scholarly journals Environmental advantages of composite fuels based on industrial wastes and different ranks of coal

2018 ◽  
Vol 209 ◽  
pp. 00013
Author(s):  
Galina Nyashina
Keyword(s):  
Power Plants ◽  
Coal Dust ◽  
Thermal Power ◽  
Energy Performance ◽  
Power Industry ◽  
Industrial Wastes ◽  
Liquid Fuels ◽  
Anthropogenic Emissions ◽  
Oil Processing ◽  
Processing Wastes

Thermal power plants and boiler units generate most of the anthropogenic emissions around the world. A promising solution to many problems that heat and power industry is facing today would be switching from conventional coal dust combustion to composite liquid fuels (CLF). These are also known as coal-water slurries containing petrochemicals (CWSP). Here, we perform an experimental study of the most hazardous anthropogenic emissions (sulfur and nitrogen oxides) from the combustion of high-potential CWSP. We identify the main benefits and potential drawbacks of using CWSP in heat and power industry. A set of components and additives to CWSP are explored that significantly affect the environmental and energy performance of fuels. The anthropogenic emissions from the combustion of CWSP made of widespread coal and oil processing wastes are no higher than those from coal dust combustion. Using specialized additives to CWSP, we can change the concentrations of NOx and SOx several times. The most appealing additives to CWSP are sawdust, straw, charcoal, limestone, and glycerol.

Features of antibodies against benzo[a]pyrene formation in workers of coal mines and thermal power plants

2019 ◽  
pp. 9-14
Author(s):  
Ye. G. Polenok ◽  
S. A. Mun ◽  
L. A. Gordeeva ◽  
A. A. Glushkov ◽  
M. V. Kostyanko ◽  
...  
Keyword(s):  
Power Plant ◽  
Thermal Power Plant ◽  
Power Plants ◽  
Reference Group ◽  
Coal Dust ◽  
Thermal Power ◽  
Coal Mines ◽  
Serum Levels ◽  
Thermal Power Plants ◽  
Immune Reactions

Introduction.Coal dust and coal fi ring products contain large amounts of carcinogenic chemicals (specifically benz[a]pyrene) that are different in influence on workers of coal mines and thermal power plants. Specific immune reactions to benz[a]pyrene therefore in these categories of workers can have specific features.Objective.To reveal features of antibodies specifi c to benz[a]pyrene formation in workers of coal mines and thermal power plants.Materials and methods.The study covered A and G class antibodies against benz[a]pyrene (IgA-Bp and IgG-Bp) in serum of 705 males: 213 donors of Kemerovo blood transfusion center (group 1, reference); 293 miners(group 2) and 199 thermal power plant workers (group 3). Benz[a]pyrene conjugate with bovine serum albumin as an adsorbed antigen was subjected to immune-enzyme assay.Results.IgA-Bp levels in the miners (Me = 2.7) did not differ from those in the reference group (Me = 2.9), but in the thermal power plant workers (Me = 3.7) were reliably higher than those in healthy men and in the miners (p<0.0001). Levels of IgG-Bp in the miners (Me = 5.0) appeared to be lower than those in the reference group (Me = 6.4; (p = 0.05). IgG-Bb level in the thermal power plantworkers (Me = 7.4) exceeded the parameters in the healthy donors and the miners (p<0.0001). Non-industrial factors (age and smoking) appeared tohave no influence on specific immune reactions against benz[a]pyrene in the miners and the thermal power plant workers.Conclusions.Specific immune reactions against benz[a]pyrene in the miners and the thermal power plant workers are characterized by peculiarities: the miners demonstrate lower levels of class A serum antibodies to benz[a]pyrene; the thermal power plant workers present increased serum levels of class G antibodies to benz[a]pyrene. These peculiarities result from only the occupational features, but do not depend on such factors as age, smoking and length of service at hazardous production. It is expedient to study specific immune reactions to benz[a]pyrene in workers of coal mines and thermal power plants, to evaluate individual oncologic risk and if malignancies occur.

scholarly journals Improving the reliability, as well as energy and environmental efficiency of gas cleaning systems at TPP

2019 ◽  
Vol 11 (4) ◽  
pp. 288-293 ◽  
Author(s):  
A. T. Zamalieva ◽  
M. G. Ziganshin
Keyword(s):  
Power Plants ◽  
Stokes Equations ◽  
Coal Dust ◽  
Thermal Power ◽  
Primary Energy ◽  
Navier Stokes ◽  
Thermal Power Plants ◽  
Industrial Emissions ◽  
Gas Treatment ◽  
Gas Cleaning

Energy is the basic sector of the economy and the largest consumer of primary energy resources of any country, which is why the development of world energy is accompanied by global pressure on the environment. The issues are considered of reducing the atmospheric impact of emissions of thermal power plants, improving the reliability and working life of their units, systems, and plants as a whole. The principles are presented of development and improvement of technologies for processing industrial emissions of thermal power plants, the neutralization of which is currently relevant on a regional and global scale. Analysis is carried out of existing methods of cyclone and filtration treatment. An improved design of a cyclone filter is proposed, which allows to increase the reliability of gas turbine and steam-gas units of TPP, while ensuring the efficiency of separation of the suspended part of the flow at the gas treatment point (GTP) of TPP. Similar devices can also be used to increase the degree of cleaning atmospheric emissions released by the TPP coal dust preparation and flue gas systems at coal generation from fi ne particles of PM10 and PM2,5 classes (coal dust and ash), owing to reduction of the size of caught particles from average values for cyclones and wet scrubbers of the order of 5–10 μm to 0.5 μm. The design of the cyclone filter is improved as a result of research of cyclone filtration by methods of Computational Fluid Dynamics (CFD). A system of Reynolds-averaged equations of a single-phase Navier-Stokes flow is used for mathematical modeling of motion in the cyclone filter. To determine the efficiency of separation of the suspended part of the flow in the cyclone filter, the Rercomplex is used obtained by reducing a set comprising the Navier-Stokes equations and the equation of particle motion based on Newton's law to a dimensionless form. Numerical characteristics of the suspension sedimentation from a multiphase flow in a cyclone separator of specified dimensions are found by means of the Rercomplex. The results of bench tests of the proposed design of the cyclone filter are given. 

scholarly journals Prospects of using new technologies in Russia’s electric power industry to comply with international commitments to reduce CO2 emissions

2018 ◽  
Vol 58 ◽  
pp. 03007
Author(s):  
Alexey Tchemezov ◽  
Elena Chemezova ◽  
Anton Syromyatnikov
Keyword(s):  
Electric Power ◽  
Power Plants ◽  
New Technologies ◽  
Thermal Power ◽  
Electric Power Industry ◽  
Power Industry ◽  
International Commitments ◽  
Russian Region ◽  
Emission Of Greenhouse Gases

This study addresses the methodology of projecting the electric power industry developments, taking into account environmental constraints. I obtained quantitative assessments of long-term electric power industry development in a Russian region, determined the emission of greenhouse gases from fuel combustion at thermal power plants (TPPs), and the efficiency of technologies to reduce greenhouse gas emissions in the electric power industry.

scholarly journals Matrix method to solve inverse problem of heat transfer in heat exchangers with phase transition in heat carriers

Vestnik IGEU ◽  
2021 ◽  
pp. 68-75
Author(s):  
A.E. Barochkin
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Inverse Problem ◽  
Heat Exchangers ◽  
Power Plants ◽  
Thermal Power ◽  
Energy Performance ◽  
Steam Boiler ◽  
Resource Saving ◽  
Heat Carriers

The transition to environmentally friendly and resource-saving energy, efficient use of natural resources and energy performance are the key priorities of the state energy policy of the Russian Federation. Maximum use of heat combustion of fuel and simultaneously production of condensate water of the combustion products of natural gas is one of the directions of energy saving policy. Despite many scientific papers on the issues of utilization of flue gas heat, condensation heat exchangers are not used in most gas boiler houses, energy power providers and thermal power plants in this country. And there are several reasons to explain this fact due to the lack of universal methods to calculate and design condensation-type heat exchangers. Thus, the development of new methods to simulate multithreaded heat exchangers considering the phase transition in heat carriers is an urgent task of power engineering and industry sectors. Matrix models of heat transfer based on mass and energy balance equations are applied to solve the inverse problem of heat transfer in heat exchangers, considering the phase transition in heat carriers. A method to calculate and select the designs of multi-threaded heat exchangers, considering the phase transition in heat carriers, has been developed. The author suggests a numerical solution to choose the design of a contact economizer of a heat power plant steam boiler used for heat recovery of flue gases to illustrate the effectiveness of the proposed method. The proposed method to solve the inverse problem of heat transfer provides the possibility to identify simultaneously the most acceptable values of the parameters of heat carriers and design characteristics of heat exchangers for various purposes.

The Green Energy Fraction Parameter for Solar Thermal Power Systems

Solar Energy ◽  
2004 ◽  
Author(s):  
Aharon Roy
Keyword(s):  
Power Systems ◽  
Power Plants ◽  
Solar Power ◽  
Thermal Power ◽  
Energy Performance ◽  
Green Energy ◽  
Energy Fraction ◽  
Environmental Consequences ◽  
Project Assessment ◽  
Hybrid Power

A new solar power parameter, the green energy fraction is proposed as a useful metric for project assessment. Its concept is elucidated and the application to solar/fuel hybrid power plants is exhibited by numerical illustrations. This parameter is a simple tool for tracking the actual green energy performance of a particular plant. It proves to serve a significant yardstick for evaluating fuel avoidance, hence the environmental consequences of solar hybrid power plants. The green energy fraction provides a summation of the fuel avoidance for the whole system, simple or complex, and allows comparative evaluation between power plants for upright green energy (fuel avoidance), and thus enables standard assessments of various systems on an equal basis. It has both thermodynamic and engineering meaning and signifies one of the essential figures of merit for solar power systems. It should assist R&D management to improve technologies. Green energy entitles substantial financial benefits.

Scenario Analysis of Denitration for Chinese Coal-Fired Power Generation

2015 ◽  
Vol 814 ◽  
pp. 425-429 ◽  
Author(s):  
Xian Ce Meng ◽  
Chen Li ◽  
Su Ping Cui ◽  
Li Li Zhao ◽  
Xian Zheng Gong ◽  
...  
Keyword(s):  
Power Generation ◽  
Scenario Analysis ◽  
Power Plants ◽  
Fossil Fuels ◽  
Catalytic Reduction ◽  
Thermal Power ◽  
Power Industry ◽  
Nox Emissions ◽  
Technology Applications ◽  
Chinese Coal

The environmental loads are made due to the natural resources and fossil fuels use and pollutants emissions by Chinese thermal power industry. To explore the realistic coal-fired power generation and its denitration strategies, the input and output of coal-fired power generation in China were identified and quantified. The scope of this paper is defined in the boundary of coal-fired electricity generation system all over China. The methodology follows the principal of ISO 14040 and ISO 14044. The functional unit is “1 kWh of electricity generated”. The inventory data of Chinese coal-fired power generation in 2009 without denitration technology applications were measured. The output data include the CO, N2O, CH4, CO2, NOx, PM and SO2 emissions. NOx emissions are the major contributor of acidification and photochemical in China. To avoid catastrophic environmental damages, the air pollution especially NOx emissions from coal-fired power plants are advised to be cut. For scenario analysis, in the assumption of 100%of selective non-catalytic reduction (SNCR) technology applications, China still has denitration potential. In the coming several decades, the SNCR technology will be decisive for the Chinese coal-fired power industry to reach deeper NOx emission reductions. However, the reduction agents of ammonia and urea usage bring ammonia slip, and extra natural resource and fossils consumption. The urea use also brings extra CO2 emissions. This limits the applications of SNCR technology to reduce NOx emissions.

scholarly journals Simulating combustion processes based on digital technologies

2018 ◽  
Vol 44 ◽  
pp. 00043 ◽  
Author(s):  
Marsel Kadyrov ◽  
Maria Khabarova ◽  
Alexander Khabarov ◽  
Alexei Trinchenko
Keyword(s):  
Power Plants ◽  
Coal Dust ◽  
Thermal Power ◽  
Digital Technologies ◽  
Mathematic Model ◽  
Furnace Operation ◽  
Diffusion Kinetic ◽  
Boiler Furnace ◽  
Future Challenges ◽  
Dust Flame

The thermal power plants (TPP) make a basis of power-generation industry of the majority of countries. The global growth of power consumption and the policy of energy-saving demand to increase the efficiency of plants operation, which is, among others, determined by the technical level of steam-generating units. The up-to-date digital technologies make it possible to assess the efficiency of boiler furnace operation at the stage of boiler unit designing, its reconstruction or retrofitting and upgrading. Developed in the article are the algorithm, mathematic model and computer program of calculating diffusion-kinetic process of combustion of D-grade Donetsk coal in the coal-dust flame of boiler Е-230-14,0-520. The assigned tasks have been solved by using theoretical methods of analysis, the capabilities of devices of computer-aided calculations have utilized for visualization of results. The considered digital approach to solving technical tasks makes it possible to meet the current and future challenges.

The impacts of emission trading scheme on China’s thermal power industry: A pre-evaluation from the micro level

2019 ◽  
Vol 31 (6) ◽  
pp. 1007-1030
Author(s):  
Bingxin Zeng ◽  
Jun Xie ◽  
Xiaobing Zhang ◽  
Yang Yu ◽  
Lei Zhu
Keyword(s):  
Power Plants ◽  
Thermal Power ◽  
Emission Trading ◽  
Power Industry ◽  
Thermal Power Plants ◽  
Emission Trading Scheme ◽  
Trading System ◽  
Firm Level ◽  
Trading Scheme ◽  
Carbon Emission Trading

Emission trading scheme is known as a cost-effective measure for mitigating CO2 emissions, and recently, China has started the world's largest carbon trading system. As the most influential industry in determining China's overall CO2 emission level, the thermal power industry will be greatly affected by nationwide carbon market in the near future. This paper explores the impact of the upcoming national emission trading scheme on China's thermal power industry at firm level. First, based on empirical data of 478 thermal power plants, an empirical analytical framework of micro-firm level is constructed. Then, two kinds of policy scenarios, including no carbon emission trading and national emission trading scheme, in two different market structures have been analyzed. The results show that emission trading scheme have positive impacts on reduction of CO2 emissions among China’s power plants and can reduce the total abatement costs by 0.37%–41.5%. Furthermore, most of the thermal power plants are emissions permits buyers including all the low-emission gas-fired power plants. Additionally, compared with the perfect competition market, more than 70% of thermal power plants increase their total abatement costs in imperfect competition market. These findings provide reference for promoting the development of nationwide carbon emission trading system in China.

Sign in / Sign up

Export Citation Format

Share Document