In automated control systems for technical processes, the conversion of a continuous signal into a digital code and vice versa from a digital code to a continuous (analog) value is widely used. For direct type converters often used the term ADC, the reverse - DAC. The characteristics of the converters often dramatically affect the parameters of the entire automated system. The importance of the correct choice of ADCs and DACs has especially increased recently in connection with the mass introduction of microcontrollers MC. Indeed, in addition to the ADC and DAC, it is necessary to place the processor core in the microcontroller's crystal, I/O interfaces and many other elements necessary for the functioning of the MC. The use of information converters in the construction industry imposes additional requirements on converters: for example, in building monitoring systems, precision ADCs with extremely high accuracy are often required (while performance may be low), in other applications it is necessary to provide the necessary parameters at a high level of industrial interference, etc. This article explores issues related to the rational choice of ADCs and DACs, taking into account current trends in the IT field and the specifics of work in the construction industry. Sigma-Delta converters are noted as the most promising models of direct type converters.
Detection of Brucella melitensis by the BacT/Alert automated system and Brucella broth culture
