scholarly journals The main trends of computer-aided design systems development

2018 ◽  
Vol 251 ◽  
pp. 05001 ◽  
Author(s):  
Alexander Ginzburg ◽  
Leonid Shilov ◽  
Liubov Shilova
Keyword(s):  
Statistical Analysis ◽  
Computer Aided Design ◽  
Development Trend ◽  
Automated Design ◽  
Systems Development ◽  
International Database ◽  
Computer Aided ◽  
Main Development ◽  
Design Systems ◽  
Aided Design

A review of papers in the field of development of automated design systems is presented. For the purpose of evaluation of urgency, importance and prospects of research works in the aforesaid field, the paper also includes the statistics on published works for the last five years. Based on the methods of statistical analysis and comparison, the data from the SCOPUS International Database have been collected. As a result, the main development trend in this direction has been revealed.

scholarly journals Using open source software in development of computer-aided design systems for radar

2019 ◽  
pp. 92-101
Author(s):  
A. P. Konovalchik ◽  
M. Y. Konopelkin ◽  
V. N. Korchagova ◽  
S. V. Strizhak ◽  
M. V. Kraposhin ◽  
...  
Keyword(s):  
Open Source ◽  
Open Source Software ◽  
Computer Aided Design ◽  
Strain State ◽  
Software Component ◽  
Stress Strain ◽  
Computer Aided ◽  
Main Development ◽  
Design Systems ◽  
Aided Design

The paper focuses on creation of a software component designed for the automated calculation of the stress-strain state of radar structure. The relevance of the work is shown, the statement of the problem, methods for its solution and the main development results are given

Low-fidelity prototyping with simple collaborative tabletop computer-aided design systems

2018 ◽  
Vol 70 ◽  
pp. 307-315 ◽  
Author(s):  
Erdem Kaya ◽  
Sema Alacam ◽  
Yasin Findik ◽  
Selim Balcisoy
Keyword(s):  
Computer Aided Design ◽  
Computer Aided ◽  
Design Systems ◽  
Aided Design

Development of computer-aided design systems for metal-forming processes

1989 ◽  
Vol 21 (3) ◽  
pp. 185
Author(s):  
Y. Mitani ◽  
H.R.R. Merchand ◽  
E. Velazquez
Keyword(s):  
Metal Forming ◽  
Computer Aided Design ◽  
Computer Aided ◽  
Design Systems ◽  
Aided Design

scholarly journals Verification of modeling wired antennas by the method of moments

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
A. Alhaj Hasan ◽  
◽  
A.A. Kvasnikov ◽  
S.P. Kuksenko ◽  
T.R. Gazizov ◽  
...  
Keyword(s):  
Method Of Moments ◽  
Input Impedance ◽  
Computer Aided Design ◽  
Segment Length ◽  
Good Match ◽  
Half Wave ◽  
Computer Aided ◽  
Design Systems ◽  
Aided Design ◽  
Frequency Dependences

. Modeling of several antennas by the method of moments in the TALGAT system was performed for comparison with tested results. At first, the published results for half-wave and wave dipoles are compared with our results. Current module distributions and frequency dependences of the real and imaginary parts of the input impedance are obtained. The results showed a good match. Then the published experimental and analytical results for the radiation pattern and frequency dependence of the admittance of the gull shape antenna are compared with our results. The convergence of the results with segment length decreasing is shown. A good match is obtained. It is shown that detailed testing is important in the process of implementation and development of computer-aided design systems

scholarly journals Computer-aided design systems of radiators

2013 ◽  
Vol 3 (37) ◽  
Author(s):  
Viktor Mikhaylovich Sineglazov ◽  
Dmytro Anatoliovych Svynarenko
Keyword(s):  
Computer Aided Design ◽  
Computer Aided ◽  
Design Systems ◽  
Aided Design

APPROACHES FOR THE DEVELOPMENT OF FOR AUTOMATED DESIGN AND SIMULATION OF ONBOARD NETWORKS

2021 ◽  
Vol 4 (30) ◽  
pp. 76-86
Author(s):  
V. L. Olenev ◽  
◽  
A. V. Shakhomirov ◽  
Keyword(s):  
Computer Aided Design ◽  
Aerospace Industry ◽  
Automated Design ◽  
Software Product ◽  
Computer Aided ◽  
Aided Design ◽  
New Generation ◽  
New Industry ◽  
Board Networks ◽  
Development Prospects

The article presents an analysis of the development prospects for the aerospace industry in relation to on-board systems and new-generation networks. It also presents the approaches for developing the SANDS software, intended for computer-aided design and simulation of on-board networks. Various approaches are described that will allow the existing software product to be refined and updated to meet new industry demands.

Automated Design of Optimum Belt Drives

1991 ◽  
Author(s):  
Dipendra K. Sinha ◽  
Michael T. McDonald
Keyword(s):  
Computer Aided Design ◽  
Database Management ◽  
Relevant Information ◽  
Automated Design ◽  
Drive System ◽  
Management Systems ◽  
Belt Drives ◽  
Computer Aided ◽  
Aided Design ◽  
Selection Of

Abstract The paper describes a belt design package which works from within a commercial Computer Aided Design and Drafting package (AutoCAD) environment and utilizes FORTRAN programs for design and selection of lowest weight components for the drive system. The components used in the process are available as stock items in U.S.A. The relevant information on these products is stored in commercial database management systems such as EXCEL and LOTUS 1-2-3. Output from the package consists of scaled drawing and tabular specifications.

Sign in / Sign up

Export Citation Format

Share Document