scholarly journals Frequency support from photovoltaic power plants using offline maximum power point tracking and variable droop control

2019 ◽  
Vol 13 (13) ◽  
pp. 2278-2286 ◽  
Author(s):  
Fyali Jibji‐Bukar ◽  
Olimpo Anaya‐Lara
Keyword(s):  
Power Plants ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Droop Control ◽  
Maximum Power Point ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Photovoltaic Power ◽  
Power Point

Implementaasi Maximum Power Point Tracker (MPPT) dengan topologi sepic pada pembangkit listrik tenaga surya

JURNAL ELTEK ◽  
2020 ◽  
Vol 18 (2) ◽  
pp. 1
Author(s):  
Oktriza Melfazen ◽  
M. Taqijuddin Alawiy ◽  
Denda Dewatama
Keyword(s):  
Power Plants ◽  
Solar Power ◽  
Maximum Power Point Tracking ◽  
Average Power ◽  
Maximum Power ◽  
Maximum Power Point ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Arduino Uno ◽  
Power Point

Terdapat rugi-rugi daya dalam proses menghasilkan daya pada Pembangkit Listrik Tenaga Surya (PLTS) konvensional. Sehingga energi yang dihasilkan tidak terserap secara maksimal. Sistem Pembangkit Listrik Tenaga Surya yang didesain dalam penelitian ini diharapkan dapat menghasilkan energi optimal dengan memanfaatkan kemampuan algoritma Maximum Power Point Tracking (MPPT) dengan metode Perturb and Obserb yang diaplikasikan pada topologi SEPIC. Pada penelitian ini, sistem  menggunakan panel surya berjenis amorphous 60W, sensor arus ACS712, sensor tegangan berupa pembagi tegangan dan rangkaian converter dengan topologi SEPIC yang dikontrol mikrokontroler Arduino UNO dengan sistem MPPT. Hasil penelitian yang didapat sebagai berikut: penempatan panel surya yang baik adalah menghadap atas (tegak lurus dengan permukaan bumi, sensor arus bekerja dengan eror rata-rata 1,92%, sensor tegangan mempunyai eror rata-rata 2,76%, dan topologi SEPIC dengan MPPT mempunyai hasil daya rata-rata 26,13 W.   There are power losses in the process of generating power in conventional Solar Power Plants (PLTS). So that the energy produced is not absorbed to the fullest. The Solar Power Sistem designed in this study is expected to produce optimal energy by utilizing the ability of the Maximum Power Point Tracking (MPPT) algorithm with the Perturb and Obserb method applied to the SEPIC topology. The sistem built in this study uses a 60W amorphous type solar panel, ACS712 current sensor, a voltage sensor in the form of a voltage divider and a converter circuit with a SEPIC topology controlled by an Arduino UNO microcontroller with an MPPT sistem.The results obtained as follows: a good placement of solar panels is facing upward (perpendicular to the surface of the earth, current sensors work with an average eror of 1.92%, voltage sensors have an average eror of 2.76%, and SEPIC topology with MPPT has an average power yield of 26.13 W.

Sign in / Sign up

Export Citation Format

Share Document