Enhanced effect of CdS on amorphous Mo15S19 for photocatalytic hydrogen evolution

2021 ◽  
Author(s):  
Yongkang Quan ◽  
Guorong Wang ◽  
Junke Li ◽  
Zhiliang Jin

Amorphous Mo15S19 loaded onto the surface of CdS improves the separation efficiency of photogenerated carriers, which reduces the recombination rate of photogenerated electrons and holes.

2020 ◽  
Vol 6 (39) ◽  
pp. eabb9823
Author(s):  
Huabin Zhang ◽  
Shouwei Zuo ◽  
Mei Qiu ◽  
Sibo Wang ◽  
Yongfan Zhang ◽  
...  

A cocatalyst is necessary for boosting the electron-hole separation efficiency and accelerating the reaction kinetics of semiconductors. As a result, it is of critical importance to in situ track the structural evolution of the cocatalyst during the photocatalytic process, but it remains very challenging. Here, atomically dispersed Ru atoms are decorated over multi-edged TiO2 spheres for photocatalytic hydrogen evolution. Experimental results not only demonstrate that the photogenerated electrons can be effectively transferred to the isolated Ru atoms for hydrogen evolution but also imply that the TiO2 architecture with multi-edges might facilitate the charge separation and transport. The change in valence and the evolution of electronic structure of Ru sites are well probed during the photocatalytic process. Specifically, the optimized catalyst produces the hydrogen evolution rate of 7.2 mmol g−1 hour−1, which is much higher than that of Pt-based cocatalyst systems and among the highest reported values.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Yunyan Wu ◽  
Pan Xiong ◽  
Jianchun Wu ◽  
Zengliang Huang ◽  
Jingwen Sun ◽  
...  

AbstractGraphitic carbon nitride (g-C3N4)-based photocatalysts have shown great potential in the splitting of water. However, the intrinsic drawbacks of g-C3N4, such as low surface area, poor diffusion, and charge separation efficiency, remain as the bottleneck to achieve highly efficient hydrogen evolution. Here, a hollow oxygen-incorporated g-C3N4 nanosheet (OCN) with an improved surface area of 148.5 m2 g−1 is fabricated by the multiple thermal treatments under the N2/O2 atmosphere, wherein the C–O bonds are formed through two ways of physical adsorption and doping. The physical characterization and theoretical calculation indicate that the O-adsorption can promote the generation of defects, leading to the formation of hollow morphology, while the O-doping results in reduced band gap of g-C3N4. The optimized OCN shows an excellent photocatalytic hydrogen evolution activity of 3519.6 μmol g−1 h−1 for ~ 20 h, which is over four times higher than that of g-C3N4 (850.1 μmol g−1 h−1) and outperforms most of the reported g-C3N4 catalysts.


ChemSusChem ◽  
2017 ◽  
Vol 11 (1) ◽  
pp. 276-284 ◽  
Author(s):  
Lingling Bi ◽  
Xupeng Gao ◽  
Lijing Zhang ◽  
Dejun Wang ◽  
Xiaoxin Zou ◽  
...  

2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.


2020 ◽  
Vol 10 (9) ◽  
pp. 3238
Author(s):  
Min Liu ◽  
Guangxin Wang ◽  
Panpan Xu ◽  
Yanfeng Zhu ◽  
Wuhui Li

In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for the degradation of Rhodamine B (RhB) and methylene blue (MB), under visible light irradiation. The calculated k values for the degradation of RhB and MB over Ag3PO4/SnO2/CC are 0.04716 min−1 and 0.04916 min−1, which are higher than those calculated for the reactions over Ag3PO4/SnO2, Ag3PO4/CC and SnO2/CC, respectively. The enhanced photocatalytic activity could mainly be attributed to the improved separation efficiency of photogenerated electron-hole pairs, after the formation of the Ag3PO4/SnO2/CC heterojunction. Moreover, carbon cloth with a large specific surface area and excellent conductivity was used as the substrate, which helped to increase the contact area of dye solution with photocatalysts and the rapid transfer of photogenerated electrons. Notably, when compared with the powder catalyst, the catalysts supported on carbon cloth are easier to quickly recycle from the pollutant solution, thereby reducing the probability of recontamination.


ChemSusChem ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3605-3613 ◽  
Author(s):  
Qin Lei ◽  
Rongzhi Chen ◽  
Yurong Zhao ◽  
Huanyu Chen ◽  
Xinxin Long ◽  
...  

2021 ◽  
Author(s):  
Zhilu Du ◽  
Xinyu Zhao ◽  
Yingnan Zhao ◽  
Huiying Sun ◽  
Yingqi Li ◽  
...  

Copolymerization of urea and small molecules is an effective strategy to modify g-C3N4. To in-depth study the important effects of the introduction of small molecular moiety on the structure-property relationship...


Sign in / Sign up

Export Citation Format

Share Document