Mesoporous SnO2nanoparticle films as electron-transporting material in perovskite solar cells

RSC Advances ◽  
2015 ◽  
Vol 5 (36) ◽  
pp. 28424-28429 ◽  
Author(s):  
Yi Li ◽  
Jun Zhu ◽  
Yang Huang ◽  
Feng Liu ◽  
Mei Lv ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell

A mesoporous SnO2electrode is firstly introduced in the CH3NH3PbI3perovskite solar cell as the electron-transporting material and scaffold layer with over 10% power conversion efficiency.

Enhanced performance via partial lead replacement with calcium for a CsPbI3 perovskite solar cell exceeding 13% power conversion efficiency

2018 ◽  
Vol 6 (14) ◽  
pp. 5580-5586 ◽  
Author(s):  
Cho Fai Jonathan Lau ◽  
Xiaofan Deng ◽  
Jianghui Zheng ◽  
Jincheol Kim ◽  
Zhilong Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Partial Replacement ◽  
Reverse Scan

Partial replacement of Pb in CsPbI3 perovskite solar cells with Ca enhances power conversion efficiency to 13.5% under reverse scan (stabilised at 13.3%), without sacrificing stability.

scholarly journals Dopant-free molecular hole transport material that mediates a 20% power conversion efficiency in a perovskite solar cell

2019 ◽  
Vol 12 (12) ◽  
pp. 3502-3507 ◽  
Author(s):  
Yang Cao ◽  
Yunlong Li ◽  
Thomas Morrissey ◽  
Brian Lam ◽  
Brian O. Patrick ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
High Purity ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Hole Transport

Organic molecular hole-transport materials (HTMs) are appealing for the scalable manufacture of perovskite solar cells (PSCs) because they are easier to reproducibly prepare in high purity than polymeric and inorganic HTMs.

Enhancing perovskite solar cell performance and stability by doping barium in methylammonium lead halide

2017 ◽  
Vol 5 (34) ◽  
pp. 18044-18052 ◽  
Author(s):  
Shun-Hsiang Chan ◽  
Ming-Chung Wu ◽  
Kun-Mu Lee ◽  
Wei-Cheng Chen ◽  
Tzu-Hao Lin ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Cell Performance ◽  
Solar Cell Performance ◽  
Lead Halide

The power conversion efficiency of perovskite solar cells can be enhanced by using Ba2+-doped perovskite films.

scholarly journals Optimation of Layers Thickness Design of Perovskite Solar Cell (PSC) Using GPVDM Simulation

2019 ◽  
Vol 2 (2) ◽  
pp. 56
Author(s):  
Dita Puspita
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Optimal Power ◽  
The Ideal

In this research, perovskite solar cells by configuring ITO/PEDOT:PSS/CH3NH3PbI3/ZnO/Al changed to optimize their performance. Modifications are made by varying the thickness of each layer to increase the ideal thickness with an optimal power conversion efficiency (PCE) value. This research used GPVDM software to study several power conversion efficiency (PCE) parameters of ITO/PEDOT:PSS/CH3NH3PbI3/ZnO/Al solar cells. The results of the study show that the power conversion efficiency (PCE) can be increased by adjusting the thickness of the coating, in this study the ideal thickness with the highest power conversion efficiency 25.75% in 1x10-8 m of ITO, 1x10-6 m of PEDOT:PSS, 4x10-7 m of CH3NH3PbI3, 1x10-8 m of ZnO and 1x10-9 m of Al.

scholarly journals Strong electron acceptor additive based spiro-OMeTAD for high-performance and hysteresis-less planar perovskite solar cells

RSC Advances ◽  
2020 ◽  
Vol 10 (64) ◽  
pp. 38736-38745
Author(s):  
Shibo Wang ◽  
Weihai Sun ◽  
Mingjing Zhang ◽  
Huiying Yan ◽  
Guoxin Hua ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Electron Acceptor ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Strong Electron

A perovskite solar cell with DDQ doped spiro-OMeTAD HTL delivers a champion power conversion efficiency of 21.16%.

Pyrrole: an additive for improving the efficiency and stability of perovskite solar cells

2019 ◽  
Vol 7 (19) ◽  
pp. 11764-11770 ◽  
Author(s):  
Xuping Liu ◽  
Jihuai Wu ◽  
Qiyao Guo ◽  
Yuqian Yang ◽  
Hui Luo ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Optimal Power

A perovskite solar cell with pyrrole doping achieves an optimal power conversion efficiency of 20.07%.

scholarly journals Numerical Modeling and Optimization of Lead-Free Hybrid Double Perovskite Solar Cell by Using SCAPS-1D

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Syed Sajjad Hussain ◽  
Saira Riaz ◽  
Ghazi Aman Nowsherwan ◽  
Khizer Jahangir ◽  
Akram Raza ◽  
...  
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Double Perovskite ◽  
Perovskite Solar Cell ◽  
Lead Free ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

The highest power conversion efficiency (PCE) for organic-inorganic perovskite solar cells based on lead is reported as 25.2% in 2019. Lead-based hybrid perovskite materials are used in several photovoltaics applications, but these are not highly favored due to the toxicity of lead and volatility of organic cations. On the other hand, hybrid lead-free double perovskite has no such harm. In this research study, SCAPS numerical simulation is utilized to evaluate and compare the results of perovskite solar cell based on double perovskite FA 2 BiCuI 6 and standard perovskite CH 3 NH 3 PbI 3 as an active layer. The results show that the power conversion efficiency obtained in the case of FA 2 BiCuI 6 is 24.98%, while in the case of CH 3 NH 3 PbI 3 , it is reported as 26.42%. This indicates that the hybrid organic-inorganic double perovskite FA 2 BiCuI 6 has the ability to replace hybrid organic-inorganic perovskite CH 3 NH 3 PbI 3 to expand next-generation lead-free harmless materials for solar cell applications.

scholarly journals Facile synthesis of a hole transporting material with a silafluorene core for efficient mesoscopic CH3NH3PbI3 perovskite solar cells

2016 ◽  
Vol 4 (22) ◽  
pp. 8750-8754 ◽  
Author(s):  
Anurag Krishna ◽  
Dharani Sabba ◽  
Jun Yin ◽  
Annalisa Bruno ◽  
Liisa J. Antila ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Efficient Synthesis ◽  
Facile Synthesis ◽  
Hole Transporting ◽  
Hole Transporting Material

A power conversion efficiency of 11% has been obtained from a perovskite solar cell using a new silafluorene-based hole transporting material made by a short efficient synthesis.

scholarly journals Design of Dopant and Lead-Free Novel Perovskite Solar Cell for 16.85% Efficiency

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2110
Author(s):  
Syed Abdul Moiz ◽  
Ahmed N. M. Alahmadi
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Transport Layer ◽  
Lead Free ◽  
Hole Transport Layer

Halide based perovskite offers numerous advantages such as high-efficiency, low-cost, and simple fabrication for flexible solar cells. However, long-term stability as well as environmentally green lead-free applications are the real challenges for their commercialization. Generally, the best reported perovskite solar cells are composed of toxic lead (Pb) and unstable polymer as the absorber and electron/hole-transport layer, respectively. Therefore, in this study, we proposed and simulated the photovoltaic responses of lead-free absorber such as cesium titanium (IV) bromide, Cs2TiBr6 with dopant free electron phenyl-C61-butyric acid methyl ester (PCBM), and dopant free hole transport layer N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) for the Ag/BCP/PCBM/Cs2TiBr6/NPB/ITO based perovskite solar cell. After comprehensive optimization of each layer through vigorous simulations with the help of software SCAPS 1D, it is observed that the proposed solar cell can yield maximum power-conversion efficiency up to 16.85%. This efficiency is slightly better than the previously reported power-conversion efficiency of a similar type of perovskite solar cell. We believe that the outcome of this study will not only improve our knowledge, but also triggers further investigation for the dopant and lead-free perovskite solar cell.

Solution-processed indium oxide electron transporting layers for high-performance and photo-stable perovskite and organic solar cells

Nanoscale ◽  
2017 ◽  
Vol 9 (42) ◽  
pp. 16305-16312 ◽  
Author(s):  
Seokhyun Yoon ◽  
Si Joon Kim ◽  
Harrison S. Kim ◽  
Joon-Suh Park ◽  
Il Ki Han ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Indium Oxide ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Organic Solar Cell ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cell

Pin-hole free and conductive In2O3 electron transporting layers lead to a power conversion efficiency of 14.63% in a perovskite solar cell and 3.03% in an organic solar cell.

Sign in / Sign up

Export Citation Format

Share Document