A mono(carboxy)porphyrin-triazine-(bodipy)2triad as a donor for bulk heterojunction organic solar cells

2015 ◽  
Vol 3 (24) ◽  
pp. 6209-6217 ◽  
Author(s):  
Ganesh D. Sharma ◽  
S. A. Siddiqui ◽  
Agapi Nikiforou ◽  
Galateia E. Zervaki ◽  
Irene Georgakaki ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad(PorCOOH)(BDP)2has been used as a donor with ([6,6]-phenyl C71butyric acid methyl ester) (PC71BM) as an acceptor, in BHJ - solution processed organic solar cells.

The Effect of Donor:Acceptor Ratio on the Generated Photocurrent of Inkjet Printed Blended Poly (3-Octylthiophene-2.5-Diyl) and (6,6)-Phenyl C71 Butyric Acid Methyl Ester Bulk Heterojunction Organic Solar Cells

2010 ◽  
Vol 663-665 ◽  
pp. 823-827 ◽  
Author(s):  
Vivi Fauzia ◽  
Akrajas Ali Umar ◽  
Muhamad Mat Salleh ◽  
Muhammad Yahaya
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Photovoltaic Performance ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Donor And Acceptor ◽  
Butyric Acid Methyl Ester

Bulk heterojunction organic solar cells made of blended of the electron donor (D) and electron acceptor (A) molecules were fabricated using inkjet printing technique with three different D:A ratios i.e. 1:3, 1:1 and 3:1 (weight). Poly (3-octylthiophene-2,5-diyl) (P3OT) and (6,6)-phenyl C71 butyric acid methyl ester (PC71BM) were used as donor and acceptor respectively. The generated photocurrents and the power conversion efficiency depend on the donor: acceptor ratio, where the device D:A ratio 3:1 generated higher photocurrent. The photovoltaic performance of the devices may also affected by the microstructure and surface morphology of the active layer film.

Bulk-Heterojunction Organic Solar Cells Based on Phenylene-Thiophene Oligomer and Phenyl-C61-Butyric-Acid Methyl Ester

2014 ◽  
Vol E97.C (5) ◽  
pp. 405-408 ◽  
Author(s):  
Shunjiro FUJII ◽  
Takanori OKUKAWA ◽  
Zongfan DUAN ◽  
Yuichiro YANAGI ◽  
Masaya OHZEKI ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Bulk-Heterojunction Solar Cells Based on Poly(3-hexylthiophene) and (6,6)-phenyl-C61-butyric-acid Methyl Ester on Polyethylene Terephthalate Substrates

2013 ◽  
Vol 538 ◽  
pp. 3-6
Author(s):  
Yuichiro Yanagi ◽  
Takanori Okukawa ◽  
Akira Yoshida ◽  
Masaya Ohzeki ◽  
Tatsuki Yanagidate ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Polyethylene Terephthalate ◽  
Butyric Acid ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Heterojunction Solar Cells ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Pet Substrate

Bulk-heterojunction solar cells were fabricated based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) on an indium tin oxide (ITO) coated flexible polyethylene terephthalate (PET) substrate. Performance improvements of the flexible solar cells by optimizing post thermal annealing conditions are reported. The solar cells annealed at 150 oC showed the minimal deformation of the PET substrate, and the resulted conversion efficiency was 1.35% under the light irradiation conditions of the Superscript textAM1.5 simulated solar intensity of 100 mW/cm2.

Sign in / Sign up

Export Citation Format

Share Document