scholarly journals A comparison of ISCCP land surface temperature with other satellite and in situ observations

2012 ◽  
Vol 117 (D8) ◽  
pp. n/a-n/a ◽  
Author(s):  
Carlos Jiménez ◽  
Catherine Prigent ◽  
Julie Catherinot ◽  
William Rossow ◽  
Pan Liang ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
In Situ Observations

Long-term trends of surface reflectance derived from models, satellite and in-situ observations over polar areas

2020 ◽  
Author(s):  
Christian Lanconelli ◽  
Fabrizio Cappucci ◽  
Bernardo Mota ◽  
Nadine Gobron ◽  
Amelie Driemel ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Kendall Test ◽  
Surface Radiation ◽  
In Situ Data ◽  
In Situ Observations

<div> <p>Nowadays, an increasingly amount of remote sensing and in-situ data are extending over decades. They contribute to increase the relevance of long-term studies aimed to deduce the mechanisms underlying the climate change dynamics. The aim of this study is to investigate the coherence between trends of different long-term climate related variables including the surface albedo (A) and land surface temperature (LST) as obtained by remote sensing platforms, models and in-situ observations. </p> </div><div> <p>Directional-hemispherical and bi-hemispherical broadband surface reflectances as derived from MODIS-MCD43 (v006) and MISR, and the analogous products of the Copernicus Global Land (CGLS) and C3S services derived from SPOT-VEGETATION, PROBA-V and AVHRR (v0 and v1), have been harmonized and, together with the ECMWF ERA-5 model, assessed with respect ground data taken over polar areas, over a temporal window spanning the last 20 years.  </p> </div><div> <p>The benchmark was established using in-situ measurements provided from the Baseline Surface Radiation Network (BSRN) over four Arctic and four Antarctic sites. The 1-minute resolution datasets of broadband upwelling and down-welling radiation, have been reduced to directional- and bi-hemispherical reflectances, with the same time scale of satellite products (1-day, 10-days, monthly).  </p> </div><div> <p>A similar approach was used to investigate the fitness for purpose of Land Surface Temperature as derived by MODIS (MOD11), ECMWF ERA-5, with respect to the brightness temperature derived using BSRN measurements over the longwave band.  </p> </div><div> <p>The entire temporal series are decomposed into seasonal and residual components, and then the presence of monotonic significant trends are assessed using the non-parametric Kendall test. Preliminary results shown a strong correlation between negative albedo trends and positive LST trends, especially in arctic regions. </p> </div>

Plot-scale retrieval of land surface temperature and emissivity estimation

2021 ◽  
Author(s):  
Gitanjali Thakur ◽  
Stan Schymanski ◽  
Kaniska Mallick ◽  
Ivonne Trebs
Keyword(s):  
Land Cover ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Satellite Data ◽  
Land Surface ◽  
Longwave Radiation ◽  
Landscape Scale ◽  
The Earth ◽  
Downwelling Longwave Radiation

<p>The surface energy balance (SEB) is defined as the balance between incoming energy from the sun and outgoing energy from the Earth’s surface. All components of the SEB depend on land surface temperature (LST). Therefore, LST is an important state variable that controls the energy and water exchange between the Earth’s surface and the atmosphere. LST can be estimated radiometrically, based on the infrared radiance emanating from the surface. At the landscape scale, LST is derived from thermal radiation measured using  satellites.  At the plot scale, eddy covariance flux towers commonly record downwelling and upwelling longwave radiation, which can be inverted to retrieve LST  using the grey body equation :<br>             R<sub>lup</sub> = εσ T<sub>s</sub><sup>4</sup> + (1 − ε) R<sub> ldw         </sub>(1)<br>where R<sub>lup</sub> is the upwelling longwave radiation, R<sub>ldw</sub> is the downwelling longwave radiation, ε is the surface emissivity, <em>T<sub>s</sub>  </em>is the surface temperature and σ  is the Stefan-Boltzmann constant. The first term is the temperature-dependent part, while the second represents reflected longwave radiation. Since in the past downwelling longwave radiation was not measured routinely using flux towers, it is an established practice to only use upwelling longwave radiation for the retrieval of plot-scale LST, essentially neglecting the reflected part and shortening Eq. 1 to:<br>               R<sub>lup</sub> = εσ T<sub>s</sub><sup>4 </sup>                       (2)<br>Despite  widespread availability of downwelling longwave radiation measurements, it is still common to use the short equation (Eq. 2) for in-situ LST retrieval. This prompts the question if ignoring the downwelling longwave radiation introduces a bias in LST estimations from tower measurements. Another associated question is how to obtain the correct ε needed for in-situ LST retrievals using tower-based measurements.<br>The current work addresses these two important science questions using observed fluxes at eddy covariance towers for different land cover types. Additionally, uncertainty in retrieved LST and emissivity due to uncertainty in input fluxes was quantified using SOBOL-based uncertainty analysis (SALib). Using landscape-scale emissivity obtained from satellite data (MODIS), we found that the LST  obtained using the complete equation (Eq. 1) is 0.5 to 1.5 K lower than the short equation (Eq. 2). Also, plot-scale emissivity was estimated using observed sensible heat flux and surface-air temperature differences. Plot-scale emissivity obtained using the complete equation was generally between 0.8 to 0.98 while the short equation gave values between 0.9 to 0.98, for all land cover types. Despite additional input data for the complete equation, the uncertainty in plot-scale LST was not greater than if the short equation was used. Landscape-scale daytime LST obtained from satellite data (MODIS TERRA) were strongly correlated with our plot-scale estimates, but on average higher by 0.5 to 9 K, regardless of the equation used. However, for most sites, the correspondence between MODIS TERRA LST and retrieved plot-scale LST estimates increased significantly if plot-scale emissivity was used instead of the landscape-scale emissivity obtained from satellite data.</p>

scholarly journals Variational Assimilation of Land Surface Temperature within the ORCHIDEE Land Surface Model Version 1.2.6

2016 ◽  
Author(s):  
H. S. Benavides Pinjosovsky ◽  
S. Thiria ◽  
C. Ottlé ◽  
J. Brajard ◽  
F. Badran ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Initial Conditions ◽  
Land Surface Model ◽  
Surface Model ◽  
Adjoint Model ◽  
Variational Assimilation ◽  
Internal Parameters

Abstract. The SECHIBA module of the ORCHIDEE land surface model describes the exchanges of water and energy between the surface and the atmosphere. In the present paper, the adjoint semi-generator software denoted YAO was used as a framework to implement a 4D-VAR assimilation method. The objective was to deliver the adjoint model of SECHIBA (SECHIBA-YAO) obtained with YAO to provide an opportunity for scientists and end users to perform their own assimilation. SECHIBA-YAO allows the control of the eleven most influent internal parameters of SECHIBA or of the initial conditions of the soil water content by observing the land surface temperature measured in situ or as it could be observed by remote sensing as brightness temperature. The paper presents the fundamental principles of the 4D-Var assimilation, the semi-generator software YAO and some experiments showing the accuracy of the adjoint code distributed. In addition, a distributed version is available when only the land surface temperature is observed.

Evaluating the potential of MODIS-LST for monitoring ground surface temperatures in the Maritime Antarctic (Barton Peninsula, King George Island, Antarctic). 

2021 ◽  
Author(s):  
Alejandro Corbea-Pérez ◽  
Gonçalo Vieira ◽  
Carmen Recondo ◽  
Joana Baptista ◽  
Javier F.Calleja ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Ground Temperature ◽  
King George Island ◽  
Maritime Antarctic ◽  
In Situ Data ◽  
Surface Temperatures ◽  
Barton Peninsula

<p>Land surface temperature is an important factor for permafrost modelling as well as for understanding the dynamics of Antarctic terrestrial ecosystems (Bockheim et al. 2008). In the South Shetland Islands the distribution of permafrost is complex (Vieira et al. 2010) and the use of remote sensing data is essential since the installation and maintenance of an extensive network of ground-based stations are impossible. Therefore, it is important to evaluate the applicability of satellites and sensors by comparing data with in-situ observations. In this work, we present the results from the analysis of land surface temperatures from Barton Peninsula, an ice-free area in King George Island (South Shetlands). We have studied the period from March 1, 2019 to January 31, 2020 using data from the Moderate Resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature (LST) and in-situ data from 6 ground temperature loggers. MOD11A1 and MYD11A1 products, from TERRA and AQUA satellites, respectively, were used, following the application of MODIS quality filters. Given the scarce number of high-quality data as defined by MODIS, all average LST with error ≤ 2K were included. Dates with surface temperature below -20ºC, which are rare in the study area, and dates when the difference between MODIS and in-situ data exceeded 10ºC were also examined. In both cases, those days on which MOD09GA/MYD09GA products showed cloud cover were eliminated. Eight in-situ ground temperature measurements per day were available, from which the one nearest to the time of satellite overpass was selected for comparison with MODIS-LST. The results obtained show a better correlation with daytime data than with nighttime data. Specifically, the best results are obtained with daytime data from AQUA (R<sup>2</sup> between 0.55 and 0.81). With daytime data, correlation between MODIS-LST and in-situ data was verified with relative humidity (RH) values provided by King Sejong weather station, located in the study area. When RH is lower, the correlation between LST and in-situ data improves: we obtained correlation coefficients between 0.6 - 0.7 for TERRA data and 0.8 - 0.9 for AQUA data with RH values lower than 80%. The results suggest that MODIS can be used for temperature estimation in the ice-free areas of the Maritime Antarctic.</p><p>References:</p><p>Bockheim, J. G., Campbell, I. B., Guglielmin, M., and López- Martınez, J.: Distribution of permafrost types and buried ice in ice free areas of Antarctica, in: 9th International Conference on Permafrost, 28 June–3 July 2008, Proceedings, University of Alaska Press, Fairbanks, USA, 2008, 125–130.</p><p>Vieira, G.; Bockheim, J.; Guglielmin, M.; Balks, M.; Abramov, A. A.; Boelhouwers, J.; Cannone, N.; Ganzert, L.; Gilichinsky, D. A.; Goryachkin, S.; López-Martínez, J.; Meiklejohn, I.; Raffi, R.; Ramos, M.; Schaefer, C.; Serrano, E.; Simas, F.; Sletten, R.; Wagner, D. Thermal State of Permafrost and Active-layer Monitoring in the Antarctic: Advances During the International Polar Year 2007-2009. Permafr. Periglac. Process. 2010, 21, 182–197.</p><p> </p><p>Acknowledgements</p><p>This work was made possible by an internship at the IGOT, University of Lisbon, Portugal, funded by the Principality of Asturias (code EB20-16).</p><p> </p>

scholarly journals Evaluation of Seven Atmospheric Profiles from Reanalysis and Satellite-Derived Products: Implication for Single-Channel Land Surface Temperature Retrieval

2020 ◽  
Vol 12 (5) ◽  
pp. 791 ◽  
Author(s):  
Jingjing Yang ◽  
Si-Bo Duan ◽  
Xiaoyu Zhang ◽  
Penghai Wu ◽  
Cheng Huang ◽  
...  
Keyword(s):  
Time Series ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Landsat 8 ◽  
Atmospheric Profiles ◽  
Atmospheric Profile

Land surface temperature (LST) is vital for studies of hydrology, ecology, climatology, and environmental monitoring. The radiative-transfer-equation-based single-channel algorithm, in conjunction with the atmospheric profile, is regarded as the most suitable one with which to produce long-term time series LST products from Landsat thermal infrared (TIR) data. In this study, the performances of seven atmospheric profiles from different sources (the MODerate-resolution Imaging Spectroradiomete atmospheric profile product (MYD07), the Atmospheric Infrared Sounder atmospheric profile product (AIRS), the European Centre for Medium-range Weather Forecasts (ECMWF), the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA2), the National Centers for Environmental Prediction (NCEP)/Global Forecasting System (GFS), NCEP/Final Operational Global Analysis (FNL), and NCEP/Department of Energy (DOE)) were comprehensively evaluated in the single-channel algorithm for LST retrieval from Landsat 8 TIR data. Results showed that when compared with the radio sounding profile downloaded from the University of Wyoming (UWYO), the worst accuracies of atmospheric parameters were obtained for the MYD07 profile. Furthermore, the root-mean-square error (RMSE) values (approximately 0.5 K) of the retrieved LST when using the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles were smaller than those but greater than 0.8 K when the MYD07, AIRS, and NCEP/DOE profiles were used. Compared with the in situ LST measurements that were collected at the Hailar, Urad Front Banner, and Wuhai sites, the RMSE values of the LST that were retrieved by using the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles were approximately 1.0 K. The largest discrepancy between the retrieved and in situ LST was obtained for the NCEP/DOE profile, with an RMSE value of approximately 1.5 K. The results reveal that the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles have great potential to perform accurate atmospheric correction and generate long-term time series LST products from Landsat TIR data by using a single-channel algorithm.

scholarly journals Validation of Collection 6 MODIS land surface temperature product using in situ measurements

2019 ◽  
Vol 225 ◽  
pp. 16-29 ◽  
Author(s):  
Si-Bo Duan ◽  
Zhao-Liang Li ◽  
Hua Li ◽  
Frank-M. Göttsche ◽  
Hua Wu ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
In Situ Measurements ◽  
Modis Land Surface Temperature

scholarly journals Estimation of Land Surface Temperature in an Agricultural Region of Bangladesh from Landsat 8: Intercomparison of Four Algorithms

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1778 ◽  
Author(s):  
Md Qutub Uddin Sajib ◽  
Tao Wang
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Cross Validation ◽  
Single Channel ◽  
Landsat 8 ◽  
Atmospheric Parameters ◽  
Moderate Resolution ◽  
Split Window Algorithm

The presence of two thermal bands in Landsat 8 brings the opportunity to use either one or both of these bands to retrieve Land Surface Temperature (LST). In order to compare the performances of existing algorithms, we used four methods to retrieve LST from Landsat 8 and made an intercomparison among them. Apart from the direct use of the Radiative Transfer Equation (RTE), Single-Channel Algorithm and two Split-Window Algorithms were used taking an agricultural region in Bangladesh as the study area. The LSTs retrieved in the four methods were validated in two ways: first, an indirect validation against reference LST, which was obtained in the Atmospheric and Topographic CORection (ATCOR) software module; second, cross-validation with Terra MODerate Resolution Imaging Spectroradiometer (MODIS) daily LSTs that were obtained from the Application for Extracting and Exploring Analysis Ready Samples (A ρ ρ EEARS) online tool. Due to the absence of LST-monitoring radiosounding instruments surrounding the study area, in situ LSTs were not available; hence, validation of satellite retrieved LSTs against in situ LSTs was not performed. The atmospheric parameters necessary for the RTE-based method, as well as for other methods, were calculated from the National Centers for Environmental Prediction (NCEP) database using an online atmospheric correction calculator with MODerate resolution atmospheric TRANsmission (MODTRAN) codes. Root-mean-squared-error (RMSE) against reference LST, as well as mean bias error against both reference and MODIS daily LSTs, was used to interpret the relative accuracy of LST results. All four methods were found to result in acceptable LST products, leaving atmospheric water vapor content (w) as the important determinant for the precision result. Considering a set of several Landsat 8 images of different dates, Jiménez-Muñoz et al.’s (2014) Split-Window algorithm was found to result in the lowest mean RMSE of 1.19 ° C . Du et al.’s (2015) Split-Window algorithm resulted in mean RMSE of 1.50 ° C . The RTE-based direct method and the Single-Channel algorithm provided the mean RMSE of 2.47 ° C and 4.11 ° C , respectively. For Du et al.’s algorithm, the w range of 0.0 to 6.3 g cm−2 was considered, whereas for the other three methods, w values as retrieved from the NCEP database were considered for corresponding images. Land surface emissivity was retrieved through the Normalized Difference Vegetation Index (NDVI)-threshold method. This intercomparison study provides an LST retrieval methodology for Landsat 8 that involves four algorithms. It proves that (i) better LST results can be obtained using both thermal bands of Landsat 8; (ii) the NCEP database can be used to determine atmospheric parameters using the online calculator; (iii) MODIS daily LSTs from A ρ ρ EEARS can be used efficiently in cross-validation and intercomparison of Landsat 8 LST algorithms; and (iv) when in situ LST data are not available, the ATCOR-derived LSTs can be used for indirect verification and intercomparison of Landsat 8 LST algorithms.

scholarly journals Evaluation of Collection-6 MODIS Land Surface Temperature Product Using Multi-Year Ground Measurements in an Arid Area of Northwest China

2018 ◽  
Vol 10 (11) ◽  
pp. 1852 ◽  
Author(s):  
Lei Lu ◽  
Tingjun Zhang ◽  
Tiejun Wang ◽  
Xiaoming Zhou
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Northwest China ◽  
Bare Soil ◽  
Vegetation Monitoring ◽  
Modis Land Surface Temperature ◽  
Global Circulation Models ◽  
In Situ Data

Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) products are widely used in ecology, hydrology, vegetation monitoring, and global circulation models. Compared to the collection-5 (C5) LST products, the newly released collection-6 (C6) LST products have been refined over bare soil pixels. This study aims to evaluate the C6 MODIS 1-km LST product using multi-year in situ data covering barren surfaces. Evaluation using all in situ data shows that the MODIS C6 LSTs are underestimated with a root-mean-square error (RMSE) of 2.59 K for the site in the Gobi area, 3.05 K for the site in the sand desert area, and 2.86 K for the site in the desert steppe area at daytime. For nighttime LSTs, the RMSEs are 2.01 K, 2.88 K, and 1.80 K for the three sites, respectively. Both biases and RMSEs also show strong seasonal signals. Compared to the error of C5 1-km LSTs, the RMSE of C6 1-km LST product is smaller, especially for daytime LSTs, with a value of 2.24 K compared to 3.51 K. The large errors in the sand desert region are presumably due to the lack of global representativeness of the magnitude of emissivity adjustment and misclassification for the barren surface causing error in emissivities. It indicates that the accuracy of the MODIS C6 LST product might be further improved through emissivity adjustment with globally representative magnitude and accurate land cover classification. From this study, the MODIS C6 1-km LST product is recommended for applications.

Sign in / Sign up

Export Citation Format

Share Document