggest that the adsorption of AR1 on the amphoteric chitin is an endothermic process from 294 to 303 K. The result indicated that the mechanism of adsorption is chemisorption via an ion-exchange process. Also, recycling of the adsorbent was easy, and its reuse for dye removal was effective. Conclusion: New amphoteric chitin has been successfully synthesized and characterized. This resin material, which contains amino and carboxyl groups, is novel as such chemical modification of chitin hasn’t been reported. The amphoteric chitin has proven effective in decolorizing aqueous solution from anionic and cationic dyes. The adsorption behavior of amphoteric chitin is believed to follow chemical adsorption with an ion-exchange process. The recycling process for few cycles indicated that the loaded adsorbent could be regenerated by simple treatment and retested for removing anionic and cationic dyes without any loss in the adsorbability. Therefore, the study introduces a new and easy approach for the development of amphoteric adsorbent for application in the removal of different dyes from aqueous solutions.

Multifunctional amphoteric resin to remove both anionic and cationic dyes from aqueous solution

2021 ◽  
pp. 51283
Author(s):  
Ramazan Coşkun ◽  
Kadriye Öncel ◽  
Yasin Akköz
Keyword(s):  
Aqueous Solution ◽  
Cationic Dyes

Evaluation of the adsorptive removal of cationic dyes by greening biochar derived from agricultural bio-waste of rice husk

2021 ◽  
Author(s):  
Praveen Saravanan ◽  
Jegan Josephraj ◽  
Bhagavathi Pushpa Thillainayagam ◽  
Gokulan Ravindiran
Keyword(s):  
Rice Husk ◽  
Cationic Dyes ◽  
Adsorptive Removal

Step towards the sustainable toxic dyes removal and recycling from aqueous solution- A comprehensive review

2021 ◽  
Vol 175 ◽  
pp. 105849 ◽  
Author(s):  
Aminul Islam ◽  
Siow Hwa Teo ◽  
Yun Hin Taufiq-Yap ◽  
Chi Huey Ng ◽  
Dai-Viet N. Vo ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Comprehensive Review ◽  
Toxic Dyes ◽  
Dyes Removal

Novel Fe3O4@lignosulfonate/phenolic core-shell microspheres for highly efficient removal of cationic dyes from aqueous solution

2019 ◽  
Vol 127 ◽  
pp. 110-118 ◽  
Author(s):  
Guanhua Wang ◽  
Qingjun Liu ◽  
Minmin Chang ◽  
Jinmyung Jang ◽  
Wenjie Sui ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Cationic Dyes ◽  
Core Shell ◽  
Efficient Removal ◽  
Highly Efficient
Sign in / Sign up

Export Citation Format

Share Document