Condensed-phase low temperature heterogeneous hydrogenation of CO2 to methanol

2018 ◽  
Vol 8 (19) ◽  
pp. 5098-5103 ◽  
Author(s):  
Jotheeswari Kothandaraman ◽  
Robert A. Dagle ◽  
Vanessa Labarbier Dagle ◽  
Stephen D. Davidson ◽  
Eric D. Walter ◽  
...  

A low-temperature CH3OH synthesis was achieved at 120–170 °C using tertiary amine and alcohol in the presence of a Cu/ZnO/Al2O3 catalyst by CO2 hydrogenation.

2016 ◽  
Vol 3 (7) ◽  
pp. 882-895 ◽  
Author(s):  
Gunniya Hariyanandam Gunasekar ◽  
Kwangho Park ◽  
Kwang-Deog Jung ◽  
Sungho Yoon

This review highlights the recent trends in the heterogeneous hydrogenation of CO2 to formic acid/formate.


ACS Catalysis ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 3685-3693 ◽  
Author(s):  
Kah Wei Ting ◽  
Takashi Toyao ◽  
S. M. A. Hakim Siddiki ◽  
Ken-ichi Shimizu

2019 ◽  
Author(s):  
Kathryn Fowler ◽  
Paul Connolly ◽  
David Topping

Abstract. In-situ studies of low temperature cirrus clouds have found unexpectedly low ice crystal numbers and consistently high supersaturations, which suggest that our understanding of the freezing mechanisms under these conditions are incomplete. Computational models typically use homogeneous nucleation to predict the ice nucleated in supercooled water. However, the existence of ultra-viscous organic aerosol in the upper troposphere has offered alternative ice nucleation pathways, which have been observed in laboratory studies. The possible effects of aerosol viscosity on cloud micro-physical properties have traditionally been interpreted from simple model simulations of an individual aerosol particle based on equilibration timescales. In this study, to gain insight into the formation of ice in low temperature cirrus clouds, we have developed the first cloud parcel model with bin micro-physics to simulate condensed phase diffusion through each individual aerosol particle. Our findings demonstrate, for the first time, the complex relationship between the rate of ice formation and the viscosity of secondary organic aerosol, driven by two competing effects – which cannot be explained using existing modelling approaches. The first is inhibition of homogeneous ice nucleation below 200 K, due to restricted particle growth and low water volume. The second occurs at temperatures between 200 K and 220 K, where water molecules are slightly more mobile and a layer of water condenses on the outside of the particle, causing an increase in the number of frozen aerosol particles. Our new model provides a basis to better understand and simulate cirrus cloud formation on a larger scale, addressing a major source of uncertainty in climate modelling through the representation of cloud processes.


2021 ◽  
Vol 60 (SD) ◽  
pp. SDDD01
Author(s):  
Hirokazu Okawa ◽  
Hiroyasu Ito ◽  
Tatsuo Fujiwara ◽  
Yuya Kitamura ◽  
Takahiro Kato ◽  
...  

1974 ◽  
Vol 52 (14) ◽  
pp. 1336-1344 ◽  
Author(s):  
R. E. Halliwell ◽  
R. R. Parsons

The photoluminescence spectrum of phosphorus-doped silicon has been studied as a function of impurity concentration 9.0 × 1015 cm−3 ≤ ND ≤ 4.3 × 1019 cm−3 and temperature 1.9 K ≤ T ≤ 145 K. The spectra at low temperature [Formula: see text] are interpreted in terms of a condensed phase of carriers (electron–hole droplet) over the entire range of concentrations studied.


2009 ◽  
Vol 79-82 ◽  
pp. 2175-2178
Author(s):  
Bao Hua Zhang ◽  
Jun Dan Ye ◽  
Bin Chen ◽  
Yan Qing Weng

The performance of epoxy thermosets was greatly influenced by the curing agent and curing temperature. It was known that epoxy thermosets cured under high temperature would have high normal forces which could cause fracture of the structure and then decrease the mechanical properties of the material. It was accepted that epoxy curing system should be cured under low temperature with the thermosets had the same properties as those cured under high temperature. It was important to choose proper curing agent to reach the above goal. Latent epoxy curing agent whose main component was the hyperbranched polyester (HBP) with tertiary amine as the end group was prepared and was used to diglycidyl ether of bisphenol A (DGEBA) in this work. The properties such as tensile intensity, bending intensity, impact resistance and dynamic mechanic properties of the resulting epoxy thermosets were evaluated. It was found that the resulting epoxy thermosets cured under low temperature had better mechanical properties than those cured under high temperature. The latent epoxy curing agent whose main component was the hyperbranched polyester with tertiary amine as the end group was adaptive to be used in the epoxy base of composite.


RSC Advances ◽  
2016 ◽  
Vol 6 (73) ◽  
pp. 69530-69539 ◽  
Author(s):  
Yuanyuan Cui ◽  
Xi Chen ◽  
Wei-Lin Dai

Copper content played a significant role in the catalytic performance of Cu/SiO2 catalysts in dimethyl carbonate hydrogenation to methanol. Optimized hydrogenation activity was achieved over the 40Cu/SiO2 sample.


1988 ◽  
Vol 63 (3) ◽  
pp. 497-515 ◽  
Author(s):  
Yu.I. Dakhnovskii ◽  
A.A. Ovchinnikov ◽  
M.B. Semenov

Sign in / Sign up

Export Citation Format

Share Document